MT Tracer (12-Fiber VFI and Display)

+1 (800) 321-5298

+1 (603) 528-7780

sales@AFLglobal.com

Request Quote | Distributors

International Sales Contacts
Tech Support & Customer Service
Frequently Asked Questions

Features:

Viewing safe for eyes
CW or 2Hz (2 cycles per second) output
Direct connect - No fan-outs necessary

Applications:

Data Center - MPO Cable Verification
Test polarity, continuity, and fiber mismatch
Locate ends of unmarked cables in data centers

Download Specification Sheet

Description
Attributes
Related Documents (2)
Displaying results 1-1 (of 2)
< 1 - 2 >

Description

MT Tracer – Essential tool for Data Center Maintenance

What type of MPO cables are in your data center?

Industry standards such as EIA/TIA 568C support three configurations for MTP® / MPO cables.

Type A: One-to-one fiber wiring between connectors
Type B: One-to-one fiber wiring between connectors with one connector flipped such that fibers are wired {1 to 12, 2 to 11, 3 to 10, etc.}
Type C: Fibers flipped in pairs such that fibers are wired {(1 to 2, 2 to 1), (3 to 4, 4 to 3), etc.}

Data Centers evolve over time as upgrades to hardware bring in new equipment potentially wired to support one or more of the MPO cable standards listed above. The challenge for technicians is matching up the correct cable type with the appropriate equipment to keep systems operating.

MPO cables may (or may not) be labeled…
Labels may (or may not) be correct…
How can a technician quickly verify MPO cable type prior to installation?

NOYES MT Tracer provides quick MPO cable verification.

The MT Tracer is a compact multi-fiber visual fault identifier (red laser source) supporting 8 or 12 fiber MTP® / MPO connections. The user simply connects the 12-fiber cable directly to the unit and views the results.

Fibers can be tested individually or all at once. By progressing sequentially through the fibers, cables can be quickly checked for polarity by verifying the proper order at the output. Additionally, damaged fiber(s) are quickly identified with the MT Tracer saving trouble-shooting time when cables are put into service.

Use the MT Tracer source to trace cables in messy or un-documented setups. This provides a quick means of finding the “other end” from amongst cluttered cables. Simply connect the MT Tracer Source to one end and look for the visual red light transmitted out the opposite connector.

NOYES MT Tracer kit from AFL is a complete MTP / MPO cable polarity and continuity test solution.

Key Specifications

Wavelength: 650 nm +/-20 nm
Output Power: 1.0 mW (into each 9/125 fiber in MPO/MTP® patchcord)
Output Connector: MPO / MTP®
Safety: Class II Laser Product

Ordering Information

The MT Tracer kit includes an MT Tracer Source, MT Tracer Display, and carry case.

MT Tracer Source, which may be used as a multifiber VFI, provides 12 separately controlled visible lasers. The MT Tracer can illuminate a selected fiber or automatically sequence through all 12 fibers.
MT Tracer display uses passive optics to show the light received on each fiber being traced. When used together, the MT Tracer Source and Display provide a fast way to trace (verify connectivity) a 12-fiber link.
Source and Display units are equipped with male (pinned) 12-fiber MTP® connectors.

MT Tracer

Model	Description
MT Tracer Kit	MT Tracer Source, MT Tracer Display and carry case
MT Tracer Source	A multifiber VFI
MT Tracer Display	Provides eye-safe viewing of visible light