The fan Out furcation kit used with the LG-150, LG-250, LG-350, and LG-350-AC.
This kit allows for quick addition of drop cables in LighGuard 350 closures.
Table top closure stand to be used for the LG-150/250/350/350XL closures. Can be clamped or permanently fastened to a table top to hold the closure in place during installation or maintenance. The clamp pivots 180° to allow accessibility to both sides of the frame and all cable entry ports.
The AFL DCSU Fiber Storage Unit is designed to store and organize the slack from a fiber drop that is left at an FDT.
Dual express grommets are used on the express side of the LG-350XL closure for installing additional branches.
Used with the LG-150 and LG-250 Sealed Closures. Allows for quick addition of drop cables as required. Simply replace the drop port grommets with this grommet kit. Both closures will accept standard flat drop cable or round cable up to 0.250" in diameter.
Grommet for use with the LG-600 Aerial Weathertight closure. Replaces the multi-port grommet set from the closure. Hardware included.
For use with the LG-600 Aerial Weathertight Closure. Remove the single-port grommet set from the closure and replace with the multi-port grommet set when drops are required.
The expansion kit for LG-600 FTTx includes a stacker tray module and one LG-600 SC-6-pack bracket to allow for up to six SC connections or 12 LC duplex connections.
AFL’s cable sealing grommet technology for the LightGuard® (LG) Sealed Fiber Optic Closures improves sealing technology utilizing MULTICENTRIC® Grommets that do away with time consuming tasks such as installing washers and messy sealing tapes for cable entry.
O-ring kits are used with the LG-150, LG-250, LG-350, and LG-350XL.
These brackets are used to secure sealed closures to poles or walls in a vertical orientation.
The LG-600 allows up to (12) SC connectors or (24) LC connectors (using duplex connectors) to be installed in the closure.
Single cable grommet kits are used to branch cable with drop cables (LG-350-AC) or as replacement grommets for the LG-350.
For use with all Aerial Weathertight Closures (LG-410, LG-420, LG-420 FTTx, LG-500, LG-600, and LG-600 FTTx). This pair of hanger brackets is shipped from the factory with all weathertight closures. Purchase separately for closures installed over existing utilities.
This grounding harness is suitable for use with all aerial weathertight closures.
Dual and quad express grommets are used as drop ports for the express cable while the express ports may be used to introduce small branch cables.
AFL Fiber Storage Units (FSU) are used to conveniently and safely store an extra length of cable along the support strand for later use.
This cable bracket attaches to the outer grounding studs of the LG-150/LG-250 or LG-350 for installing OPGW.
The aerial strand mount hanger is used in conjunction with the LG-350XL.
This tool is designed to help efficiently open Wrapping Tube Cable in bothend prep and mid sheath entry. The blade angle and tool shape help prevent the blade from cutting too deep.
Aerial hanger kits are suitable for use with all Aerial weathertight closures (LG-410, LG-420, LG-420-FTTx, LG-500, LG-600, LG-600-FTTx.)
The grounding harness is used with the LG-150, LG-250, and LG-350.
AFL Fiber Storage Units (FSU) are used to conveniently store an extra length of cable along the ADSS cable run for later use.
LightLink Access Solution (LLAS) terminal adapters provide the interconnect and/or demarcation of optical fibers for Fiber-to-the-Node (FTTN), Fiber-to-the-Home (FTTH), Fiber-to-the-Premise (FTTP) and Fiber-to-the-Curb (FTTC) applications.
The universal aerial bracket and extended offset bracket are used for mounting sealed closures in aerial applications from messenger wire.