Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Test and Inspection 1 © 2002-2021, AFL, all rights reserved. 1574, Revision 10, 29.11.21 Specifications are subject to change without notice. F lex S can ® FS200 Single-mode OTDR Pocket-sized, Performance-packed, User-friendly, and Affordable Features • FleXpress ® mode completes OTDR tests in < 5 seconds • Test up to 1:64 PON with 25 m PON dead zone • Easy to understand LinkMap ® results with pass/fail indications • Single, dual or triple wavelength single-mode • Single port for in- and out-of-service OTDR tests • Integrated source, power meter, VFL (visual fault locator) • Integrated MPO Switch control via USB • Rugged, lightweight, hand-held for field use • Available with field-replaceable connector Applications • PON or point-to-point network verification or troubleshooting • OTDR testing plus insertion loss and power measurements • Locate faults exceeding industry or user pass/fail thresholds • Visually pinpoint location of macro-bends or breaks AFL’s FlexScan FS200 OTDR is an all-in-one solution for detecting, identifying, locating, and resolving single-mode optical network issues. It is designed for both novice and expert technicians working in a range of environments, from FTTH PON to point-to-point networks. It applies industry-standard or user-set pass/fail criteria and displays results using LinkMap colour-coded icons that immediately show the health of the network. The FlexScan FS200 automates test setup, shortens test time, and simplifies results interpretation improving efficiency and reducing costs. All-in-one test capability: The FlexScan FS200 includes an integrated VFL, power meter, and light source. It can be easily paired to AFL’s award-winning FOCIS family of inspection scopes, ensuring technicians have everything they need to locate and quickly resolve optical network issues. Performance-packed: With SmartAuto multi-pulse acquisition, up to 37 dB dynamic range, and best-in-class 25 m PON dead zone, FlexScan FS200 PON OTDRs test FTTH PONs up to 1:64 while still detecting and measuring events only meters apart. Fast! FleXpress mode completes dual-wavelength tests in < 5 seconds – 10 x faster than conventional OTDRs! For multi-fibre testing, FS200s automatically control AFL’s MFS Multi-Fibre Switch (12-fibre MPO switch) to further reduce multi-fibre test time. Pocket-sized: At 86 x 160 x 43 mm and less than 0.4 kg, FlexScan FS200 OTDRs truly fit in your pocket, yet still provide a large, bright indoor/outdoor touchscreen display, and all-day operation. Multiple sharing and reporting options: Results can be stored internally, saved to a USB, or wirelessly uploaded via the free FlexScan App for real-time reporting using the included TRM ® 3.0 Test Results Manager software. Convenient cost-saving kits: Bundle the FlexScan FS200 with your choice of fibre ring, FOCIS Flex connector inspection probe and tips, and/or AFL’s universal optical fibre identifier for significant cost-savings! Field-replaceable connector: With AFL's optional field-replaceable connector, avoid expensive service repairs to replace connectors damaged due to poor cleaning practices and/or normal wear-and-tear. Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Test and Inspection 2 © 2002-2021, AFL, all rights reserved. 1574, Revision 10, 29.11.21 Specifications are subject to change without notice. F lex S can ® FS200 Single-mode OTDR Dramatically Reduces Test Time In SmartAuto mode, FlexScan OTDRs automatically analyse and test the network using a variety of network-optimised settings to precisely locate, characterise and identify network events with one button push. Loss and reflectance are measured for connectors, splices, splitters and macro-bends. FlexScan even checks for live fibre and verifies OTDR launch quality before initiating a test. FlexScan’s new FleXpress mode completes dual-wavelength tests in seconds, reducing test time by a factor of 10x compared to conventional OTDRs. For multi-fibre testing, FleXpress mode automatically controls AFL’s MPO Switch, testing 12 fibres at the touch of a single button. Simplifies Network Troubleshooting LinkMap with pass/fail enables even novice users to easily and accurately troubleshoot optical networks. LinkMap presents an icon-based view of the tested network clearly identifying fibre start, end, connectors, splices, PON splitters, and macro-bends. A LinkMap summary provides end-to-end link length, loss and ORL. Loss and reflectance and displayed with clear pass/fail indications. Users can instantly toggle between LinkMap and Trace views. Connectivity FlexScan OTDRs easily pair with AFL's ward-winning FOCIS ® family of connector inspection probes for fast, easy single-fibre and/or multi-fibre connector end-face inspection. FlexScan results can then be transferred wirelessly via the free FlexScan App to a smart device for real-time reporting using the included Test Results Manager (TRM 3.0) PC-based software. This real-time monitoring can help avoid mistakes in the field that will require future truck rolls. OTDR, OLTS, and VFL Testing with a Single Tool FlexScan optionally includes a Wave ID optical light source (OLS) and optical power meter (OPM). With Wave ID, the OPM auto-synchronises to a single or multi- wavelength Wave ID optical signal transmitted by an AFL light source. The OPM reports detected wavelengths and measures power and loss at each wavelength, saving significant test time and eliminating setup errors. The integrated VFL’s eye-safe red laser enables users to visually pinpoint the location of macro-bends and fibre breaks often found in splice closures and fibre cabinets. Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Test and Inspection 3 © 2002-2021, AFL, all rights reserved. 1574, Revision 10, 29.11.21 Specifications are subject to change without notice. F lex S can ® FS200 Single-mode OTDR FlexScan OTDRs are available with 1310/1550/1625, 1310/1550/1650, 1310/1550, and 1550 or 1650 nm only wavelengths. The 1310 and 1550 nm versions are available with integrated optical light source (OLS), optical power meter (OPM), visual fault locator (VFL) and Bluetooth/WiFi. Specifications a MODEL: FS200-XXX -50 -60 -100 -300 -303 -304 OTDR Emitter Type Laser Safety Class b Class I Fibre Type Single-mode Wavelengths (nm) 1550 1650 1310/ 1550 1310/ 1550 1310/ 1550/ 1625 1310/ 1550/ 1650 Center λ Tolerance c 1310/1550/1650: ± 20 nm; 1625 +30/-5 nm Dynamic Range d (dB) 28 37 32/30 37/36 37/36/37 37/36/37 Event Dead Zone e (m) 1.0 0.8 0.8 0.8 0.8 0.8 Atten. Dead Zone f (m) 6.0 3.5 3.6 3.5 3.5 3.5 PON Dead Zone g (m) N/A 30 N/A 25/25 25/25/30 25/25/30 Pulse Widths 3, 5, 10, 20, 30, 50, 100, 200, 300, 500 ns; 1, 2, 3, 10 μs; 20 μs (FS200-300/300/304 only) Range Settings 250 m to 240 km Data Points Up to 300,000 (Expert mode .SOR file) Data Spacing 5 cm to 16 m Index of Refraction 1.3000 to 1.7000 Distance Uncertainty ±(1 + 0.003% x distance + data point spacing) m Linearity (dB/dB) ±0.05 Trace File Format Telcordia SR-4731 Issue 2 compatible .SOR Trace Storage Medium 4 GB internal memory (> 5000 traces typical); External USB memory stick Data Transfer to PC USB cable or Bluetooth ® (option) OTDR Modes SmartAuto, Expert, Real-time FleXpress Fast Test FS200-300/303/304 Display Modes LinkMap Summary, LinkMap Events, Trace Refresh Rate Up to 4 Hz (Real-time mode) Live Fibre Protection No OTDR damage with input power ≤ +15 dBm for wavelength(s) in range 1260 to 1675 nm Live Fibre Detection Reports live fibre with input signal ≥ -35 dBm for wavelength(s) in range 1260 to 1675 nm PON Filter Isolation > 50 dB for 1260 nm ≤ wavelength ≤ 1600 nm Live PON OTDR Test 1625 or 1650 nm using filtered detector MODEL: FS200-XXX -50 -60 -100 -300 -303 -304 VISUAL FAULT LOCATOR (VFL) Emitter Type Visible red laser, 650 ±20 nm Safety Class b Class II Output Power 0.8 mW into single-mode fibre (-1 dBm ±0.5 dB) Modes CW, 2 Hz flashing OPTICAL LASER SOURCE - OLS (Optional) Emitter Type Laser Safety Class b Class I Fibre Type Single-mode Wavelengths (nm) 1550 N/A 1310/ 1550 1310/ 1550 1310/ 1550/ 1310/ 1550/ Center λ Tolerance c ±20 nm (CW mode) Spectral Width (FWHM) 5 nm (maximum) Internal Modulation 270 Hz, 330 Hz, 1 kHz, 2 kHz, CW, Wave ID Wave ID Compatible with AFL OPM/OLS Output Power Stability ≤ ±0.1 dB (15 minutes); ≤ ±0.15 dB (8 hours) Output Power -3 dBm ±1.5 dB OPTICAL POWER METER -OPM (Optional) Calibrated Wavelengths 1310, 1490, 1550, 1625, 1650 nm Detector Type InGaAs, 1 mm diameter Measurement Range +23 to -50 dBm Tone Detect Range +3 to -35 dBm Accuracy ±0.25 dB Resolution 0.01 dB Measurement Units dB, dBm or Watts (nW, μW, mW) GENERAL Size (in boot) 86 x 160 x 43 mm Weight 0.4 kg Operational Temperature h -10 °C to +50 °C, 0 to 95 % RH (non-condensing) Storage Temperature -40 °C to +70 °C, 0 to 95 % RH (non-condensing) Power Rechargeable Li-Pol or AC adapter Battery Life >12 hours, Telcordia test conditions Display 4.3 in colour touchscreen LCD, 480 x 272, backlit USB Ports 1 host; 1 micro-USB function Bluetooth (optional) Compatible with Windows PC, Android Notes: a. All specifications valid at 25 °C unless otherwise specified. b. FDA 21 CFR 1040.10 & 1040.11, IEC 60825-1: 2014. c. Using 10 ns pulse width. d. SNR=1, longest range and pulse width, 3-minute averaging. e. Maximum distance between two points 1.5 dB down each side of a reflective peak caused by an event with reflectance ≤ -45 dB using 3 or 5 ns pulse. f. Maximum distance from the start of a trace spike caused by an event with a -45 dB (or smaller) reflectance, to the point where the trace returns to and stays within ±0.5 dB of backscatter. Test pulse width is 3 or 5 ns. g. Recovery to within 0.5 dB of backscatter after 1:16 splitter (≤13 dB loss) using 100 ns pulse width. h. Max. temperature while charging is +45ºC. Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Test and Inspection 4 © 2002-2021, AFL, all rights reserved. 1574, Revision 10, 29.11.21 Specifications are subject to change without notice. F lex S can ® FS200 Single-mode OTDR FlexScan FS200 Kit Configurations All kits include a FlexScan FS200 with AC charger, battery, carry strap, TRM ® 3.0, USB cable, and carry case. PLUS kits add a 150 m fibre ring, One-Click ® cleaner, and upgrade to TRM 3.0 Advanced. PRO kits additionally include a FOCIS Flex auto-focusing connector inspection probe with IEC pass/fail analysis and two inspection tips. Ordering Information PART NUMBER OTDR/SOURCE (NM) PON OTDR OLS / OPM BT / WIFI Dark Live FS200-50-[Kit]-[KS0x] 1550 FS200-50-[Kit]-PW-[KS0x] 1550 FS200-60-[Kit]-[KS0x] 1650 FS200-60-[Kit]-PW-[KS0x] 1650 FS200-100-[Kit]-[KS0x] 1310/1550 FS200-100-[Kit]-PW-[KS0x] 1310/1550 FS200-300-[Kit]-W-[KS0x] 1310/1550 FS200-300-[Kit]-PW-[KS0x] 1310/1550 FS200-303-[Kit]-W-[KS0x] 1310/1550/1625 FS200-303-[Kit]-PW-[KS0x] 1310/1550/1625 FS200-304-[Kit]-W-[KS0x] 1310/1550/1650 FS200-304-[Kit]-PW-[KS0x] 1310/1550/1650 FlexScan FS200 Kit Configuration [KIT] F lex S can FS200 KIT CONFIGURATION BAS Includes: FS200, soft case, TRM 3.0 Basic, USB cable PLUS Includes: BAS kit plus 150 m SMF Fibre Ring, One-Click cleaner, upgrade to TRM 3.0 Advanced, soft case PRO Includes: PLUS kit plus FOCIS Flex, 2 Inspection Tips FlexScan Port & Inspection Tip Configuration [KSO x ] OTDR PORT FIBRE RING END A FIBRE RING END B PORT INSPECTION TIP PATCHLEAD INSPECTION TIP CLEANING KS01 SCA SCA SCA SCA Uni 2.5 mm Angled 2.5mm One-Click Cleaner KS02 SCA SCA SC SC Uni 2.5 mm 2.5mm One-Click Cleaner KS03 SCA SCA LC LC Uni 1.25 mm 1.5mm One-Click Cleaner KS04 SCA SCA LCA LCA Uni 1.25 mm Angled 2.5mm One-Click Cleaner KS05 SCA SCA ST ST Uni 2.5 mm 2.5mm One-Click Cleaner Notes: For other kit configurations contact AFL Australia / New Zealand. BAS kit only available as KS01. Fibre Ring, One-Click Cleaner and TRM 3.0 Advanced only included in PLUS and PRO Kits. Inspection tips only included in PRO kits. Results can be transferred from FlexScan OTDR to TRM ® 3.0 using USB cable, or performed wirelessly (W option) after downloading free FlexScan App. The FlexScan App is available as a free download from 'Google Play' or 'App Store'. FlexScans equipped with Bluetooth option (W) support Bluetooth transfer of results via FlexScan App for remote reporting using TRM 3.0. Basic kit always ships with Medium Soft Case; PLUS and PRO kits always ship with Large Soft Case. Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Test and Inspection 5 © 2002-2021, AFL, all rights reserved. 1574, Revision 10, 29.11.21 Specifications are subject to change without notice. F lex S can ® FS200 Single-mode OTDR Ordering Information Accessories DESCRIPTION AFL NO. FlexScan wrist strap 1400-05-0230PZ FlexScan neck strap, 36” 1400-05-0231PZ AC charger 100-240 VAC to 5 VDC 4050-00-0931PR Soft carry case for FS200 kits with FOCIS Flex and Fibre Ring 1400-01-0111PZ Soft carry case for FS200 kits with FOCIS Flex, Fujikura OFI and Fibre Ring 1400-01-0128PZ Hard carry case for FS200 kits with FOCIS Flex, Fujikura OFI and Fibre Ring 1400-01-0134PZ Vehicle charger, 12VDC to 5VDC @2A 4050-00-0033MR Cable, USB-micro B, 5 pin, 6' 6000-00-0031MR 5V USB charging cable (1.5 m), type A to barrel (0.9 x 3.2 x 9 mm) 6000-00-0034PR One-Clicks, fluid, wipes, etc. See www.AFLglobal.com Cleaning Supplies Field-Replaceable OTDR Connector (Optical Port Ferrule Saver) Protect your OTDR ports from damage due to mating with dirty or damaged fibre ring s or patch cords or normal wear-and-tear. Equip your FlexScan FS200 with a field-replaceable connector, which installs in seconds and accepts AFL’s tool-free interchangeable SC, LC, FC and ST connector adapters. Replace damaged connectors in the field: When normal wear-and-tear or poor cleaning practices damage the port saver’s end-face, replace it in seconds without having to return the OTDR to a service center for an expensive and time-consuming repair. DESCRIPTION AFL NO. Field-replaceable connector; APC female to APC male 2900-58-0001MR Field-replaceable connector; APC female to UPC male 2900-58-0002MR Field-replaceable connector, UPC female to APC male 2900-58-0003MR Field-replaceable connector; UPC female to UPC male 2900-58-0004MR Connector Adapters DESCRIPTION AFL NO. OTDR/OLS PORT OPM PORT VFL PORT FC 2900-50-0002MR 2900-52-0001MR N/A SC 2900-50-0003MR 2900-52-0002MR N/A ST 2900-50-0004MR 2900-52-0003MR N/A LC 2900-50-0006MR 2900-52-0004MR N/A SC/APC 2900-50-0011MR N/A N/A 2.5 mm Universal N/A 2900-52-0005MR 2900-50-0007MR 1.25 mm Universal N/A 2900-52-0006MR 2900-50-0010MR Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Test and Inspection 6 © 2002-2021, AFL, all rights reserved. 1574, Revision 10, 29.11.21 Specifications are subject to change without notice. F lex S can ® FS200 Single-mode OTDR Test Management and Reporting Software DESCRIPTION AFL NO. TRM 3.0 with Basic License (OTDR Trace/OLTS Viewer, Batch Editor and Reports), USB delivery (included with all FS200 kits) TRM3-BASIC TRM 3.0 upgrade from Basic to Advanced License, USB delivery TRM3-UPGRADE TRM 3.0 upgrade from Basic to Advanced License, email delivery TRM3-UP-EMAIL FlexScan App (Android Google Play) Free Download Recommended Products Qualifications CATEGORY REGULATION/STANDARD QUALIFICATION CE Marking EU Compliant to relevant EU Directives on health, safety, and environmental protection, and certified with CE marking Safety/EMC/EMI IEC Compliant to IEC 61010-1 for safety requirements for electrical equipment EN Compliant to EN 61010-1 for safety requirements for electrical equipment IEC Compliant to IEC 61326-1 for EMC requirements for electrical equipment EN Compliant to EN 61326-1 for EMC requirements for electrical equipment EN Compliant to EN 55011 for EMC requirements for industrial, scientific and medical equipment Telcordia Compliant to GR-196-CORE 4.5.1 for requirements on electromagnetic interference FCC Compliant to code of federal regulations FCC 47 CFR 15 on unlicensed transmissions FDA Compliant to code of federal regulations FDA 21 CFR 1040.10 and 1040.11 on laser products IEC Compliant to IEC 60825-1 for safety of laser products RoHS EU Compliant to EU regulations Directive 2011/65/EU (RoHS 2) and Directive 2015/863 (RoHS 3) Test Method TIA Compliant to TIA-568.3-D for test and measurement requirements for premises optical fibre cabling and components IEC Compliant to IEC 11801 for test and measurement requirements for optical fibre cabling for use within premises EN Compliant to EN 50173 for test and measurement requirements for optical fibre cabling for use within premises AS/NZS Compliant to AS/NZS 3080 for test and measurement requirements for optical fibre cabling for use within premises TIA Compliant to TIA-526-7 for test procedures for installed optical fibre cable plant TIA Compliant to TIA-526-14 for test procedures for installed optical fibre cable plant IEC Compliant to IEC 14763-3 for systems and methods for the inspection and testing of installed optical fibre cabling AS/NZS Compliant to AS/NZS 14763.3 for systems and methods for the inspection and testing of installed optical fibre cabling IEC Compliant to IEC 61280-4-1 for test procedures for installed optical fibre cable plant IEC Compliant to IEC 61280-4-2 for test procedures for installed optical fibre cable plant Generic Requirement Telcordia Compliant to GR-196-CORE for generic requirements for OTDR-type equipment Telcordia Compliant to SR-4731 Issue 2 for OTDR data format IEC Compliant to IEC 61746-1 for requirements on calibration of OTDR FOCIS Flex and FOCIS Lightning (Multi-Fibre) Connector Inspection • Self-contained, tether-free, hand-held inspection solution • Auto-focus and auto-centering for fast, easy inspection • IEC, IPC and user-defined pass/fail analysis • FOCIS Lightning: extremely fast multi-fibre auto-analysis for datacom and telecom inspection applications Fujikura Optical Fibre Identifier • Works on all fibre types including BIF • Trigger lock, positive stop for optimum detection • Integrated optical power meter Contact AUSSales@AFLglobal.com to schedule a demonstration or learn how to buy. Visit www.AFLglobal.com/Test to learn more about FlexScan FS200 OTDR. International Sales and Service Contact Information available at www.AFLglobal.com/Test/Contacts