Cookies Use on AFL Website We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our privacy policy. Agree
Home / Product-Search

Filters

340 results for substation compression
Substation tee connector is designed for limited space application as found in substations. Run and tap lengths are shorter than conventional tee connectors which saves space and minimizes birdcaging problems. Tee connector is installed with standard ACA hex dies.

Substation tee connector is designed for limited space application as found in substations. Run length is shorter than conventional tee taps which saves space and allows faster installation. Tee tap is installed with standard ACA hex dies.

Compression connectors are designed to connect cables and carry full conductor current load.

Terminals are shorter than conventional terminals which saves space and allows for faster installation. Terminals are installed with standard AFL hex dies and can be supplied pre-filled if required.

Substation tee connector is designed for limited space application as found in substations.

Substation tee connector is designed for limited space application as found in substations.

Substation straight terminals are designed for limited space applications as found in substations.

A precision-made compression terminal lug used in a full range of conductor sizes with one-, two- and four-hole pads in the larger sizes. Conductor is secured by indenting the barrel with any standard compression tool made for electrical lugs.

The 5000 Series Jumper Connector is designed for AAC conductors. The jumper connector is fabricated from AFL seamless drawn aluminum. All jumper connectors are designed for limited tension use and maintain a minimum of 40% of the ASTM-rated strength of the conductor on which it is being used.

The 5000 Series Jumper Connector is designed for AAC conductors.

AFL Filler Compound (AFC) is the recommended filler for compression fittings as it improves the mechanical holding strength and conductivity of the connection. If AFC is kept in a dry place, it has an infinite shelf life.

The Swage type SWCS-AA cable support and Swage type SW2CS-AA double cable support are designed to connect cable to AAC or ACSR conductors.

Swage type SWAS-AA Split Cable Spacer and Swage type SWAS-N-AA Split Cable Spacer with NEMA Pad are designed for AAC and ACSR cable ranges.

Swage Grounding Elbows connect cables or rods at a 90-degree angle.

HiTemp Filler Compound (AFCHT) is the recommended filler for compression fittings due to its ability to improve the mechanical holding strength and conductivity of the connection. It has been designed to withstand the increased temperatures of ACSS and ACSS/TW conductors. Kept in a dry place, AFCHT has an infinite shelf life.

Swage Gauges are used to measure the diameter of the bus pipe prior to installation as well measure the final compression diameter of the Swage accessory. The SWGGB Series gauges also feature a pin and marking window to properly mark the Bus pipe insertion depth. There are 8 gauges, one for each size bus accessory.

Swage Aluminum Cable Tees are designed to connect to a NEMA pad and carry the full current of the cable using Swage Technology. Terminal pads conform to NEMA standards. These accessories vary from 230-500 kV.

AFL's HiTemp Universal Compound (HiTUC) is the recommended inhibitor as a filler for compression fittings, as well as a joint compound for pad-to-pad connections for the increased temperature requirements in today’s Utility market.

Bi-conductor and tri-conductor terminals are designed to be corona free for 345 kV and 500 kV service.

Swage Aluminum Bus Expansion Couplers are designed to compensate for expansion and contraction in bus runs. These accessories carry the full current of the bus pipe using Swage Technology. These accessories are rated for 230 kV. SXWWC-AA

Swage Aluminum Cable Terminals are designed to connect to a Cable and carry the full current of the cable using Swage Technology. Terminal pads conform to NEMA standards. These accessories vary from 230-345 kV. SWCT-AA, SWCTA-AA, SWCTA-90-AA, SW2CT-AA, SW2CTA-30-AA,SW2CTA-45-AA, SW2CTA-90-AA, SW3CT-AA, SW3CTA-45-AA, SW3CTA-90-AA

Swage Aluminum Cable Couplers are designed to connect two cable runs and carry the full current of the cable using Swage Technology. AFL offer a Swage cable to cable splice. These accessories vary from 345-500 kV. SWCC-AA

SWGC Swage Couplers join two cable or rod runs together.

Swage type terminals used to ground a cable or a rod to a 1-hole or 2-hole lug.

SWGPSwage Parallel connectors are used to connect cable-to-cable or cable-to-rod. The SWGPS Swage Split Parallel connectors are used to connect cable to another cable. It features a sliding channel for ease of installation.

  12345678910 ...