HiTemp ® Series Accessories for 3M ™ ACCR Patent Pending 3M is a trademark of the 3M Company. 3M ™ ACCR Conductor Close up of 3M ACCR core material, consisting of aluminum oxide fibers embedded in high-purity aluminum. Strong, Lightweight, High Capacity 3M Aluminum Conductor Composite Reinforced (ACCR) is an all-aluminum-based conductor designed to as much as double transmission capacity, even in challenging situations and environments. The tremendous advantages of 3M ACCR are due to innovations in the materials used. Compared to conventional steel core conductors, the 3M ACCR core features higher strength to weight ratio and lower thermal expansion. These two properties result in lower sag at higher operating temperatures enabling higher ampacities at equivalent tensions and clearances. In addition, the conductor features low creep, higher electrical conductivity (from the aluminum constituent), durability and longevity equivalent to ACSR, and corrosion resistance without coatings and barriers (similar to all-aluminum conductors). Physical Characteristics Core Strands Each strand of 3M ACCR core wire is reinforced with tens of thousands of ultra high-strength aluminum oxide fibers. This type of material is called a fiber reinforced metal matrix composite and confers the properties that make 3M ACCR conductor lightweight, while performing with high strength and low sag at high temperatures. This is because the fiber reinforced metal matrix composite has strength equivalent to steel, with weight (density) similar to aluminum, but with less thermal expansion than steel and strength retention at high temperatures. Aluminum Outer Strands The aluminum strands are composed of an aluminum-zirconium alloy. They are available in both round and trapezoidal shapes. The minimum conductivity of any individual aluminum strand is not less than 60% of the International Annealed Copper Standard (IACS). The aluminum-zirconium strands are a hard drawn aluminum with mechanical properties very similar to 1350-H19 aluminum (23-25 ksi, 158-172 MPa ultimate tensile strength). This is NOT a soft annealed aluminum. The addition of a small amount of zirconium to the aluminum confers the property of heat resistance. That is, the aluminum-zirconium may be heated to high temperatures, without softening (annealing). Thus when the aluminum-zirconium cools to ambient temperatures, it retains its strength. Conductor Stranding 3M ACCR uses constructions that are similar to ACSR, using most of the same dimensions for wire sizes and conductor sizes. Aluminum-zirconium layers are helically stranded using the same lay lengths and lay directions as ACSR. The core wires are also helically stranded. Both the core and outer strands contribute to the strength and conductivity of the conductor. The result is a solution specifically designed for high-temperature operation – providing dramatic ampacity gains with significantly less sag than standard options. Core Property Comparison: ACCR vs. ACSR / ACSS CONDUCTOR CORE MATERIAL ACCR ALUMINUM MATRIX ACSR / ACSS STEEL Strength (ksi) 200 185 Density (lbs/in 3 ) 0.122 0.282 Strength/Density 1,681 656 Co-efficient of Thermal Expansion (10 -6 /°F) 3.5 6.7 HiTemp ® Accessories for 3M ™ ACCR 1 2 3 4 6 5 PHYSICAL PROPERTIES UNIT LINNET 336 IBIS 397 HAWK 477 DOVE 557 GROSBEAK 636 Designation ACCR-336-T16 ACCR-397-T16 ACCR-477-T16 ACCR-557-T16 ACCR-636-T16 Stranding 26/7 26/7 26/7 26/7 26/7 Diameter Individual Core Wire in 0.089 0.097 0.105 0.116 0.122 Individual Aluminum Wire in 0.114 0.125 0.134 0.149 0.156 Total Core in 0.267 0.291 0.314 0.347 0.365 Total Conductor in 0.724 0.791 0.852 0.941 0.991 Area Aluminum in 2 0.267 0.318 0.369 0.450 0.500 Total Area in 2 0.310 0.370 0.429 0.524 0.581 Weight Core lbs/ft 0.066 0.078 0.090 0.110 0.122 Aluminum lbs/ft 0.320 0.382 0.443 0.540 0.599 Total Weight lbs/ft 0.385 0.460 0.533 0.650 0.721 Strength lbs 13,900 16,500 19,200 23,100 25,600 REF # DESCRIPTION ACCR0336T16 ACCR0397T16 ACCR0477T16 ACCR0557T16 ACCR0636T16 1 Single Tongue Dead End Eye or Clevis with 15 degree terminal SE0336T13HT SE0397T13HT SE0477T13HT SE0557T13HT SE0636T16HT 2 Double Tongue Dead End Eye with 15 degree terminal DE0336T16HT DE0397T16HT DE0477T16HT DE0557T16HT DE0636T16HT 3 Joint (Splice) JT0336T16HT JT0397T16HT JT0477T16HT JT0557T16HT JT0636T16HT 4 Jumper Connector JU0336T16HT JU0397T16HT JU0477T16HT JU0557T16HT JU0636T16HT 5 Repair Sleeve RS0336T16HT RS0397T16HT RS0477T16HT RS0557T16HT RS0636T16HT 6 Terminal 0 degree T000336T16HT T000397T16HT T000477T16HT T000557T16HT T000636T16HT 7 Terminal 15 degree T150336T16HT T150397T16HT T150477T16HT T150557T16HT T150636T16HT 8 Terminal 90 degree T900336T16HT T900397T16HT T900477T16HT T900557T16HT T900636T16HT 9 Open Run Tee Connector TTOC0336T16HT TTOC0397T16HT TTOC0477T16HT TTOC0557T16HT TTOC0636T16HT 10 Open Run Tee Tap TTOP0336T16HT TTOP0397T16HT TTOP0477T16HT TTOP0557T16HT TTOP0636T16HT 11 Stockbridge Damper 1704-6 1704-7 1704-7 1705-8 1706-9 1. All part numbers are for voltages less than 345 kV. 2. Stockbridge damper sizes shown are for applications on bare conductor (without armor rods). AFL has specially designed and engineered these products to provide improved heat dissipation. HiTemp Compression Accessories are designed to operate significantly cooler than the conductor thus extending the life of the hardware. The HiTemp product line is rated for conductor operation up to 250°C. Patent Pending Patent Pending 7 8 9 10 11 -13-14-15 -15 -13-14-15 -15 SHAPE OF CATALOG 1701, 1702, 1703, 1704 & 1705 WEIGHTS 1 3 2 DRAKE 795 CARDINAL 954 CURLEW 1033 FINCH 1113 PHEASANT 1272 MARTIN 1351 FALCON 1590 ACCR-795-T16 ACCR-954-T13 ACCR-1033-T13 ACCR-1113-T13 ACCR-1272-T13 ACCR-1351-T13 ACCR-1590-T13 26/19 54/19 54/19 54/19 54/19 54/19 54/19 0.083 0.080 0.083 0.086 0.092 0.094 0.103 0.178 0.134 0.139 0.144 0.153 0.157 0.172 0.416 0.402 0.416 0.432 0.460 0.472 0.516 1.128 1.205 1.247 1.295 1.379 1.415 1.547 0.648 0.760 0.814 0.877 0.995 1.048 1.252 0.751 0.856 0.917 0.989 1.121 1.180 1.411 0.154 0.144 0.154 0.166 0.195 0.206 0.245 0.776 0.915 0.980 1.057 1.197 1.260 1.506 0.930 1.059 1.134 1.223 1.392 1.466 1.751 32,200 33,200 35,600 38,400 43,000 45,300 53,600 CATALOG NUMBERS ACCR0795T16 ACCR0954T13 ACCR1033T13 ACCR1113T13 ACCR1272T13 ACCR1351T13 ACCR1590T13 SE0795T16HT SE0954T13HT SE1033T13HT SE1113T13HT SC1272T13HT SE1351T13HT SE1590T13HT DE0795T16HT DE0954T13HT DE1033T13HT DE1113T13HT DC1272T13HT DE1351T13HT DE1590T13HT JT0795T16HT JT0954T13HT JT1033T13HT JT1113T13HT JT1272T13HT JT1351T13HT JT1590T13HT JU0795T16HT JU0954T13HT JU1033T13HT JU1113T13HT JU12727T13HT JU1351T13HT JU1590T13HT RS0795T16HT RS0954T13HT RS1033T13HT RS1113T13HT RS1272T13HT RS1351T13HT RS1590T13HT T000795T16HT T000954T13HT T001033T13HT T001113T13HT T001272T13HT T001351T13HT T001590T13HT T150795T16HT T150954T13HT T151033T13HT T151113T13HT T151272T13HT T151351T13HT T151590T13HT T900795T16HT T900954T13HT T901033T13HT T901113T13HT T9012672T13HT T901351T13HT T901590T13HT TTOC0795T16HT TTOC0954T13HT TTOC1033T13HT TTOC1113T13HT TTOC1272T13HT TTOC1351T13HT TTOC1590T13HT TTOP0795T16HT TTOP0954T13HT TTOP1033T13HT TTOP1113T13HT TTOP1272T13HT TTOP1351T13HT TTOP1590T13HT 1706-10 1706-10 1707-11 1707-11 1707-13 1708-13 1708-14 HiTemp Compression Accessories are fabricated from a specially tempered aluminum that will transfer elevated current and dissipate increased heat more efficiently. The high strength steel eyes and sleeves maintain a permanent connection to the conductor core. The steel will not weaken at elevated temperatures and the entire conductor ensures 95% of the ASTM-rated strength. Catalog Number Configuration ORDERING EXAMPLE: SE0340T16HTNTEHV Single eye dead end for conductor code "0340T16", high temperature, no terminal, for 345 kV and above. SE = Single Tongue Eye Attachment SC = Single Tongue Clevis Attachment DE = Double Tongue Eye Attachment 3M Wire Code Designation HT = High Temperature Accessory Blank = With 15 degree terminal NT = No terminal included Blank - voltage <345 kV EHV - voltage ≥345 kV SE HT 0336T16 NT EHV Compression Dead End for 3M ™ ACCR Eye or Clevis Type, Single Tongue T S R T A T A T R S B (approximate before compression) Compression Dead End assemblies for 3M ACCR are specifically designed for 3M's Aluminum Conductor Composite Reinforced product. The aluminum body of the dead end is fabricated from seamless drawn aluminum. The tongue and terminal pad are constructed with a 15º angle, which permits the terminal connector to be bolted in the straight or 30º position. Each dead end assembly comes with a dead end body, steel eye or clevis, 15º terminal and aluminum hardware. CATALOG NUMBER CONDUCTOR DIMENSION DIE SIZE AFCHT COMPOUND (LBS.) WEIGHT* (LBS.) SIZE DIA. B ALUMINUM STEEL DEAD END TERMINAL TOTAL IN MM SE0155TWT25HT 155-T25 ACCR/TW 0.471 27.30 693.42 10024AH-ACCR 10014SH-ACCR 0.37 0.12 0.50 8.2 SE0131T58HT 131-T58 ACCR 0.523 27.30 693.42 10024AH-ACCR 10014SH-ACCR 0.37 0.12 0.50 7.9 SE0245TWT20HT 245-T20 ACCR/TW 0.576 28.88 733.55 10024AH-ACCR 10014SH-ACCR 0.38 0.33 0.75 8.5 SE0207T23HT 207-T23 ACCR 0.582 27.30 693.42 10024AH-ACCR 10014SH-ACCR 0.37 0.12 0.50 7.9 SE0236T16HT 236-T16 ACCR 0.603 29.76 755.90 10036AH-ACCR 10014SH-ACCR 0.70 0.10 1.00 18.2 SE0237T23HT 237-T23 ACCR 0.622 27.30 693.42 10024AH-ACCR 10012SH-ACCR 0.37 0.12 0.50 7.9 SE0162T81HT 162-T81 ACCR 0.623 29.06 738.12 10030AH-ACCR 10016SH-ACCR 0.67 0.30 1.00 12.8 SE0267T16HT 267-T16 ACCR 0.630 27.30 693.42 10024AH-ACCR 10014SH-ACCR 0.37 0.12 0.50 7.9 SE0267T23HT 267-T23 ACCR 0.660 27.30 693.42 10024AH-ACCR 10014SH-ACCR 0.37 0.12 0.50 7.9 SE0300T16HT 300-T16 ACCR 0.680 27.30 693.42 10024AH-ACCR 10014SH-ACCR 0.37 0.12 0.50 7.9 SE0270T35HT 270-T35 ACCR 0.693 30.56 776.22 10030AH-ACCR 10014SH-ACCR 0.67 0.30 1.00 13.2 SC0183T114HT 183-T114 ACCR 0.719 35.35 897.89 10034AH-ACCR 10020SH-ACCR 0.67 0.30 1.00 25.3 SE0336T16HT 336-T16 ACCR 0.724 27.30 693.42 10024AH-ACCR 10012SH-ACCR 0.37 0.12 0.50 7.9 SE0373T13HT 373-T13 ACCR 0.748 29.05 737.87 10027AH-ACCR 10014SH-ACCR 0.37 0.10 1.00 12.7 SE0382T16HT 382-T16 ACCR 0.768 29.05 737.87 10027AH-ACCR 10014SH-ACCR 0.37 0.10 1.00 12.7 SE0427T13HT 427-T13 ACCR 0.800 29.06 738.12 C9813-10029AH-ACCR 10014SH-ACCR 0.67 0.30 1.00 12.8 SE0397T23HT 397-T23 ACCR 0.809 30.06 763.52 10030AH-ACCR 10016SH-ACCR 0.67 0.30 1.00 12.3 SE0477T16HT 477-T16 ACCR 0.858 29.06 738.12 10030AH-ACCR 10014SH-ACCR 0.67 0.30 1.00 12.8 SE0477T13HT 477-T13 ACCR 0.860 29.06 738.12 10030AH-ACCR 10014SH-ACCR 0.67 0.30 1.00 12.7 SE0590TWT13HT 590-T13 ACCR/TW 0.860 29.06 738.12 10030AH-ACCR 10014SH-ACCR 0.67 0.30 1.00 12.7 SE0675TWT11HT 675-T11 ACCR/TW 0.902 29.94 760.48 10034AH-ACCR 10014SH-ACCR 0.67 0.30 1.00 26.1 SE0477T23HT 477-T23 ACCR 0.903 37.35 948.69 10036AH-ACCR 10016SH-ACCR 0.75 0.25 1.00 18.1 SE0665TWT16HT 665-T16 ACCR/TW 0.919 30.20 767.08 10034AH-ACCR 10016SH-ACCR 0.67 0.30 1.00 13.5 SE0557T16HT 557-T16 ACCR 0.941 30.06 763.52 10034AH-ACCR 10016SH-ACCR 0.67 0.30 1.00 25.3 * Weight includes terminal. Contact AFL for adjustable dead end options. CATALOG NUMBER CONDUCTOR DIMENSION DIE SIZE AFCHT COMPOUND (LBS.) WEIGHT* (LBS.) SIZE DIA. B ALUMINUM STEEL DEAD END TERMINAL TOTAL IN MM SE0605T13HT 605-T13 ACCR 0.941 30.06 763.52 10034AH-ACCR 10014SH-ACCR 0.67 0.30 1.00 14.8 SE0636T10HT 636-T10 ACCR 0.962 30.31 769.87 10036AH-ACCR 10014SH-ACCR 0.66 0.10 1.00 17.8 SE0557T23HT 557-T23 ACCR 0.970 30.31 769.87 10036AH-ACCR 10018SH-ACCR 0.66 0.10 1.00 17.8 SE0636T16HT 636-T16 ACCR 0.990 30.06 763.52 10034AH-ACCR 10016SH-ACCR 0.67 0.30 1.00 25.3 SE0636T16HTSP1 636-T16 ACCR 0.990 30.06 763.52 10034AH-ACCR 10016SH-ACCR 0.67 0.30 1.00 25.7 SE0795TWT13HT 795-T13 ACCR/TW 0.992 30.56 776.22 10040AH-ACCR 10016SH-ACCR 1.00 0.54 1.50 26.2 SE0763TWT17HT 763-T17 ACCR/TW 0.996 30.56 776.22 10040AH-ACCR 10018SH-ACCR 1.00 0.54 1.50 26.3 SE0680T19HT 680-T19 ACCR 1.039 30.31 769.87 10036AH-ACCR 10016SH-ACCR 0.66 0.10 1.00 17.8 SE0715T13HT 715-T13 ACCR 1.040 30.06 763.52 10034AH-ACCR 10016SH-ACCR 0.67 0.30 1.00 25.3 SE0715T16HT 715-T16 ACCR 1.050 30.06 763.52 10034AH-ACCR 10016SH-ACCR 0.67 0.30 1.00 25.3 SE0780T10HT 780-T10 ACCR 1.067 30.06 763.52 10034AH-ACCR 10014SH-ACCR 0.67 0.30 1.00 25.3 SC0958TWT16HT 958-T16 ACCR/TW 1.099 37.07 941.58 10042AH-ACCR 10020SH-ACCR 1.50 0.66 2.20 34.4 SE0958TWT16HT 958-T16 ACCR/TW 1.099 36.30 922.02 10042AH-ACCR 10020SH-ACCR 1.50 0.66 2.20 30.1 SE0795T16HT 795-T16 ACCR 1.108 30.56 776.22 10040AH-ACCR 10018SH-ACCR 1.00 0.54 1.50 26.2 SE0795T1 3HT 795-T13 ACCR 1.112 30.56 776.22 10040AH-ACCR 10016SH-ACCR 1.00 0.54 1.50 26.2 SE1033TWT13HT 1033-T13 ACCR/TW 1.129 34.31 871.47 10044AH-ACCR 10018SH-ACCR 1.00 0.54 1.50 30.3 SE0558T73HT 558-T73 ACCR 1.132 45.71 1161.03 10048AH-ACCR 10024SH-ACCR 1.50 0.66 2.20 41.1 SC0788T26HT 788-T26 ACCR 1.151 46.28 1175.51 10042AH-ACCR 10020SH-ACCR 1.50 - 1.50 32.4 SE0951T10HT 951-T10 ACCR 1.178 46.28 1175.51 10042AH-ACCR 10016SH-ACCR 1.50 0.30 1.50 18.9 SE0668T61HT 668-T61 ACCR 1.195 46.31 1176.27 10048AH-ACCR 10024SH-ACCR 1.50 0.66 2.20 41.5 SE0954T13HT 954-T13 ACCR 1.200 37.27 946.66 10042AH-ACCR 10018SH-ACCR 1.00 0.50 1.50 30.6 SE1158TWT13HT 1158-T13 ACCR/TW 1.201 33.06 839.72 10044AH-ACCR 10018SH-ACCR 1.00 0.54 1.50 30.3 SE1059T09HT 1059-T9 ACCR 1.238 33.06 839.72 10044AH-ACCR 10016SH-ACCR 1.00 0.54 1.50 30.3 SE1033T13HT 1033-T13 ACCR 1.240 34.31 871.47 10044AH-ACCR 10018SH-ACCR 1.00 0.54 1.50 30.3 SE1113T13HT 1113-T13 ACCR 1.290 33.06 839.72 10044AH-ACCR 10018SH-ACCR 1.00 0.54 1.50 30.3 SE1272T11HT 1272-T11 ACCR 1.350 34.32 871.73 10048AH-ACCR 10018SH-ACCR 1.30 0.66 2.00 32.0 SC1272T13HT 1272-T13 ACCR 1.381 36.38 924.05 10048AH-ACCR 10020SH-ACCR 1.30 0.66 2.00 39.8 SE1272T09HT 1272-T9 ACCR 1.382 33.69 855.73 10048AH-ACCR 10016SH-ACCR 1.30 0.66 2.00 32.7 SE1085T37HT 1085-T37 ACCR 1.408 46.31 1176.27 10048AH-ACCR 10024SH-ACCR 1.30 0.66 2.00 33.1 SC1351T13HT 1351-T13 ACCR 1.415 36.38 924.05 10048AH-ACCR 10020SH-ACCR 1.00 0.54 1.54 39.8 SC1622TWT13HT 1622-T13 ACCR/TW 1.417 36.38 924.05 C9813-10049AH-ACCR 10020SH-ACCR 1.00 0.51 1.50 45.2 SC1403T15HT 1403-T15 ACCR 1.464 36.38 924.05 10050AH-ACCR 10020SH-ACCR 1.00 0.51 1.50 45.2 SE1538T15HT 1538-T15 ACCR 1.530 38.46 976.88 10050AH-ACCR 10022SH-ACCR 1.00 0.51 1.50 46.1 SC1590T11HT 1590-T11 ACCR 1.532 36.38 924.05 10048AH-ACCR 10020SH-ACCR 1.00 0.54 1.54 39.8 SC1742T09HT 1742-T09 ACCR 1.588 36.38 924.05 10050AH-ACCR 10020SH-ACCR 1.00 0.51 1.50 45.2 * Weight includes terminal. Contact AFL for adjustable dead end options. Compression Dead End for 3M ™ ACCR Eye or Clevis Type, Single Tongue Compression Dead End for 3M ACCR C E G F D CATALOG NUMBER CONDUCTOR DIMENSIONS IN INCHES SIZE DIA C D E F G H K L M N P SE0155TWT25HT 155-T25 ACCR/TW 0.471 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0131T58HT 131-T58 ACCR 0.523 2.12 0.88 0.81 2.50 0.69 — — — — — — SE0245TWT20HT 245-T20 ACCR/TW 0.576 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0207T23HT 207-T23 ACCR 0.582 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0236T16HT 236-T16 ACCR 0.603 3.00 1.25 1.00 2.62 0.88 — — — — — — SE0237T23HT 237-T23 ACCR 0.622 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0162T81HT 162-T81 ACCR 0.623 2.62 1.25 0.88 2.69 0.75 — — — — — — SE0267T16HT 267-T16 ACCR 0.630 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0267T23HT 267-T23 ACCR 0.660 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0300T16HT 300-T16 ACCR 0.680 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0270T35HT 270-T35 ACCR 0.693 2.62 1.25 0.88 2.69 0.75 — — — — — — SC0183T114HT 183-T114 ACCR 0.719 — — — — — 2.81 1.62 6.00 1.12 1.75 3.50 SE0336T16HT 336-T16 ACCR 0.724 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0373T13HT 373-T13 ACCR 0.748 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0382T16HT 382-T16 ACCR 0.768 2.13 0.88 0.81 2.50 0.69 — — — — — — SE0427T13HT 427-T13 ACCR 0.800 2.62 1.25 0.88 2.69 0.75 — — — — — — SE0397T23HT 397-T23 ACCR 0.809 2.62 1.25 0.94 2.69 0.75 — — — — — — SE0477T16HT 477-T16 ACCR 0.858 2.62 1.25 0.88 2.69 0.75 — — — — — — SE0477T13HT 477-T13 ACCR 0.860 2.62 1.25 0.88 2.69 0.75 — — — — — — SE0590TWT13HT 590-T13 ACCR/TW 0.860 2.62 1.25 0.88 2.69 0.75 — — — — — — SE0675TWT11HT 675-T11 ACCR/TW 0.902 2.62 1.25 0.88 2.69 0.75 — — — — — — SE0477T23HT 477-T23 ACCR 0.903 2.62 1.25 0.94 2.69 0.75 — — — — — — SE0665TWT16HT 665-T16 ACCR/TW 0.919 2.62 1.25 0.94 2.69 0.75 — — — — — — SE0557T16HT 557-T16 ACCR 0.941 2.62 1.25 0.94 2.69 0.75 — — — — — — SE0605T13HT 605-T13 ACCR 0.941 2.62 1.25 0.88 2.69 0.75 — — — — — — SE0636T10HT 636-T10 ACCR 0.962 2.62 1.25 0.88 2.62 1.00 — — — — — — SE0557T23HT 557-T23 ACCR 0.970 2.62 1.25 0.88 2.62 1.00 — — — — — — SE0636T16HT 636-T16 ACCR 0.990 2.62 1.25 0.94 2.69 0.75 — — — — — — SE0636T16HTSP1 636-T16 ACCR 0.990 2.62 1.25 0.94 2.69 0.75 — — — — — — SE0795TWT13HT 795-T13 ACCR/TW 0.992 3.25 1.25 1.12 2.62 1.00 — — — — — — SE0763TWT17HT 763-T17 ACCR/TW 0.996 3.25 1.25 1.12 2.62 1.00 — — — — — — SE0680T19HT 680-T19 ACCR 1.039 2.62 1.25 0.88 2.69 0.75 — — — — — — N K H L P M DIA. Compression Eye Dimension Detail Compression Clevis Dimension Detail Compression Dead End for 3M ACCR CATALOG NUMBER CONDUCTOR DIMENSIONS IN INCHES SIZE DIA C D E F G H K L M N P SE0715T13HT 715-T13 ACCR 1.040 2.62 1.25 0.94 2.69 0.75 — — — — — — SE0715T16HT 715-T16 ACCR 1.050 2.62 1.25 0.94 2.69 0.75 — — — — — — SE0780T10HT 780-T10 ACCR 1.067 2.62 1.25 0.88 2.69 0.75 — — — — — — SC0958TWT16HT 958-T16 ACCR/TW 1.099 — — — — — 3.69 1.56 2.88 1.25 1.44 2.88 SE0958TWT16HT 958-T16 ACCR/TW 1.099 3.25 1.25 1.12 2.69 1.00 — — — — — — SE0795T16HT 795-T16 ACCR 1.108 3.25 1.25 1.12 2.62 1.00 — — — — — — SE0795T1 3HT 795-T13 ACCR 1.112 3.25 1.25 1.12 2.62 1.00 — — — — — — SE1033TWT13HT 1033-T13 ACCR/TW 1.129 3.25 1.25 1.12 2.62 1.00 — — — — — — SE0558T73HT 558-T73 ACCR 1.132 4.41 1.91 1.73 3.57 1.25 — — — — — — SC0788T26HT 788-T26 ACCR 1.151 — — — — — 2.81 1.62 6.00 1.12 1.75 3.50 SE0951T10HT 951-T10 ACCR 1.178 2.62 1.25 0.94 2.69 0.75 — — — — — — SE0668T61HT 668-T61 ACCR 1.195 4.41 1.91 1.73 3.57 1.25 — — — — — — SE0954T13HT 954-T13 ACCR 1.200 3.25 1.25 1.12 2.69 1.00 — — — — — — SE1158TWT13HT 1158-T13 ACCR/TW 1.201 3.25 1.25 1.12 2.62 1.00 — — — — — — SE1059T09HT 1059-T9 ACCR 1.238 3.25 1.25 1.25 2.62 1.00 — — — — — — SE1033T13HT 1033-T13 ACCR 1.240 3.25 1.25 1.12 2.62 1.00 — — — — — — SE1113T13HT 1113-T13 ACCR 1.290 3.25 1.25 1.12 2.62 1.00 — — — — — — SE1272T11HT 1272-T11 ACCR 1.350 3.25 1.25 1.12 2.62 1.00 — — — — — — SC1272T13HT 1272-T13 ACCR 1.381 — — — — — 3.69 1.56 2.88 1.25 1.44 2.88 SE1272T09HT 1272-T9 ACCR 1.382 2.62 1.25 0.94 2.69 0.75 — — — — — — SE1085T37HT 1085-T37 ACCR 1.408 4.41 1.91 1.73 3.57 1.25 — — — — — — SC1351T13HT 1351-T13 ACCR 1.415 — — — — — 3.69 1.56 2.88 1.25 1.44 2.88 SC1622TWT13HT 1622-T13 ACCR/TW 1.417 — — — — — 3.69 1.56 2.88 1.25 1.44 2.88 SC1403T15HT 1403-T15 ACCR 1.464 — — — — — 3.69 1.56 2.88 1.25 1.44 2.88 SE1538T15HT 1538-T15 ACCR 1.530 4.50 1.75 1.38 3.62 1.38 — — — — — — SC1590T11HT 1590-T11 ACCR 1.532 — — — — — 3.69 1.56 2.88 1.25 1.44 2.88 SC1742T09HT 1742-T09 ACCR 1.588 — — — — — 3.69 1.56 2.88 1.25 1.44 2.88 15° Terminal (T15) for 3M ™ ACCR CATALOG NUMBER CONDUCTOR DIMENSION AFCHT COMPOUND (LBS.) DIE SIZE WEIGHT (LBS.) SIZE A B IN MM IN MM T150155TWT25HT 155-T25 ACCR/TW 16.19 411.23 0.41 10.41 0.12 10024AH-ACCR 2.5 T150131T58HT 131-T58 ACCR 16.19 411.23 0.41 10.41 0.10 10024AH-ACCR 2.5 T150195T20HT 195-T20 ACCR 16.19 411.23 0.41 10.41 0.30 10024AH-ACCR 2.2 T150245TWT20HT 245-T20 ACCR/TW 16.19 411.23 0.41 10.41 0.30 10024AH-ACCR 7.2 T150236T16HT 236-T16 ACCR 16.19 411.23 0.41 10.41 0.30 10024AH-ACCR 2.2 T150267T23HT 267-T23 ACCR 16.19 411.23 0.41 10.41 0.10 10024AH-ACCR 2.5 T150270T35HT 270-T35 ACCR 17.00 431.80 0.56 14.22 0.30 10030AH-ACCR 3.2 T150183T114HT 183-T114 ACCR 16.19 411.23 0.41 10.41 0.30 10024AH-ACCR 2.0 T150373T13HT 373-T13 ACCR 16.19 411.23 0.41 10.41 0.10 10027AH-ACCR 2.5 T150382T16HT 382-T16 ACCR 17.00 431.80 0.50 12.70 0.30 10027AH-ACCR 3.1 T150427T13HT 427-T13 ACCR 17.00 431.80 0.56 14.22 0.30 C9813-10029AH-ACCR 3.2 T150397T23HT 397-T23 ACCR 17.00 431.80 0.56 14.22 0.30 10030AH-ACCR 3.2 T150477T16HT 477-T16 ACCR 17.00 431.80 0.56 14.22 0.30 10030AH-ACCR 3.2 T150477T13HT 477-T13 ACCR 17.00 431.80 0.56 14.22 0.30 10030AH-ACCR 3.2 T150590TWT13HT 590-T13 ACCR/TW 17.00 431.80 0.56 14.22 0.30 10030AH-ACCR 3.2 T150675TWT11HT 675-T11 ACCR/TW 18.19 462.03 0.62 15.75 0.30 10034AH-ACCR 4.5 T150477T23HT 477-T23 ACCR 18.19 462.03 0.62 15.75 0.25 10036AH-ACCR 4.2 T150665TWT16HT 665-T16 ACCR/TW 18.19 462.03 0.62 15.75 0.30 10034AH-ACCR 4.2 T150557T16HT 557-T16 ACCR 18.19 462.03 0.62 15.75 0.30 10034AH-ACCR 4.2 T150605T13HT 605-T13 ACCR 18.19 462.03 0.62 15.75 0.30 10034AH-ACCR 4.2 T150636T10HT 636-T10 ACCR 18.19 462.03 0.62 15.75 0.30 10036AH-ACCR 4.2 T150557T23HT 557-T23 ACCR 18.19 462.03 0.62 15.75 0.30 10036AH-ACCR 4.2 T150636T16HT 636-T16 ACCR 18.19 462.03 0.62 15.75 0.30 10034AH-ACCR 4.2 T150795TWT13HT 795-T13 ACCR/TW 21.50 546.10 0.69 17.53 0.54 10040AH-ACCR 8.1 T150763TWT17HT 763-T17 ACCR/TW 21.50 546.10 0.69 17.53 0.54 10040AH-ACCR 8.2 T150680T19HT 680-T19 ACCR 19.00 482.60 0.62 15.75 0.10 10036AH-ACCR 5.3 T150715T13HT 715-T13 ACCR 18.19 462.03 0.62 15.75 0.30 10034AH-ACCR 4.2 T150715T16HT 715-T16 ACCR 18.19 462.03 0.62 15.75 0.30 10034AH-ACCR 4.2 T PRESS TO END 477M 26/7 ACCR 10030AH S A R T ACA TF0477T16HT 1.75 AB ±.06 1.75 AA FLAT SURFACE AD .56 DIA. HOLES MUST BE FREE OF BURRS B DIA. 4 3 THESE SURFACES SHALL BE FLAT AND PARALLEL WITHIN .015 F 2 (GRIP THK.) L C SYM. A B 15° Catalog Number Configuration for Terminals, Joints, Jumpers, Repair Sleeves & Taps JT = Joint JU = Jumper RS = Repair Sleeve T00= Straight terminal T15 = 15 degree terminal T90 = 90 degree terminal TTOC = Open Run Tee Connector TTOP = Open Run Tee Tap 3M Wire Code Designation HT = High Temperature Accessory T15 HT 0336T16 ORDERING EXAMPLE: T150336T16HT 15° Terminal for conductor code "0336T16", high temperature. 15° Terminal (T15) for 3M ™ ACCR CATALOG NUMBER CONDUCTOR DIMENSION AFCHT COMPOUND (LBS.) DIE SIZE WEIGHT (LBS.) SIZE A B IN MM IN MM T150681TWT43HT 681-T43 ACCR/TW 22.50 571.50 0.72 18.29 0.62 10044AH-ACCR 8.6 T150780T10HT 780-T10 ACCR 18.19 462.03 0.62 15.75 0.30 10034AH-ACCR 4.2 T150958TWT16HT 958-T16 ACCR/TW 23.00 584.20 0.72 18.29 0.61 10042AH-ACCR 8.6 T150795T16HT 795-T16 ACCR 21.50 546.10 0.69 17.53 0.54 10040AH-ACCR 8.1 T150795T13HT 795-T13 ACCR 21.50 546.10 0.69 17.53 0.54 10040AH-ACCR 8.1 T151033TWT13HT 1033-T13 ACCR/TW 22.50 571.50 0.72 18.29 0.62 10044AH-ACCR 8.6 T150558T73HT 558-T73 ACCR 21.50 546.10 0.69 17.53 0.54 10040AH-ACCR 8.1 T150788T26HT 788-T26 ACCR 22.38 568.45 0.72 18.29 0.61 10042AH-ACCR 8.6 T150951T10HT 951-T10 ACCR 22.38 568.45 0.72 18.29 0.61 10042AH-ACCR 8.6 T150668T61HT 668-T61 ACCR 25.00 635.00 0.81 20.57 0.71 10048AH-ACCR 10.5 T150954T13HT 954-T13 ACCR 22.38 568.45 0.72 18.29 0.61 10042AH-ACCR 8.6 T151158TWT13HT 1158-T13 ACCR/TW 22.50 571.50 0.72 18.29 0.62 10044AH-ACCR 8.6 T151059T09HT 1059-T9 ACCR 22.50 571.50 0.72 18.29 0.62 10044AH-ACCR 8.6 T151033T13HT 1033-T13 ACCR 22.50 571.50 0.72 18.29 0.62 10044AH-ACCR 8.6 T150774T53HT 774-T53 ACCR - - - - 0.76 10050AH-ACCR - T151113T13HT 1113-T13 ACCR 22.50 571.50 0.72 18.29 0.62 10044AH-ACCR 8.6 T151272T13HT 1272-Tl3 ACCR 25.00 635.00 0.81 20.57 0.71 10048AH-ACCR 10.5 T151272T11HT 1272-T11 ACCR 25.00 635.00 0.81 20.57 0.71 10048AH-ACCR 10.5 T151272T09HT 1272-T9 ACCR 25.00 635.00 0.81 20.57 0.71 10048AH-ACCR 10.5 T151085T37HT 1085-T37 ACCR 25.00 635.00 0.81 20.57 0.66 10048AH-ACCR 10.5 T151622TWT13HT 1622-T13 ACCR/TW 25.00 635.00 0.81 20.57 0.66 C9813-10049AH-ACCR 11.5 T151403T15HT 1403-T15 ACCR 25.00 635.00 0.81 20.57 0.66 10050AH-ACCR 11.5 T151351T13HT 1351-T13 ACCR 25.00 635.00 0.81 20.57 0.50 10048AH-ACCR 10.5 T151590T11HT 1590-T11 ACCR 25.00 635.00 0.81 20.57 0.50 10048AH-ACCR 10.5 T151590T13HT 1590-T13 ACCR 25.00 635.00 0.81 20.57 0.50 10048AH-ACCR 10.5 T151742T09HT 1742-T9 ACCR 25.00 635.00 0.81 20.57 0.54 10050AH-ACCR 11.5 Compression Joint for 3M ACCR CATALOG NUMBER CONDUCTOR DIMENSION DIE SIZE AFCHT COMPOUND (LBS.) WEIGHT (LBS.) SIZE DIA A ALUM. STEEL IN MM JT0155TWT25HT 155-T25 ACCR/TW 0.471 34.24 869.70 10024AH-ACCR 10014SH-ACCR 1.0 5.3 JT0131T58HT 131-T58 ACCR 0.523 35.74 907.80 10024AH-ACCR 10014SH-ACCR 0.1 5.2 JT0245TWT20HT 245-T20 ACCR/TW 0.576 37.24 945.90 10024AH-ACCR 10014SH-ACCR 1.0 5.4 JT0207T23HT 207-T23 ACCR 0.582 35.74 907.80 10024AH-ACCR 10014SH-ACCR 0.1 5.2 JT0236T16HT 236-T16 ACCR 0.603 40.50 1028.70 10036AH-ACCR 10014SH-ACCR 1.2 14.0 JT0237T23HT 237-T23 ACCR 0.622 34.24 869.70 10024AH-ACCR 10012SH-ACCR 1.0 5.2 JT0162T81HT 162-T81 ACCR 0.623 38.00 965.20 10030AH-ACCR 10016SH-ACCR 1.0 8.5 JT0267T16HT 267-T16 ACCR 0.630 34.24 869.70 10024AH-ACCR 10014SH-ACCR 1.0 5.2 JT0267T23HT 267-T23 ACCR 0.660 34.24 869.70 10024AH-ACCR 10014SH-ACCR 1.0 5.2 JT0300T16HT 300-T16 ACCR 0.680 34.24 869.70 10024AH-ACCR 10014SH-ACCR 1.0 5.2 JT0270T35HT 270-T35 ACCR 0.693 41.00 1041.40 10030AH-ACCR 10014SH-ACCR 1.0 8.9 JT0183T114HT 183-T114 ACCR 0.719 39.75 1009.65 10034AH-ACCR 10020SH-ACCR 1.0 12.4 JT0336T16HT 336-T16 ACCR 0.724 34.24 869.70 10024AH-ACCR 10012SH-ACCR 1.0 5.2 JT0373T13HT 373-T13 ACCR 0.748 39.26 997.20 10027 AH-ACCR 10014SH-ACCR 0.1 6.7 JT0382T16HT 382-T16 ACCR 0.768 39.26 997.20 10027 AH-ACCR 10014SH-ACCR 0.1 6.7 JT0427T13HT 427-T13 ACCR 0.800 38.00 965.20 C9813-10029AH-ACCR 10014SH-ACCR 1.0 8.5 JT0397T23HT 397-T23 ACCR 0.809 38.00 965.20 10030AH-ACCR 10016SH-ACCR 1.0 8.5 JT0477T16HT 477-T16 ACCR 0.858 38.00 965.20 10030AH-ACCR 10014SH-ACCR 1.0 8.5 JT0605T13HT 605-T13 ACCR 0.858 39.75 1009.65 10034AH-ACCR 10014SH-ACCR 1.0 11.1 JT0477T13HT 477-T13 ACCR 0.860 38.00 965.20 10030AH-ACCR 10014SH-ACCR 1.0 8.5 JT0590TWT13HT 590-T13 ACCR/TW 0.860 38.00 965.20 10030AH-ACCR 10014SH-ACCR 1.0 8.5 JT0675TWT11HT 675-T11 ACCR 0.902 39.75 1009.65 10034AH-ACCR 10014SH-ACCR 1.0 11.1 JT0477T23HT 477-T23 ACCR 0.903 44.00 1117.60 10036AH-ACCR 10016SH-ACCR 1.2 15.6 JT0665TWT16HT 665-T16 ACCR/TW 0.919 40.50 1028.70 10034AH-ACCR 10016SH-ACCR 1.0 11.1 JT0557T16HT 557-T16 ACCR 0.941 39.75 1009.65 10034AH-ACCR 10016SH-ACCR 1.0 11.1 JT0636T10HT 636-T10 ACCR 0.962 40.50 1028.70 10036AH-ACCR 10014SH-ACCR 1.2 14.0 JT0557T23HT 557-T23 ACCR 0.970 40.50 1028.70 10036AH-ACCR 10018SH-ACCR 1.2 14.0 JT0636T16HT 636-T16 ACCR 0.990 39.75 1009.65 10034AH-ACCR 10016SH-ACCR 1.0 11.1 JT0795TWT13HT 795-T13 ACCR/TW 0.992 42.00 1066.80 10040AH-ACCR 10016SH-ACCR 1.5 16.0 JT0763TWT17HT 763-T17 ACCR/TW 0.996 42.00 1066.80 10040AH-ACCR 10018SH-ACCR 1.5 16.2 JT0680T19HT 680-T19 ACCR 1.039 40.50 1028.70 10036AH-ACCR 10016SH-ACCR 1.2 14.0 JT0715T13HT 715-T13 ACCR 1.040 39.75 1009.65 10034AH-ACCR 10016SH-ACCR 1.0 11.1 JT0715T16HT 715-T16 ACCR 1.050 39.75 1009.65 10034AH-ACCR 10016SH-ACCR 1.0 11.1 JT0780T10HT 780-T10 ACCR 1.067 39.75 1009.65 10034AH-ACCR 10014SH-ACCR 1.0 11.1 JT0958TWT16HT 958-T16 ACCR/TW 1.099 50.50 1282.70 10042AH-ACCR 10020SH-ACCR 1.5 27.2 JT0795T16HT 795-T16 ACCR 1.108 42.00 1066.80 10040AH-ACCR 10018SH-ACCR 1.5 16.0 JT0795T13HT 795-T13 ACCR 1.112 42.00 1066.80 10040AH-ACCR 10016SH-ACCR 1.5 16.0 JT1033TWT13HT 1033-T13 ACCR/TW 1.129 47.00 1193.80 10044AH-ACCR 10018SH-ACCR 1.5 22.0 JT0788T26HT 788-T26 ACCR 1.151 50.00 1270.00 10042AH-ACCR 10020SH-ACCR 1.5 21.3 JT0951T10HT 951-T10 ACCR 1.151 50.00 1270.00 10042AH-ACCR 10016SH-ACCR 1.5 27.0 JT0668T61HT 668-T61 ACCR 1.195 65.76 1670.30 10048AH-ACCR 10024SH-ACCR 1.7 38.9 JT0954T13HT 954-T13 ACCR 1.200 44.75 1136.65 10042AH-ACCR 10018SH-ACCR 1.2 19.1 S T A R T PRESS TO END APPROX. AFTER COMPRESSION (EXTRUSION OF INSERT SLEEVE) APPROX. C SYM. L PRESS TO END T R S A T D E A (approximate before compression) Compression Joint for 3M ACCR CATALOG NUMBER CONDUCTOR DIMENSION DIE SIZE AFCHT COMPOUND (LBS.) WEIGHT (LBS.) SIZE DIA A ALUM. STEEL IN MM JT1158TWT13HT 1158-T13 ACCR/TW 1.201 47.00 1193.80 10044AH-ACCR 10018SH-ACCR 1.5 22.0 JT1059T09HT 1059-T9 ACCR 1.238 47.00 1193.80 10044AH-ACCR 10016SH-ACCR 1.5 22.0 JT1033T13HT 1033-T13 ACCR 1.240 47.00 1193.80 10044AH-ACCR 10018SH-ACCR 1.5 22.0 JT0774T53HT 774-T53 ACCR 1.254 - - 10050AH-ACCR 10024SH-ACCR 6.0 - JT1113T13HT 1113-T13 ACCR 1.290 47.00 1193.80 10044AH-ACCR 10018SH-ACCR 1.5 22.0 JT1272T11HT 1272-T11 ACCR 1.350 48.26 1225.80 10048AH-ACCR 10018SH-ACCR 2.0 25.4 JT1272T13HT 1272-T13 ACCR 1.381 48.26 1225.80 10048AH-ACCR 10020SH-ACCR 2.0 26.4 JT1272T09HT 1272-T9 ACCR 1.382 46.76 1187.70 10048AH-ACCR 10016SH-ACCR 1.5 26.0 JT1085T37HT 1085-T37 ACCR 1.408 65.76 1670.30 10048AH-ACCR 10024SH-ACCR 1.7 38.9 JT1351T13HT 1351-T13 ACCR 1.415 48.26 1225.80 10048AH-ACCR 10020SH-ACCR 1.2 25.8 JT1622TWT13HT 1622-T13 ACCR/TW 1.417 50.50 1282.70 C9813-10049AH-ACCR 10020SH-ACCR 1.4 29.5 JT1403T15HT 1403-T15 ACCR 1.464 50.50 1282.70 10050AH-ACCR 10020SH-ACCR 1.4 29.5 JT1538T15HT 1538-T15 ACCR 1.530 55.00 1397.00 10050AH-ACCR 10022SH-ACCR 2.0 32.8 JT1590T11HT 1590-T11 ACCR 1.532 48.26 1225.80 10048AH-ACCR 10020SH-ACCR 1.2 25.8 JT1742T09HT 1742-T9 ACCR 1.588 50.50 1282.70 10050AH-ACCR 10020SH-ACCR 1.5 28.3 Features Wide Vibration and Voltage Coverage AFL's Stockbridge Damper has two natural frequency modes, commonly known as 'flying' and 'wiggling'. AFL uses a specially designed 19 strand messenger wire allowing the damper to dissipate vibration, or 'wake up', at lower energy inputs. The two frequency modes combined with the 19 strand messenger wire give the Stockbridge Damper the widest range of vibration coverage in the industry. Damper assemblies with catalog weights of 1706 and larger can be used at 345 kV and above. Pressed Clamp and Weights The Stockbridge Damper clamp and weights are pressed onto the messenger wire, as opposed to being cast or welded. The pressing operation does not alter the physical or mechanical characteristics of the messenger wire. Casting or welding anneals the messenger, compromising its performance. No Special Tools Needed with Breakaway Bolt Option With the breakaway bolt, no special tools or torque wrench is needed. Simply tighten the bolt until the head shears off. This means proper torque has been achieved. Vibrec ™ Damper Recommendation Program The Vibrec damper recommendation program assists in damper requirements for transmission and distribution lines. High Temperature Applications Special clamp design eliminates the need for installation over rods. Damper can be installed directly on the conductor. For more information visit www.vibrec.com or contact the AFL Technical Support Team at 1.800.866.7385. What is Aeolian Vibration? Aeolian vibration is a high frequency motion that occurs when a smooth, steady crosswind blows on aerial cables. This laminar wind creates vortices, which are detached at regular intervals on the leeward side, alternating from top and bottom of the cable. The detachments create vertical forces causing the cable to vibrate standing waves generally in high harmonic modes. The primary factors affecting aeolian vibration are span length, tension and impedance. The amount of energy imparted to a cable varies directly with the span length. With increasing tension, the tendency of a cable to vibrate rises rapidly as its self-dampening ability reduces. Impedance is determined by the mechanical and material properties of the cable. The first aeolian vibration fatigue failures of stranded conductor were reported in 1917. George Stockbridge of Southern California Edison first developed dampers in 1928. During this same time frame, AFL erected an outdoor test span and indoor laboratory for the study of vibration. These expanded facilities, along with more than 70 years of research and experience, have assisted AFL in understanding the theory of vibration and its control. Aeolian vibration still occurs and causes damage to conductors, hardware and towers. AFL Stockbridge Dampers dissipate this damaging force of nature. Designed to eliminate the damage caused by aeolian vibration, AFL's Stockbridge Damper is the most efficient way to extend the life of a transmission line. Transmission Conductor Vibration Dampers Stockbridge Type — 1700 Series HiTemp AFL Filler Compound (AFCHT) is the recommended filler for compression fittings due to its ability to improve the mechanical holding strength and conductivity of the connection. The compound has been designed to withstand the increased temperatures of 3M ACCR conductor. Kept in a dry place, AFCHT has an infinite shelf life. Application Filler Compound for compression accessories installed on conductors operating at temperatures up to 250ºC (482ºF). Compression accessories includes: dead ends, joints, terminals and jumper connectors. Features Wide Temperature Tolerance AFCHT has a wide temperature tolerance, is workable at low temperatures and does not drip at high temperatures. The melting point is above 250ºC (482ºF). Improves Holding Strength and Conductivity AFCHT contains hard metallic particles, otherwise known as "grit." During compression, the compound grit is embedded between the conductor and the accessory, creating an irregular surface. This irregular surface has two features: (1) increases the holding strength when tension is applied and (2) improves conductivity by forming a bare metal to metal connection. Moisture Resistant As the accessory is compressed, AFCHT is forced between the conductor strands, sealing out the harmful effects of water. Fits Standard Caulking Gun For easy filling of compression accessories, AFCHT is available in a tube that fits a standard caulking gun. HiTemp ® AFL Filler Compound (AFCHT ™ ) Ordering Information CATALOG NUMBER PACKAGING AFCHT10T Carton of 10, 1 lb. (451 g) Tubes - Fits Standard Caulking Gun AFCHT1GAL 1 Gallon Pail, 11 lbs. (5 kg) AFCHT5GAL 5 Gallon Pail, 55 lbs. (25 kg) 30GHR Gas Hydraulic Pump The 30GHR is a gas-powered pump that produces 10,000 PSI of hydraulic pressure. With an unloading pressure at 1,000 PSI, the two-stage pumping system allows for rapid ram advance. The 30GHR comes with a remote control and 10' cord and is designed for continuous duty. Features • 10,000 PSI high-pressure pump powered by a 5.5 HP Honda engine • Remote control with 10' cord • Designed to operate single-acting and double-acting tools • High-pressure relief valve • Sight gauge to monitor hydraulic oil level • Pressure-matched quick coupler supplied • Protective carrying cage Ordering Information CATALOG NUMBER DESCRIPTION 30GHR 10,000 PSI Gas Powered Hydraulic Pump with Remote Control Technical Data PARAMETER VALUE Gas Powered Motor 5.5 HP Honda Engine Control Remote Control with 10 foot cord Oil Delivery per minute 430 cu in @ 400 PSI 125 cu in @ 10,000 PSI Oil Reservoir 2 gallons (7.40 liters) Overall Length 21.75 in (55.25 cm) Overall Width 19.75 in (50.17 cm) Overall Height 24.50 in (62.23 cm) Pump Weight with oil 135 lbs (61.36 kg) WARNING: Do not operate any compression tool without dies. WARNING: Do not operate any compression tool without dies. 100A Hydraulic Press The 100A Single or Double Acting Press is designed for the installation of compression fittings. The 100A develops 100 tons of force at 10,000 PSI. A special piston facilitates operation in single or double acting mode. Redesigned for portability, the 100A Hydraulic Press now weighs 95 pounds. Features • 100 tons of force • Larger capacity for transmission and distribution applications • Easy die installation • Carrying handles for portability • Capacity for all "U" or shell-type dies • Metal carrying case • Pressure matched quick coupler supplied • Double acting conversion kit included • Suspension eye supplied Ordering Information CATALOG NUMBER DESCRIPTION 100A 100 Ton Single/Double Acting Press with Metal Case Technical Data PARAMETER VALUE Crimping Force 100 US Tons (90.8 Metric Tons) Operating Pressure 10,000 PSI - 70,000 kPa (700 bar) Crimp Capacity - in. (cm) Up to 3.25 (8.26) conductor dia. Dimensions - in. (cm) 8.25 (20.96) Overall Height 15.00 in (38.10 cm) Tool Weight 95.0 lbs (43.2 kg) WARNING: Hoses connecting hydraulic equipment should not extend straight upward more than 25 feet (7.6 meters). Hydraulic Hoses The 1/4" (0.635 cm) non-conductive, orange hose is made of an insulated, synthetic material, allowing a high flow rate for faster ram movement. Hoses are available with or without couplers for operating pressures of 10,000 PSI with a 4 to 1 burst ratio and are pre-filled with oil and pressure tested. The hoses are 3/8" NPT male thread on both ends and quick disconnects are 3/8" NPT female. Ordering Information CATALOG NUMBER DESCRIPTION 6HOSEM/M 6 Foot Hose with Male/Male Couplers (1.83 Meters) 10HOSEM/M 10 Foot Hose with Male/Male Couplers (3.04 Meters) 15HOSEM/M 15 Foot Hose with Male/Male Couplers (4.37 Meters) 25HOSEM/M 25 Foot Hose with Male/Male Couplers (7.62 Meters) 6HOSEM/F 6 Foot Hose with Male/Female Couplers (1.83 Meters) 10HOSEM/F 10 Foot Hose with Male/Female Couplers (3.04 Meters) 15HOSEM/F 15 Foot Hose with Male/Female Couplers (4.37 Meters) 25HOSEM/F 25 Foot Hose with Male/Female Couplers (7.62 Meters) www.AFLglobal.com © 2011 AFL, all rights reserved. BRO-03002 11.19.19 www.AFLglobal.com