Optical Light Sources

Test Port Adapters

Tool-free connector adapters allow connection of common fibre optic connectors and remove to support cleaning of launch ferule. Products with tool-free adapters include, FTS2, OLS2-Dual, OLS4, OLS7, SVA1

OLS1 LED Light Source

OLS1 LED source is a cost-effective two-port 850 nm and 1300 nm LED source for basic testing of multimode fibre networks. OLS1-2C supports testing of 50 µm and 60 µm multimode fibres.

OLS1-Dual LED Light Source with Wave ID

NOYES OLS1-Dual Light Source features 850 nm and 1300 nm LED output from a single output port and is simple to operate with only a power button and a wavelength select button. Certify 50 or 62.5 µm multimode fibre links for any 850 or 1300 nm application, including Gigabit Ethernet (GBE) per TIA/EIA standards.

OLS2-Dual Laser Source with Wave ID

NOYES OLS2-Dual is a hand-held, rugged laser source designed for performing insertion loss measurements on single-mode fibre optic links when used with an optical power meter. When paired with an optical fibre identifier, the OLS2-Dual may be used for fibre identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.

OLS7 Triple Wavelength Laser Sources

NOYES OLS7 Laser Sources offer three stabilized Laser signals from one output port. Test single-mode networks fast with dual and triple wavelength transmit modes. OLS7-FTTH: Designed specifically for testing FTTH networks with 1310, 1490, and 1550 nm wavelengths. OLS7-FTTx: Designed for testing FTTx networks at 1310, 1490, and 1625 nm wavelengths. OLS7-3: Offers 1310, 1550, and 1625 nm wavelengths for testing applications such as Telecom and CATV.

OLS4 Quad Output Light Source with Wave ID

The OLS4 Quad light source is an ideal field unit for technicians certifying both single-mode and multimode networks. Wave ID feature increases efficiency by reducing test times with simultaneous multiple wavelength tests over one fibre when using an AFL power meter such as OPM5 or OPM4.

Encircled Flux (EF) Compliant Light Sources

Mulitmode light sources - Encircled Flux (EF) compliant by design for testing fibre links per TIA/EIA 526-14-B and IEC 61280-4-1 Ed. 2.0.

Contractor Series Light Sources and Power Meters

NOYES Contractor Series Optical Light Sources and Power Meters: palm-sized tools designed for testing single-mode and multimode fibre network links. Weighing only 0.4 lb, Contractor Series units are ideal for field use.