This product may only be available in our Australian and New Zealand markets.
Learn more about why you are seeing this message.
ols1
ols1

OLS1 LED Light Source

Features:

  • 5-Year Product Warranty
  • 3-Year Recommended Calibration Interval
  • 850 and 1300 nm LED (multimode) light source
  • Gigabit Ethernet (GBE) ready

Applications:

  • Certify 50 or 62.5 µm fibre links to TIA/EIA Standards
  • Certify Multimode fibre links for Gigabit Ethernet (GBE)
  • Test Ethernet, Token Ring, and FDDI fibre networks
  • 1300 nm port to test up to 10 km single-mode fibre links

Product Description

Cost effective – LED Source

NOYES OLS1 from AFL is two port multimode LED source for testing multimode fibre links.  Packaged in a rugged hand-held case The OLS1 is designed for technicians on the go.  The LED output is stabilised to ensure accurate test results per current TIA/EIA requirements.

 

Low Training Requirements: The OLS1 is easy to operate with only a [Wavelength/ Power] switch, which selects optical wavelengths or disables unit.

 

LED indicators [Active Output], [Battery], and [External Power] identify the currently enabled output port, battery level, and external power presence.

 

Weighing only 0.65 lb, the OLS1 is compact and convenient for field use. The OLS1 from AFL operates over 60 hours from a typical 9V alkaline battery. An AC adapter is optional for extended use.

 

50 and 62.5 µm fibre mandrels Included

Mandrels condition test cable for use in certifying both 50 and 62.5 µm fibre links for current and planned high bit rate applications including Gigabit Ethernet and 10 Gigabit Ethernet.  Mandrels apply to launch jumpers is seconds without tools and ensure loss measurements comply with TIA/EIA-568-B standard.

 

The OLS 1 light source is fully N.I.S.T. traceable.

 

Key Specifications

 

OLS1-2C

  • Wavelengths: 850 and 1300 nm
  • Output Power: -20 dBm into 62.5 µm multimode
  • Output Connectors: ST 
  • Battery: 9V Alkaline

 

Ordering Information

 

OLS1 Models

Model

Description

OLS1-2C

Operates at 850 and 1300 nm for use on Ethernet, Token Ring, and FDDI. The 1300 nm output can also be used to test short distance (up to 10 km) single-mode fibre links.

 

AC Adapter

Model

Description

4050-00-0111

90-264 VAC to 9 VDC

 

 

Related Content