CCT Connector Cleaning Tips from AFL meet the cleaning needs of today's fibre networks. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fibre end-face polish geometry while trapping and absorbing contaminants. Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results. Sizes are available for all commonly used connectors.
f91a7ea590bd491b850efa3ffcd13d92
1 Test & Inspection AFLglobal.com | 800.235.3423 Cleaning Supplies Cleaning Sticks CCT Connector Cleaning Tips ©2020, AFL, all rights reserved. CSTK-00-2000 Revision AA 2020-10-22 Specifications are subject to change without notice . Ordering Information DESCRIPTION TUBE COLOR STICKS QTY AFL NO. CCT CONNECTOR CLEANING TIPS - DOUBLE-ENDED For exposed 2.5 mm, 2.0 mm, 1.6 mm, 1.25 mm ferrules and termini (FC, SC, ST, LC, MU, etc., jumpers, male MIL T 29504/14 for MIL C 28876 and MIL T 29504/04 for MIL C38999) Yellow 20 CCTP-25-0900MZ For 2.5 mm ferrule in adapters or sockets (SC, FC, ST, etc. in adapters) Blue 40 CCTS-25-0900MZ For 1.25 mm ferrule in adapters or sockets (LC, MU, etc., in adapters) Green 40 CCTS-12-0900MZ For MT-RJ connectors and 2.0 mm and 1.6 mm termini in sockets (female MIL T 29504/15 for MIL C 28876 and MIL T 29504/05 for MIL C 38999, MT-RJ both jumpers and adapters) Orange 40 CCTS-16-0900MZ For Biconic and MT ferrule connectors both jumpers and in adapters (Biconic, MTP, MPO, MPX, etc.) Pink 20 CCTX-MT-0900MZ CCT TIPS ARE AVAILABLE IN BULK PACKS OF SINGLE-ENDED STICKS. PACKS OF 50 STICKS PACKAGED IN BOXES OF 6 PACKS (300 sticks) For exposed 2.5 mm, 2.0 mm, 1.6 mm, 1.25 mm ferrules and termini (FC, SC, ST, LC, MU, etc., jumpers, male MIL T 29504/14 for MIL C 28876 and MIL T 29504/04 for MIL C 38999) Yellow 300 CCTP-25-0910MZ For 2.5 mm ferrule in adapters or sockets (SC, FC, ST, etc. in adapters) Blue 300 CCTS-25-0910MZ For 1.25 mm ferrule in adapters or sockets (LC, MU, etc., in adapters) Green 300 CCTS-12-0910MZ For MT-RJ connectors and 2.0 mm and 1.6 mm termini in sockets (female MIL T 29504/15 for MIL C 28876 and MIL T 29504/05 for MIL C 38999, MT-RJ both jumpers and adapters) Orange 300 CCTS-16-0910MZ For Biconic and MT ferrule connectors both jumpers and in adapters (Biconic, MTP, MPO, MPX, etc.) Pink 300 CCTX-MT-0910MZ CCT Connector Cleaning Tips are a unique technology for fiber connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, CCTs are molded cleaning tips that trap contamination and wick cleaning solvents away from connector end-faces. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fiber end-face polish geometry while trapping and absorbing contaminants. They are designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results. CCT Connector Cleaning Tips Configurations • CCTS and CCTX series: cleaning tip is exposed for cleaning ferrule end-faces in alignment sleeves that are recessed within sockets or bulkhead adaptors • CCTP series: cleaning tip is recessed in the “straw” for cleaning exposed ferrules and termini (jumpers). Fits 2.5 mm and smaller ferrules Features • Molded sintered polymer construction • Traps and holds liquid and particle contaminant • Quality construction with unlimited shelf life Applications • Clean ferrule end-faces on jumpers and in adapters • Clean most common commercial and Mil Spec ferrule sizes • Combine with AFL's FCC2 Fiber Connector Cleaner for wet/dry cleaning
2 Test & Inspection AFLglobal.com | 800.235.3423 Cleaning Supplies Cleaning Sticks Cletop Adapter Cleaning Sticks (ACT) ©2020, AFL, all rights reserved. CSTK-00-2000 Revision AA 2020-10-22 Specifications are subject to change without notice . Contact Sales@AFLglobal.com to schedule a demonstration or learn how to buy. Visit www.AFLglobal.com/Clean to learn more about Cleaning Sticks and Cletop Sticks. International Sales and Service Contact Information available at www.AFLglobal.com/Test/Contacts Ordering Information DESCRIPTION APPLICABLE CONNECTORS AFL NO. ACT-01 — 2.5 mm Cletop Sticks (Box of 200) FC, SC, ST, D4 8500-10-0024MZ ACT-02 — 1.25 mm Cletop Sticks (Box of 200) LC, MU 8500-10-0022MZ ACT-03 — 2.0 mm Cletop Sticks (Box of 200) Military termini, high definition television camera connectors such as LEMO 8500-10-0023MZ Double-ended 2.0/2.5 mm Cletop Sticks (Box of 100) Military termini, high definition television camera connectors such as LEMO 8500-10-0030MZ Cletop ACTs offered by AFL are an easy and efficient means of cleaning fiber optics connectors in adapters and cleaning alignment sleeves. Cletop sticks are available in sizes for most common commercial connectors (ST, SC, FC, LC, MU), military connectors, and LEMO connectors for video applications. When connectors need to be cleaned inside adapters, you can rely on the Cletop stick. Features • Easy to use and efficient • Delivers a consistently high level of cleaning performance • Available for most common commercial connectors (ST, SC, FC, & MU) Applications • Clean ferrule end-faces inside the plug-in fiber optic connectors and various adapters • Cleans adapter alignments sleeves • Cleans LEMO connectors for video applications Procedure: 1. Insert - Ensure that stick is held straight when inserting into sleeve. 2. Load - Apply sufficient pressure (approximately 600-700 g) to ensure ferrule is a little depressed in sleeve. 3. Rotate stick clockwise 4-5 times while ensuring direct contact with ferrule end-face is maintained. Recommended Cleaning Procedure for ACT Cleaning Sticks Recommended Products One-Click ® Cleaners • Patented single-action • Variety of sizes and types • Low cost per clean FiberWipes • Lint free and fully optical grade • Robust and tear-resistant • Softer than traditional cellulose wipes FCC2 Cleaning Fluid • Unique dispenser for use with AFL Connector Cleaning Tips and FiberWipes • Dissipates static charge • Up to 400+ cleanings per can Notes : 1. Number of possible wipes: Maintenance (repair) - approximately 1 use; Equipment construction - 4 uses (max.) 2. FCC2 Fluid will improve cleaning performance.
Features:
- Quality construction with unlimited shelf life
- Molded sintered polymer construction assures perfect bulkhead fit and consistent performance
- Traps and holds liquid and particle contaminants in an absorbent open cell matrix ranging from 10-25 microns
- No fibers, binders, adhesives or outgassing that may contaminate the connector
- The elastic cleaning head enhances entrapment of particles and oils, while allowing the tip to conform to virtually any fiber end-face geometry (8 degree, domed polish, etc.)
Applications:
- Dual-head design permits wet and dry cleaning in one swab
- Available for cleaning ferrule end-faces in adapters / sockets or exposed ferrules / termini on jumpers
- Cleaning tips available for most common commercial and Mil Spec ferrule sizes
- Designed to work with AFL's FCC2, Fibre Connector Cleaner
CCT Connector Cleaning Tips from AFL meet the cleaning needs of today's fibre networks.
CCT Connector Cleaning Tips are a unique technology in fibre connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, CCTs are molded cleaning tips that trap contamination and wick cleaning solvents away from connector end-faces. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fibre end-face polish geometry while trapping and absorbing contaminants. Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results.
CCT Connector Cleaning Tips offered by AFL are intended for cleaning the ferrule end-faces in adapters and sockets, as well as the exposed ferrules and termini of jumpers. CCTs are available for most commercial and Military Specification ferrule sizes.
Cleaning Facts:
- Cleaning saves time and money!
- Dirty connectors cause a major percentage of fibre optic network failures
- Prevention is simple – clean connectors!
- Proper cleaning saves money by eliminating service calls caused by dirty connectors
- Proper cleaning extends the life of connects and reduces replacement costs
- Clean connectors maximise the performance of the network and reduce repair cost
Ordering Information
|
Size
(ferrule diameter) |
Type
|
Part Number
|
Comments
|
|
2.5 mm
|
Pin
|
CCTP-25-0900
|
Examples: SC, ST, FC, etc.
|
|
2.5 mm
|
Socket
|
CCTS-25-0900
|
Examples: SC, ST, FC, etc.
|
|
2.0 mm
|
Pin
|
CCTP-25-0900
|
Mil T 29504/14 For Mil C 28876
|
|
2.0 mm
|
Socket
|
CCTS-16-0900
|
Mil T 29504/15 For Mil C 28876
|
|
1.6 mm
|
Pin
|
CCTP-25-0900
|
Mil T 29504/04 For Mil C 38999
|
|
1.6 mm
|
Socket
|
CCTS-16-0900
|
Mil T 29504/05 For Mil C 38999
|
|
1.25 mm
|
Pin
|
CCTP-25-0900
|
Examples: LC, MU
|
|
1.25 mm
|
Socket
|
CCTS-12-0900
|
Examples: LC, MU
|
|
MT ferrule
|
Pin
|
CCTX-MT-0900
|
Examples: MPO, MPX®
|
|
MT ferrule
|
Socket
|
CCTX-MT-0900
|
Examples: MPO, MPX®
|
CLETOP ACT Adapter Cleaning Sticks,CS 1 Cotton Swabs,FCC2 Enhanced Formula Connector Cleaner and Preparation Fluid,FCC3 Debris Destroyer Fiber Cleaning Pen,One-Click® Cleaners ,NEOCLEAN,One-Click® Cleaner MPO / MPO-16,One-Click® D-LC,One-Click® Ultra Cleaner 2.5,CLETOP Original Series Connector Cleaners,CLETOP S Series Optical Connector Cleaner,FCP Field Portable Connector Cleaning Kits,FCP1 Connector Cleaning Kits,WFW and FA1 FiberWipes and FiberAide
561
CCT Connector Cleaning Tips
Close
CCT Connector Cleaning Tips
Features:
- Quality construction with unlimited shelf life
- Molded sintered polymer construction assures perfect bulkhead fit and consistent performance
- Traps and holds liquid and particle contaminants in an absorbent open cell matrix ranging from 10-25 microns
- No fibers, binders, adhesives or outgassing that may contaminate the connector
- The elastic cleaning head enhances entrapment of particles and oils, while allowing the tip to conform to virtually any fiber end-face geometry (8 degree, domed polish, etc.)
Applications:
- Dual-head design permits wet and dry cleaning in one swab
- Available for cleaning ferrule end-faces in adapters / sockets or exposed ferrules / termini on jumpers
- Cleaning tips available for most common commercial and Mil Spec ferrule sizes
- Designed to work with AFL's FCC2, Fibre Connector Cleaner