Tools Accessories

115TPUHAD Swage 115 Ton Press Assembly

A Swage 115 Ton Press Assembly is a portable construction and maintenance tool designed to Swage 6-inch bus accessories onto a bus. The power unit works with the 6-inch Head Assembly. The Catalog Number below provides everything needed for 6-inch pipe.

45TD Swage 45 Ton Die Set

A Swage 45 Ton Die Set comes with two dies per pipe size. These dies are available in 1.00" O.D. through 2.25" O.D.. Not all dies fit in one press head - Ensure you have the correct head assembly for the size dies needed.

45THA Swage 45 Ton Press Head

A Swage 45 Ton Press Head comes with the Press Head, Die Block, Die Retainers and mounting screws. There are two different press heads that fit different dies.

45TPU Swage 45 Ton Power Unit

A Swage 45 Ton Power Unit is a 45 Ton construction and maintenance tool designed to cover a full range of Swage cable and grounding accessories. The power unit works with 1.000" O.D. through 2.250" O.D. Head Assemblies. The 45TPU features a 360 degree hose swivel for ease of movement for the user to make the Swage process quick and easy.

45TPUHAD Swage 45 Ton Press Assembly

A Swage 45 Ton Press Assembly is a portable construction and maintenance tool designed to Swage cable and grounding accessories onto a cable. The power unit works with 1.00" O.D. through 2.25" O.D. Head Assemblies. The Catalog Number below provides everything needed for each pipe size. For more sizes, order extra press heads and dies from the Head and Dies section.

65TD Swage 65 Ton Die Set

A Swage 65 Ton Die Set comes with two dies per pipe size. These dies are available in 1", 1.5", 2", 2.5", 2.75" O.D., 3", 3.5" and 4" sizes. Not all dies fit in one press head - Ensure you have the correct head assembly for the size dies needed.

65THA Swage 65 Ton Press Head

A Swage 65 Ton Press Head comes with the press head, die block, die retainers and mounting screws. There are three different press heads that fit different dies. For more die sizes, order interchangeable dies from the dies section.

65TPU Swage 65 Ton Power Unit

A Swage 65 Ton Power Unit is a 65 Ton construction and maintenance tool designed to cover a full range of Swage accessories which works with all sizes of head assemblies (1", 1.5", 2", 2.75" O.D., 2.5", 3", 3.5" and 4"). The 65TPU features a 360 degree hose swivel for ease of movement for the user to make the Swage process quick and easy.

65TPUHAD Swage 65 Ton Press Assembly

The Swage 65 Ton Press Assembly is a portable construction and maintenance tool designed to Swage bus accessories onto a bus pipe or cable. The power unit works with all sizes of head assemblies (1", 1.5", 2", 2.75" O.D., 2.5", 3", 3.5" and 4"). The catalog number provided includes everything needed for each pipe size. For more sizes, order extra press heads and dies from the head and dies section. The power unit is compatible with all press head sizes.

85TPUHAD Swage 85 Ton Press Assembly

A Swage 85 Ton Press Assembly is a portable construction and maintenance tool designed to Swage 5-inch bus accessories onto a bus. The power unit works with the 5-inch Head Assembly. The Catalog Number below provides everything needed for 5-inch pipe.

Hydraulic Hoses

The 1/4” (0.635 cm) non-conductive, orange hose is made of an insulated, synthetic material. It allows a high-flow rate for faster ram movement. Hoses are available with or without couplers for operating pressures of 10,000 PSI with a 4-to-1 burst ratio. Hoses are pre-filled with oil and pressure tested. The hoses are 3/8” NPT male thread on both ends and quick disconnects are 3/8” NPT female.

SWGGB Swage Gauges

Swage Gauges are used to measure the diameter of the bus pipe prior to installation as well measure the final compression diameter of the Swage accessory. The SWGGB Series gauges also feature a pin and marking window to properly mark the Bus pipe insertion depth. There are 8 gauges, one for each size bus accessory.

SWGGC Swage Gauges

Swage Gauges are used to measure the final compression diameter of the Swage accessory. There are 8 gauges, one for each size bus accessory.

SWGRS Swage Grease

SWGRS Swage Grease is used on the back side of the Swage dies to cut down on wear between the die surface, the die block and the die head. SWGRS should be applied after every cleaning of the tool, and/or when the dies are switched out. SWGRS is sold in 4 ounce bottles.