Flex-Span ADSS expands on AFL's single jacket ADSS portfolio. Flex-Span designs are optimized for a broader combination of fiber counts and span lengths, providing ADSS system designers more flexibility in their product selection.
d13cdb732adb4d86980a1b207d6081c9
1 AFLglobal.com 1 (800) 866-7385 © 2024, AFL, all rights reserved. PP-1-00070, Revision 10, 12.11.2024 Specifications are subject to change without notice. Fiber Optic Cable 1 Applications • Electric utility distribution power lines – Framed in supply or communications space • Underground duct • Enterprise OSP networks • Fiber-to-the-X networks Features • Build America/Buy America options available • Gel-Filled Tubes are reverse-oscillated to allow slack for mid-span access – up to 288 fibers in cable – Gel-Free Buffer Tube options available – up to 216 fibers • Pole-to-pole span lengths up to 1100 feet • Single jacket design decreases the diameter and weight when compared to double jacket ADSS cable; thus reducing pole loading • No separation requirement of ADSS from conductors per National Electric Safety Code (NESC) section 235 Flex-Span ® ADSS Fiber Optic Cable AFL Flex-Span All-Dielectric Self-Supporting (ADSS) cable is designed for aerial distribution power lines, as well as underground duct applications. As its name indicates, there are no metallic components and the cable does not require a support or messenger wire. Flex-Span ADSS cables are a single jacket design intended for the shorter pole-to-pole span lengths in a distribution environment. A broad combination of fiber counts and spans lengths in this product family provide network designers with flexibility in their cable selection. Cable Components (Representative) Torque-balanced aramid Ripcord Gel-filled loose buffer tube with optical fibers FRP central member Water-blocking system Polyethylene outer jacket Optical Information Fiber Type "X" Standard Mode Field Diameter Attenuation 850 nm 1300 nm 1550 nm 250 μm Single-mode 9 ITU-T G.652D/657.A1 9.2 um nominal N/A 0.35 0.25 Corning 250 μm Single-mode AZ ITU-T G.652D/657.A1 9.2 um nominal N/A 0.35 0.25 BABA-Compliant 250 μm Single-mode BK ITU-T G.652D/657.A1 9.2 um nominal N/A 0.35 0.25 BABA-Compliant Corning 250 μm Single-mode BL ITU-T G.652D/657.A1 9.2 um nominal N/A 0.35 0.25 62.5/125 GIGA-Link 300 6 OM1 62.5 um nominal 3.5 1.2 N/A 50/125 GIGA-Link 600 5 ITU G651.1/OM2 50 um nominal 2.9 0.9 N/A 50/125 Laser-Link 300 L ITU G651.1/OM3 50 um nominal 2.9 0.9 N/A GEL FILLED GEL FREE OPTIONS continued
2 AFLglobal.com 1 (800) 866-7385 © 2024, AFL, all rights reserved. PP-1-00070, Revision 10, 12.11.2024 Specifications are subject to change without notice. Fiber Optic Cable 2 Contact AFL for your customized ADSS solution. Qualifications Governing Body Standard Code Component IEEE 1222 Cable TIA 598-D Fiber Temperature Specifications Temperature Range Operation -40ºC to +70ºC Storage -50ºC to +70ºC Installation -30ºC to +70ºC Recommended Products for ADSS Fiber Optic Cable Description AFL No. Fiber Optic Cable Accessories ADSS Formed Wire Deadends Refer to the ADSS Formed Wire Deadends spec sheet for specific AFL No. ADSS Suspension Unit Refer to the ADSS Suspension Unit spec sheet for specific AFL No. ADSS Trunnion Assemblies Refer to the ADSS Trunnion Assemblies spec sheet for specific AFL No. ADSS Temporary Grip Refer to the ADSS Temporary Grip spec sheet for specific AFL No. AGC Downlead Clamp for ADSS Refer to the AGC Downlead Clamp for ADSS spec sheet for specific AFL No. AVD Series Spiral Vibration Dampers Refer to the AVD Series Spiral Vibration Dampers spec sheet for specific AFL No. Coil Brackets Refer to the Coil Brackets spec sheet for specific AFL No. For more ADSS Cable Accessories, go to the ADSS Fiber Optic Cable Hardware web page Fiber Optic Splice Closures Apex ® X-2 Sealed Splice Closure Refer to the Apex X-2 spec sheet for specific AFL No. Apex ® X-2S Sealed Splice Closure Refer to the Apex X-2S spec sheet for specific AFL No. Flex-Span ® ADSS Fiber Optic Cable Typical Maximum Lengths Cable Diameter Reel Capacity feet meters < 0.85" (21.6 mm) 23,000 7,000 NOTE: Longer lengths may be available upon request. Reel Information Item Reel A Reel B Reel C Reel D Reel E inches cm inches cm inches cm inches cm inches cm Reel Height 42 106.7 58 147.3 66 167.6 72 167.6 84 213.4 Reel Width Outside 36 91.4 38 96.5 42 106.7 42 106.7 40 101.6 Reel Width Inside 32 81.6 32 81.3 36 91.4 36 91.4 34 86.4 Drum Diameter 23 58.7 28 71.1 36 91.4 36 91.4 35 88.9 Arbor Hole Diameter 3 7.9 3 7.9 3 7.9 3 7.9 3 7.9 Reel Weight with Lagging 180 lbs 82 kg 420 lbs 191 kg 685 lbs 311 kg 710 lbs 311 kg 950 lbs 431 kg AFL provides ADSS cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request.
Features:
- Suitable for use on distribution lines
- Gel-filled buffer tubes are S-Z stranded for easy mid-span access
- Cable is water-blocked using dry core technology, therefore no messy flooding compounds
- Design details listed below for span lengths up to 1100 ft (457 m) and fiber counts up to 144
- Requires the use of formed wire dead ends
Applications:
- Municipalities
- Co-ops
- Utilities
- Telco
- Broadband
- Enterprise
Flex-Span ADSS expands on AFL's single jacket ADSS portfolio. Flex-Span designs are optimized for a broader combination of fiber counts and span lengths, providing ADSS system designers more flexibility in their product selection. As its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass.
Flex-Span ADSS includes fiber counts up to 144 optical fibers and any type or combination of single-mode or multimode fibers within the cable. Pole-to-pole span lengths range from 50 ft. to over 1,000 ft.
HexaCore Optical Ground Wire OPGW,CentraCore Optical Ground Wire OPGW,MiniCore OPGW,OPGW hardware and accessories,Long Span ADSS,AccessWrap,High Voltage SkyWrap,SkyWrap,Metallic Aerial SelfSupporting MASS Cable,Optical Phase Conductor OPPC
1107