Fiber Optic Cable

Below are the FAQs submitted by customers regarding the Fiber Optic Cable product line.

Q: Does AFL stock any cable?
A: Yes, AFL stocks several ADSS and Loose Tube (LT) cables in various fiber counts. On hand quantities are subject to change. To find out what we have available, please contact customer service.

Q: Which should I use -- OPGW or ADSS or SkyWrap?
A: Well, as usual, the answer depends on many factors. The easiest answer is when you are building a new transmission line and shield wires must be installed. In that scenario, the incremental cost of installing optical ground wire versus standard shield wire is minimal while the benefits of a fiber optic network for internal communications, grid management, etc. are profound. Similarly, on an existing transmission line, if the shield wire is aged and needs to be replaced, that is the perfect opportunity to install optical ground wire. ADSS is ideal for installation in distribution as well as transmission environments, even when live-line installations are required. SkyWrap is helically applied on ground wires or phase conductors, and it is the ideal solution when access to overhead lines is problematic due to rugged terrain or outage limitations.

Q: Which of AFL's OPGW designs is the best?
A: Depending on the application and customer preference, the answer to this question will vary. AFL will need some basic information to assess which design(s) are suitable for use in the environment and conditions for each customer. This process will help shorten the list of options. Then it becomes a matter of preference and cost as to which one is right for you.