- Simple push action
- Replaceable cleaning cartridge - 750 cleaning per cartridge (NEOCLEAN-E)
- NEOCLEAN-M for MPO and MTP connectors - 600 cleans per unit
- Low cost per clean
- Cleans connectors on jumpers or in adapters
- NEOCLEAN-E for SC, FC, ST, E2000, LC and MU connectors with UPC or APC polishes
- NEOCLEAN-M for MPO and MTP connectors
- Suitable for field or laboratory use
Simple-to-Use Refillable DesignThe NEOCLEAN-E uses a simple one push action to quickly and effectively clean contamination from the ferrule end-face of connectors on jumpers or in adapters, reducing cleaning time. It is effective for removing oil, dust, and dirt particulates that can have a negative impact on fiber optic network performance. The replaceable cleaning cartridge can perform 750 cleanings, reducing cleaning cost. Available for SC, FC, ST, E2000, LC and MU connectors with UPC or APC polishes.
Clean MPO/MTP® Connectors with an Easy Push OperationThe NEOCLEAN-M is designed to clean MPO and MTP® multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO/ MTP exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector.
NEOCLEAN-M2The NEOCLEAN-M2 is designed to clean MPO-16 and MTP-16 multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M2 uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO-16/ MTP-16 exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector.
|NEOCLEAN-E1||NEOCLEAN-E for MU and LC connectors with UPC and APC polishes||8500-15-0900MZ|
|NEOCLEAN-E2||NEOCLEAN-E for SC and FC connectors with UPC and APC polishes and OptiTap connectors||8500-15-0901MZ|
|NEOCLEAN-E3||NEOCLEAN-E for SC, ST, FC and E2000 connectors with UPC and APC polishes and OptiTap connectors||8500-15-0902MZ|
|NEOCLEAN-ES1||Pack of 3 Replacement Cartridges for NEOCLEAN-E1||8500-15-0903MZ|
|NEOCLEAN-ES2||Pack of 3 Replacement Cartridges for NEOCLEAN-E2||8500-15-0904MZ|
|NEOCLEAN-ES3||Pack of 3 Replacement Cartridges for NEOCLEAN-E3||8500-15-0905MZ|
|NEOCLEAN-M||NEOCLEAN-M for MPO, MTP, and 12 fiber connectors||8500-15-0909MZ|
|NEOCLEAN-M2||NEOCLEAN M-2 for MPO, MTP, and 16 fiber connectors||8500-15-0910MZ|
Fiber Optic Connector Inspection
Inspection is an essential step in cleaning fiber optic connectors. Inspection enables the technician or installer to verify that the connector is free of contaminates that could permanently damage the connector end-face and lead to network failure. To ensure your fiber optic connectors are clean, you should follow the inspect-clean-inspect workflow.
See Fiber Optic Inspection for AFL's family of inspection products.