Cookies Use on AFL Website We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our privacy policy. Agree
/productlist/Product-Lines/Test-and-Inspection/CCT_Connector_Cleaning_Tips/img/CCTP-25-0900
CCTP-25-0900

CCT Connector Cleaning Tips

Features:

  • Quality construction with unlimited shelf life
  • Molded sintered polymer construction assures perfect bulkhead fit and consistent performance
  • Traps and holds liquid and particle contaminants in an absorbent open cell matrix ranging from 10-25 microns
  • No fibers, binders, adhesives or outgassing that may contaminate the connector
  • The elastic cleaning head enhances entrapment of particles and oils, while allowing the tip to conform to virtually any fiber end-face geometry (8 degree, domed polish, etc.)

Applications:

  • Dual-head design permits wet and dry cleaning in one swab
  • Available for cleaning ferrule end-faces in adapters / sockets or exposed ferrules / termini on jumpers
  • Designed to work with AFL's FCC2, Fiber Connector Cleaner
  • Typically cleans connectors the first time without need for re-cleaning
  • Cleaning tips available for most common commercial and Mil Spec ferrule sizes
Displaying results 1-1 (of 2)
  < 1 - 2  > 

Product Description

CCT Connector Cleaning Tips from AFL meet the cleaning needs of today's fiber networks.

CCT Connector Cleaning Tips are a unique technology in fiber connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, CCTs are molded cleaning tips that trap contamination and wick cleaning solvents away from connector end-faces. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fiber end-face polish geometry while trapping and absorbing contaminants.  Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results.
 
CCT Connector Cleaning Tips offered by AFL are intended for cleaning the ferrule end-faces in adapters and sockets, as well as the exposed ferrules and termini of jumpers.  CCTs are available for most commercial and Military Specification ferrule sizes.


Cleaning Facts:

  • Cleaning saves time and money!
  • Dirty connectors cause a major percentage of fiber optic network failures
  • Prevention is simple – clean connectors!
  • Proper cleaning saves money by eliminating service calls caused by dirty connectors
  • Proper cleaning extends the life of connects and reduces replacement costs
  • Clean connectors maximize the performance of the network and reduce repair cost
 

Ordering Information

 

Size
(ferrule diameter)
Type
Part Number
Comments
2.5 mm
Pin
CCTP-25-0900
Examples: SC, ST, FC, etc.
2.5 mm
Socket
CCTS-25-0900
Examples: SC, ST, FC, etc.
2.0 mm
Pin
CCTP-25-0900
Mil T 29504/14 For Mil C 28876
2.0 mm
Socket
CCTS-16-0900
Mil T 29504/15 For Mil C 28876
1.6 mm
Pin
CCTP-25-0900
Mil T 29504/04 For Mil C 38999
1.6 mm
Socket
CCTS-16-0900
Mil T 29504/05 For Mil C 38999
1.25 mm
Pin
CCTP-25-0900
Examples: LC, MU
1.25 mm
Socket
CCTS-12-0900
Examples: LC, MU
MT ferrule
Pin
CCTX-MT-0900
Examples: MPO, MPX®
MT ferrule
Socket
CCTX-MT-0900
Examples: MPO, MPX®

 

Related Content