3 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors © 2018, AFL, all rights reserved. PP-3-00826, Revision 6, 10.9.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 WTA Series #6 - 4/0 Series Wedge Tap Connectors Features • Material - Connector Body—Aluminum Alloy - Connector Wedge—Aluminum Alloy - Breakaway Bolt—Aluminum - Retaining Ring—Steel - Connector Interface—6101-T6 AFL Wedge Tap Connectors are used to make complete aluminum-to-aluminum and aluminum-to- copper electrical connections. The bolted wedge technology makes installations quicker, easier and safer when compared with traditional tap connectors by eliminating the need for specialized tooling for the same type of connection. Once the appropriate pressure is obtained by the wedge, the breakaway bolt will shear off giving a visual indication that a correct installation has been made. The connector is rated for the full current of the conductors within its range. As the conductors expand and contract under thermal cycling, the C-shaped body operates within the elastic region of its mechanical properties, allowing the connection to maintain constant pressure, resulting in reliability of performance. This connector is reusable and can easily be removed by backing out the bolt, which will drive out the wedge. AFL recommends replacing the bolt and applying more inhibitor grease when reusing. The wedge tap connectors are comprised of high strength aluminum castings, a breakaway bolt and a highly conductive aluminum interface, providing a secure, reliable solution with an installation that is both fast and simple. continued Standard Packaging QUANTITY WEIGHT 50 25 lbs CONNECTOR BODY CONNECTOR WEDGE WEDGE INTERFACE BREAKAWAY BOLT RETAINING RING * Not rated for HT Conductors • Breakaway Bolt Torque: 10-12 ft-lbs - Bolt Head size: 5/8" • For use on ACSR, AAC and AAAC conductors • For Aluminum-to-Copper connections, the copper wire should be located on the bottom in order to minimize contamination. © 2018, AFL, all rights reserved. PP-3-00826, Revision 6, 10.9.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 4 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors WTA Series #6 - 4/0 Series Wedge Tap Connectors (cont.) Ordering Information LINE NO. AFL NO. RUN TAP CPI NO. CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE 1 WTA-162/162 #6 0.162" - 0.232" #6, #4 SOLID 0.162" - 0.204" 640101 2 WTA-232/162 #4, #2, #1 AAC 0.232" - 0.328" #6, #4 SOLID 0.162" - 0.231" 240100 3 WTA-232/232 #4 0.232" - 0.291" 240101 4 WTA-232/292 #2, #1 AAC 0.292" - 0.328" 240102 5 WTA-354/198 #1 ACSR, 1/0, 2/0 AAC 0.354" - 0.414" #6 ACSR, #4 AAC 0.198" - 0.231" 210103 6 WTA-354/232 #4 AAC, #2, #1 AAC 0.232" - 0.353" 210105 7 WTA-354/354 #1 ACSR, 1/0, 2/0 AAC 0.354" - 0.414" 210106 8 WTA-447/198 2/0 ACSR, 3/0 0.447" - 0.502" #6 ACSR, #4 AAC 0.198" - 0.231" 230107 9 WTA-447/232 #4, #2 AAC 0.232" - 0.291" 230108 10 WTA-447/292 #2 AAC, #1 0.292" - 0.353" 230109 11 WTA-447/354 #1 ACSR, 1/0, 2/0 AAC 0.354" - 0.446" 230110 12 WTA-447/447 2/0 ACSR, 3/0 0.447" - 0.502" 230111 13 WTA-502/198 3/0 ACSR, 4/0, 250 AAC 0.502" - 0.574" #6 ACSR, #4 AAC 0.198" - 0.249" 264111 14 WTA-502/250 #4 ACSR, #2, #1 AAC 0.250" - 0.353" 264112 15 WTA-502/354 #1 ACSR, 1/0, 2/0 AAC 0.354" - 0.446" 264113 16 WTA-502/447 2/0 ACSR, 3/0 0.447" - 0.521" 264114 17 WTA-502/522 4/0, 250 AAC 0.522" - 0.574" 264115 * For Replacement Breakaway Bolts, see page 17 of the TAPLINK ® catalog for ordering information. Contact AFL for further details. Qualifications GOVERNING BODY STANDARD CODE ANSI C119.4 5 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors © 2018, AFL, all rights reserved. PP-3-00827, Revision 6, 10.9.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 continued WTA Series 350 Series Wedge Tap Connectors CONNECTOR BODY CONNECTOR WEDGE WEDGE INTERFACE BREAKAWAY BOLT RETAINING RING * Not rated for HT Conductors Features • Material - Connector Body—Aluminum Alloy - Connector Wedge—Aluminum Alloy - Breakaway Bolt—Aluminum - Retaining Ring—Steel - Connector Interface—6101-T6 AFL Wedge Tap Connectors are used to make complete aluminum-to-aluminum and aluminum-to- copper electrical connections. The bolted wedge technology makes installations quicker, easier and safer when compared with traditional tap connectors by eliminating the need for specialized tooling for the same type of connection. Once the appropriate pressure is obtained by the wedge, the breakaway bolt will shear off giving a visual indication that a correct installation has been made. The connector is rated for the full current of the conductors within its range. As the conductors expand and contract under thermal cycling, the C-shaped body operates within the elastic region of its mechanical properties, allowing the connection to maintain constant pressure, resulting in reliability of performance. This connector is reusable and can easily be removed by backing out the bolt, which will drive out the wedge. AFL recommends replacing the bolt and applying more inhibitor grease when reusing. The wedge tap connectors are comprised of high strength aluminum castings, a breakaway bolt and a highly conductive aluminum interface, providing a secure, reliable solution with an installation that is both fast and simple. Standard Packaging QUANTITY WEIGHT 50 25 lbs • Breakaway Bolt Torque: 10-12 ft-lbs - Bolt Head size: 5/8" • For use on ACSR, AAC and AAAC conductors • For Aluminum-to-Copper connections, the copper wire should be located on the bottom in order to minimize contamination. © 2018, AFL, all rights reserved. PP-3-00827, Revision 6, 10.9.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 6 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors * For Replacement Breakaway Bolts, see page 17 of the TAPLINK ® catalog for ordering information. Contact AFL for further details. Qualifications GOVERNING BODY STANDARD CODE ANSI C119.4 WTA Series 350 Series Wedge Tap Connectors (cont.) Ordering Information LINE NO. AFL NO. RUN TAP CPI NO. CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE 1 WTA-609/162 266.8 ACSR, 300 MCM, 336.4 AAC, 336.4 ACSR 18/1, 350 MCM 0.609" - 0.684" #6, #4 AAC 0.162" - 0.231" 350117 2 WTA-609/232 #4 0.232" - 0.291" 350118 3 WTA-609/292 #2, #1 AAC 0.292" - 0.327" 350119 4 WTA-609/328 #1, 1/0 AAC 0.328" - 0.397" 350120 5 WTA-609/398 1/0 ACSR, 2/0 0.398" - 0.446" 350121 6 WTA-609/447 2/0 ACSR, 3/0 0.447" - 0.521" 350122 7 WTA-609/522 4/0, 250 0.522" - 0.591" 350123 8 WTA-609/592 266.8 -19 AAC, 300 AAC, 266.8 ACSR 0.592" - 0.664" 350124 9 WTA-609/665 300 ACSR 26/7, 350, 336.4 18/1 0.665" - 0.684" 350125 7 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors © 2018, AFL, all rights reserved. PP-3-00828, Revision 6, 10.9.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 continued WTB Series 336.4 - 636 Series Wedge Tap Connectors CONNECTOR BODY WEDGE INTERFACE BREAKAWAY BOLT CONNECTOR WEDGE RETAINING RING * Not rated for HT Conductors Features • Material - Connector Body—Aluminum Alloy - Connector Wedge—Aluminum Alloy - Breakaway Bolt—Aluminum - Retaining Ring—Steel - Connector Interface—6101-T6 AFL Wedge Tap Connectors are used to make complete aluminum-to-aluminum and aluminum-to- copper electrical connections. The bolted wedge technology makes installations quicker, easier and safer when compared with traditional tap connectors by eliminating the need for specialized tooling for the same type of connection. Once the appropriate pressure is obtained by the wedge, the breakaway bolt will shear off giving a visual indication that a correct installation has been made. The connector is rated for the full current of the conductors within its range. As the conductors expand and contract under thermal cycling, the C-shaped body operates within the elastic region of its mechanical properties, allowing the connection to maintain constant pressure, resulting in reliability of performance. This connector is reusable and can easily be removed by backing out the bolt, which will drive out the wedge. AFL recommends replacing the bolt and applying more inhibitor grease when reusing. The wedge tap connectors are comprised of high strength aluminum castings, a breakaway bolt and a highly conductive aluminum interface, providing a secure, reliable solution with an installation that is both fast and simple. Standard Packaging QUANTITY WEIGHT 25 32 lbs • Breakaway Bolt Torque: 10-12 ft-lbs - Bolt Head size: 3/4" • For use on ACSR, AAC and AAAC • For Aluminum-to-Copper connections, the copper wire should be located on the bottom in order to minimize contamination. © 2018, AFL, all rights reserved. PP-3-00828, Revision 6, 10.9.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 8 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors * For Replacement Breakaway Bolts, see page 17 of the TAPLINK ® catalog for ordering information. Contact AFL for further details. Qualifications GOVERNING BODY STANDARD CODE ANSI C119.4 WTB Series 336.4 - 636 Series Wedge Connectors (cont.) Ordering Information LINE NO. AFL NO. RUN TAP CPI NO. CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE 1 WTB-666/162 336.4, 350 MCM, 397 ACSR 18/1 0.666" - 0.743" #6, #4 0.162" - 0.256" 336200 2 WTB-666/257 #4 ACSR, #2, 1/0 AAC 0.257" - 0.367" 336104 3 WTB-666/368 1/0, 2/0, 3/0 0.368" - 0.521" 336012 4 WTB-666/522 4/0 ACSR, 266.8 AAC 0.522" - 0.641" 336866 5 WTB-666/642 266.8 ACSR 36/7, 336.4, 397.5 0.642" - 0.806" 336718 6 WTB-769/184 397 ACSR 24/7, 450 MCM, 477, 500 MCM, 556.5 AAC 0.769" - 0.858" #6 AAC, #4, #2 0.184" - 0.316" 477057 7 WTB-769/292 #2, 1/0 0.292" - 0.398" 477962 8 WTB-769/398 1/0 ACSR, 2/0, 3/0 AAC 0.398" - 0.501" 477853 9 WTB-769/502 3/0 ACSR, 4/0, 250, 266.8, 300 AAC 0.502" - 0.627" 477724 10 WTB-769/628 266.8 ACSR 36/7, 300 AAC, 336.4, 397.5 ACSR 24/7 0.628" - 0.772" 477633 11 WTB-769/720 336.4 ACSR 26/7, 397, 477, 500 MCM, 556 AAC 0.720" - 0.858" 477434 12 WTB-856/162 477 ACSR 26/7, 556, 600 MCM, 636 ACSR 18/1, 605 ACSR 0.856" - 0.953" #6, #4, #2 0.162" - 0.316" 556956 13 WTB-856/292 #2, #1, 1/0 0.292" - 0.398" 556892 14 WTB-856/368 1/0, 2/0, 3/0, 4/0 AAC 0.368" - 0.521" 556783 15 WTB-856/522 4/0, 250, 266.8, 300 MCM, 336 AAC, 350 MCM 0.522" - 0.679" 556638 16 WTB-856/680 350 MCM, 336.4, 397.5, 477 AAC 0.680" - 0.806" 556504 17 WTB-856/795 397 ACSR 30/7, 477, 500 MCM, 556.5, 636 AAC 0.795" - 0.918" 556294 18 WTB-856/914 556.5 ACSR 24/7, 636 AAC, 636 ACSR 18/1, 605 0.914" - 0.952" 556294-1 9 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors © 2018, AFL, all rights reserved. PP-3-00829, Revision 6, 10.14.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 continued WTC Series 795 - 1272 Series Wedge Tap Connectors CONNECTOR BODY WEDGE INTERFACE CONNECTOR WEDGE BREAKAWAY BOLT RETAINING RING * Not rated for HT Conductors Features • Material - Connector Body—Aluminum Alloy - Connector Wedge—Aluminum Alloy - Breakaway Bolt—Aluminum - Retaining Ring—Steel - Connector Interface—6101-T6 AFL Wedge Tap Connectors are used to make complete aluminum-to-aluminum and aluminum-to- copper electrical connections. The bolted wedge technology makes installations quicker, easier and safer when compared with traditional tap connectors by eliminating the need for specialized tooling for the same type of connection. Once the appropriate pressure is obtained by the wedge, the breakaway bolt will shear off giving a visual indication that a correct installation has been made. The connector is rated for the full current of the conductors within its range. As the conductors expand and contract under thermal cycling, the C-shaped body operates within the elastic region of its mechanical properties, allowing the connection to maintain constant pressure, resulting in reliability of performance. This connector is reusable and can easily be removed by backing out the bolt, which will drive out the wedge. AFL recommends replacing the bolt and applying more inhibitor grease when reusing. The wedge tap connectors are comprised of high strength aluminum castings, a breakaway bolt and a highly conductive aluminum interface, providing a secure, reliable solution with an installation that is both fast and simple. Standard Packaging QUANTITY WEIGHT 20 40 lbs • Breakaway Bolt Torque: 10-12 ft-lbs - Bolt Head size: 3/4" • For use on ACSR, AAC and AAAC • For Aluminum-to-Copper connections, the copper wire should be located on the bottom in order to minimize contamination. © 2018, AFL, all rights reserved. PP-3-00829, Revision 6, 10.14.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 10 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors * For Replacement Breakaway Bolts, see page 17 of the TAPLINK ® catalog for ordering information. Contact AFL for further details. Qualifications GOVERNING BODY STANDARD CODE ANSI C119.4 WTC Series 795 - 1272 Series Wedge Tap Connectors (cont.) Ordering Information LINE NO. AFL NO. RUN TAP CPI NO. CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE 1 WTC-973/162 636 ACSR, 715, 750 MCM, 795, 900 MCM 0.973" - 1.108" #6, #4, #2 AAC 0.162" - 0.315" 795454 2 WTC-973/316 #2 ACSR, #1, 1/0, 2/0 AAC 0.316" - 0.446" 795360 3 WTC-973/447 2/0 ACSR, 3/0, 4/0, 250 AAC 0.447" - 0.585" 795218 4 WTC-973/586 266.8, 300 MCM, 350 MCM, 336.4 ACSR 18/1 0.586" - 0.719" 795050 5 WTC-973/720 336.4 ACSR 26/7, 450 MCM, 500 MCM, 477, 556.5 AAC 0.720" - 0.878" 795920 6 WTC-973/879 477 ACSR 30/7, 556.5 ACSR, 600 MCM, 605 MCM, 636 ACSR 18/1, 715.5 AAC 0.879" - 0.990" 795730 7 WTC-973/991 636 ACSR 26/7, 750 MCM, 715, 795, 900 MCM 0.991" - 1.108" 795594 8 WTC-1124/162 954, 900 ACSR, 1000 MCM, 1113 AAC, 1033.5 AAC 1.124" - 1.196" #6, #4, #2 AAC 0.162" - 0.315" 954420 9 WTC-1124/316 #2 ACSR, #1, 1/0, 2/0 AAC 0.316" - 0.446" 954320 10 WTC-1124/447 2/0 ACSR, 3/0, 4/0, 250 AAC 0.447" - 0.585" 954175 11 WTC-1124/586 266.8, 300 MCM, 350 MCM, 366.4 ACSR 18/1 0.586" - 0.719" 954030 12 WTC-1124/720 366.4 ACSR 26/7, 450 MCM, 397.5, 477, 500 MCM, 556.5 AAC 0.720" - 0.857" 954870 13 WTC-1124/858 477 ACSR 26/7, 556, 605, 715 AAC, 636 ACSR 26/7 0.858" - 0.999" 954660 14 WTC-1124/1000 666.6 ACSR 24/7, 715 ACSR, 795, 900 AAC 1.000" - 1.106" 954484 15 WTC-1124/1107 795 ACSR 26/7, 954, 1113 MCM, 900 ACSR, 1000 MCM, 1033.5 AAC 1.107" - 1.196" 954390 16 WTC-1212/162 1033.5 ACSR, 1113 ACSR, 1192 AAC, 1272 AAC 1.212" - 1.300" #6, #4, #2 AAC 0.162" - 0.315" 103370 17 WTC-1212/316 #2 ACSR, #1, 1/0, 2/0 AAC 0.316" - 0.446" 103260 18 WTC-1212/447 2/0 ACSR, 3/0, 4/0 AAC 0.447" - 0.562" 103110 19 WTC-1212/563 4/0 ACSR, 250 MCM, 266.8, 300 MCM 0.563" - 0.664" 103945 20 WTC-1212/665 350 MCM, 336.4, 397.5, 450 MCM 0.665" - 0.794" 103780 21 WTC-1212/795 397.5 ACSR 30/7, 477, 500 MCM, 556 AAC, 600 MCM 0.795" - 0.913" 119793 22 WTC-1212/914 556.5 ACSR 24/7, 636, 715 ACSR 24/7, 750 MCM, 795 AAC 0.914" - 1.039" 103680 23 WTC-1212/1040 795 ACSR 36/1, 900, 954 AAC, 1000 AAC, 1113 MCM 1.040" - 1.161" 103580 24 WTC-1212/1162 900 ACSR 45/7, 1033.5, 954 ACSR, 1192.5 AAC 1.162" - 1.258" 103380 25 WTC-1212/1212 1113 ACSR, 1272 AAC 1.212" - 1.300" 119250 11 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors © 2018, AFL, all rights reserved. PP-3-00830, Revision 6, 10.14.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 continued WTD Series 1272 - 1590 Series Wedge Tap Connectors Features • Material - Connector Body—Aluminum Alloy - Connector Wedge—Aluminum Alloy - Breakaway Bolt—Aluminum - Retaining Ring—Steel - Connector Interface—6101-T6 AFL Wedge Tap Connectors are used to make complete aluminum-to-aluminum and aluminum-to- copper electrical connections. The bolted wedge technology makes installations quicker, easier and safer when compared with traditional tap connectors by eliminating the need for specialized tooling for the same type of connection. Once the appropriate pressure is obtained by the wedge, the breakaway bolt will shear off giving a visual indication that a correct installation has been made. The connector is rated for the full current of the conductors within its range. As the conductors expand and contract under thermal cycling, the C-shaped body operates within the elastic region of its mechanical properties, allowing the connection to maintain constant pressure, resulting in reliability of performance. This connector is reusable and can easily be removed by backing out the bolt, which will drive out the wedge. AFL recommends replacing the bolt and applying more inhibitor grease when reusing. The wedge tap connectors are comprised of high strength aluminum castings, a breakaway bolt and a highly conductive aluminum interface, providing a secure, reliable solution with an installation that is both fast and simple. Standard Packaging QUANTITY WEIGHT 10 32 lbs • Breakaway Bolt Torque: 10-12 ft-lbs - Bolt Head size: 3/4" • For use on ACSR, AAC and AAAC • For Aluminum-to-Copper connections, the copper wire should be located on the bottom in order to minimize contamination. CONNECTOR BODY WEDGE INTERFACE BREAKAWAY BOLT CONNECTOR WEDGE RETAINING RING * Not rated for HT Conductors © 2018, AFL, all rights reserved. PP-3-00830, Revision 6, 10.14.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 12 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors * For Replacement Breakaway Bolts, see page 17 of the TAPLINK ® catalog for ordering information. Contact AFL for further details. Qualifications GOVERNING BODY STANDARD CODE ANSI C119.4 WTD Series 1272 - 1590 Series Wedge Tap Connectors (cont.) Ordering Information LINE NO. AFL NO. RUN TAP CPI NO. CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE CONDUCTOR SIZE CONDUCTOR DIAMETER RANGE 1 WTD-1345/316 1272 ACSR 45/7 1272 ACSR 54/19 1351.5 ACSR 54/19 1431 AAC 61 1590 AAC 61 1590 ACSR 45/7 1.345"-1.504" #2 ACSR, #1, 1/0, 2/0, 4/0 AAC, 3/0 ACSR 0.316"-0.550" 135002, 159400 2 WTD-1345/551 250 AAC, 336.4 ACSR 26/7, 397 AAC 0.551"-0.731" 159336 3 WTD-1345/732 336.4 ACSR 30/7, 450 MCM, 500 MCM, 477, 556.5 AAC, 477 ACSR 26/7 0.732"-0.861" 135397 4 WTD-1345/862 556.5 ACSR 30/7, 605 ACSR 26/7, 715 AAC 0.862"-0.979" — 5 WTD-1345/980 636 ACSR 18/1, 795 AAC, 795 ACSR 36/1 0.980"-1.087" 159795, 135636, 159796 6 WTD-1345/1088 795 ACSR 54/7, 954 ACSR 45/7, 900, 1000, 1033.5 AAC 1.088"-1.185" 127954 7 WTD-1345/1186 954 ACSR 54/7, 1113 ACSR 45/7, 1113, 1192.5 AAC 1.186"-1.275" — 8 WTD-1345/1276 1272 ACSR 45/7, 1272, 1351.5 AAC 1.276"-1.356" 127127, 127143, 159127 9 WTD-1345/1357 1272 ACSR 54/19, 1431 AAC, 1431 ACSR 45/7 1.357"-1.431" 135135, 127128 10 WTD-1345/1432 1590 AAC, 1590 ACSR 45/7 1.432"-1.504" 159159 13 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors © 2018, AFL, all rights reserved. PP-3-00836, Revision 6, 10.9.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 continued Wedge Pad Tap Connectors 2-HOLE PAD TAP 4-HOLE PAD TAP * Not rated for HT Conductors Features • Material - Connector Pad Tap Body—Aluminum Alloy - Connector Wedge—Aluminum Alloy - Wedge Interface—6101-T6 - Breakaway Bolt—Aluminum - Retaining Ring—Steel The C-shaped body of AFL's Pad Tap connector includes a 2-hole or 4-hole NEMA pad that can be used to connect various NEMA devices to aluminum and copper conductors. The bolted wedge technology makes installations quicker, easier and safer when compared with traditional tap connectors by eliminating the need for specialized tooling for the same type of connection. Once the appropriate pressure is obtained by the wedge, the breakaway bolt will shear off giving a visual indication that a correct installation has been made. The connector is rated for the full current of the conductors within its range. As the conductors expand and contract under thermal cycling, the C-shaped body operates within the elastic region of its mechanical properties, allowing the connection to maintain constant pressure, resulting in reliability of performance. This connector is reusable and can easily be removed by backing out the bolt, which will drive out the wedge. The wedge tap connectors are comprised of high strength aluminum castings, a breakaway bolt, and a highly conductive aluminum interface, providing a secure, reliable solution with an installation that is both fast and simple. • Breakaway Bolt Torque: 10-12 ft-lbs - Bolt Head size: 3/4" • For use on ACSR, AAC and AAAC conductors Standard Packaging QUANTITY WEIGHT 10 40 lbs FIG. 2 FIG. 1 CONNECTOR PAD TAP BODY CONNECTOR WEDGE BREAKAWAY BOLT WEDGE INTERFACE RETAINING RING CONNECTOR PAD TAP BODY CONNECTOR WEDGE BREAKAWAY BOLT WEDGE INTERFACE RETAINING RING © 2018, AFL, all rights reserved. PP-3-00836, Revision 6, 10.9.2020 Specifications are subject to change without notice. AFLglobal.com | 800.866.7385 14 TAPLINK ® Wedge Connectors TAPLINK ® Wedge Connectors * For Replacement Breakaway Bolts, see page 17 of the TAPLINK ® catalog for ordering information. Contact AFL for further details. Qualifications GOVERNING BODY STANDARD CODE ANSI C119.4 Ordering Information LINE NO. AFL NO. FIG. NO. CONDUCTOR EST. WEIGHT CPI NO. SIZE DIAMETER RANGE 1 PT2B-292 1 #2, 1/0, 2/0 AAC 0.292" - 0.413" 4.66 lbs 723210-1 2 PT4B-292 2 4.98 lbs 723210 3 PT2B-414 1 2/0, 3/0 0.414" - 0.521" 4.63 lbs 723003-1 4 PT4B-414 2 4.95 lbs 723003 5 PT2B-522 1 4/0, 250, 266.8, 300, 350, 336.4 AAC, 336.4 ACSR 18/1 & 26/7 0.522" - 0.719" 4.57 lbs 723004-1 6 PT4B-522 2 4.89 lbs 723004 7 PT2B-720 1 336.4 ACSR 30/7, 397.5, 450, 477, 500, 556.5 AAC, 556.5 ACSR 18/1 & 24/7, 636 AAC 0.720" - 0.917" 4.46 lbs 723005-1 8 PT4B-720 2 4.78 lbs 723005 9 PT2D-918 1 556.5 ACSR 26 & 30/7, 605, 715, 750, 636, 666.6, 795, 900, 954 AAC 0.918" - 1.124" 4.35 lbs 723006-1 10 PT4D-918 2 4.67 lbs 723006 11 PT2D-1125 1 954, 1000 (954) 1.125" - 1.215" 4.29 lbs 723007-1 12 PT4D-1125 2 4.61 lbs 723007 13 PT2D-1216 1 1033 AAC, 1272 AAC 1.216" - 1.302" 4.23 lbs 723008-1 14 PT4D-1216 2 4.55 lbs 723008 Wedge Pad Tap Connectors (cont.)