Cookies Use on AFL Website We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our privacy policy. Agree
Home / Product-Search

Filters

46 results for Mining
AFL downlead clamps are used to guide optical ground wire (OPGW) from the top of the structure to the splice box. AFL’s downlead clamps install easily, provide proper spacing and hold strength without damage to the cable. From poles to towers, AFL offers a full line of OPGW downlead clamps to meet the needs of any application.

AFL’s SB01 splice enclosure box provides protection from all types of elements. From weather to bullets, the iron and steel construction requires no additional protective covering. Furnished with four plugged cable ports (2 aluminum and 2 plastic) for either All-Dielectric Self-Supporting (ADSS) or Optical Ground Wire (OPGW) cables, the splice enclosure can be pre-mounted to a structure before completion of the splicing phase.

The stainless steel tube straightening tool is used to straighten the stainless steel buffer tubes on stranded stainless steel tube OPGW cables.

Temporary grips are used in stringing the ADSS during sagging and where it is necessary to make short-term catch on the ADSS.

The guide clamp is used to guide OPGW cable down steel towers, steel poles, concrete poles and wood poles to splice locations. The Guide Clamps may be bolted to the tower or poles. Additionally, adapters are available for the steel towers and steel and concrete poles.

Vibration dampers work to cancel damaging fatigue caused by wind-induced vibration. Most tuned damping devices operate best near their natural frequencies.

The 26 kV isolator kit is designed for aerial optical cable system applications in which complete electrical discontinuity is required.

AFL offers wedge dead ends that ease and speed ADSS cable installation. The ADSS Wedge Dead End is ideal in crowded distribution environments because its shorter length allows for safer and efficient installation.

Spiral vibration dampers have a helically-formed damping section sized for interplay of damper and cable to provide the action/reaction motion that opposed the natural vibration wave.

Double dead end for drilled steel pole is supplied with socket eye, Y-Clevis ball hot link, 3/4" shoulder eye bolt, 3/4" washer nut, 3/4" MF lock nut and bolted dead end.

  12