Swage Grounding Elbows connect cables or rods at a 90-degree angle.
eecceab84d074950b1dd0abaf536634c
15 AFLglobal com 1 (800) 866-7385 © 2017, AFL, all rights reserved PP-3-00724, Revision 1, 6 5 2024 Specifications are subject to change without notice 15 SWAGE360 ® Grounding Material Copper Alloy Notes • For tin plating, add "-SN" to end of catalog number EX: SWGE2450-SN • For detailed conductor range information, please see page 33 (L11557) TYPE SWGE Swage 90-Degree Elbow A swage type elbow that connects two cable or rod runs at a 90-degree angle to enable grounding on the same run. AFL NO. CABLE RANGE DIMENSIONS IN inches DIE SIZE TAP 1 TAP 2 A B SWGE206-2025 #2 250 2 80 2 17 45TD20 SWGE2013 1/0 2/0 1/0 2/0 2 80 2 17 45TD20 SWGE2013-2021 4/0 2 80 2 17 45TD20 SWGE2013-2025 250 2 80 2 17 45TD20 SWGE2017 3/0 3/0 2 80 2 17 45TD20 SWGE2017-2021 4/0 2 80 2 17 45TD20 SWGE2017-2025 250 2 80 2 17 45TD20 SWGE2021 4/0 4/0 2 80 2 17 45TD20 SWGE2021-2017 3/0 2 80 2 17 45TD20 SWGE2021-2025 250 2 80 2 17 45TD20 SWGE2021-2035 5/8"ROD 2 80 2 17 45TD20 SWGE2021-2045 3/4"ROD 2 80 2 17 45TD20 SWGE2025 250 250 2 80 2 17 45TD20 SWGE2025-2035 5/8"ROD 2 80 2 17 45TD20 SWGE2025-2045 3/4"ROD 2 80 2 17 45TD20 SWGE2421 4/0 4/0 3 05 2 17 45TD20 SWGE2421-2445 3/4"ROD 3 05 2 30 45TD24 SWGE2425-2417 250 3/0 3 05 2 30 45TD24 SWGE2425-2445 3/4"ROD 3 05 2 30 45TD24 SWGE2450-2445 500 3/4"ROD 3 05 2 30 45TD24 SWGE2450 500 3 05 2 30 45TD24 A TYP 90 ° TAP 2 TAP 1 Ordering Information Die Code comes from maximum connector OD from Table at right • EX: Tin plated elbow for 250MCM Cu to 500MCM Cu is SWGE2425-2450-SN • EX: Elbow for 250MCM Cu to 500MCM is SWGE2425-2450 XX SWGE Tap 1 Cable Code YYY XX Die Code ZZZ Part Family (Leave blank if same as Run) Die Code Tap 2 Cable Code B TYP
16 AFLglobal com 1 (800) 890-8878 © 2017, AFL, all rights reserved PP-3-00720, Revision 3, 9 3 2024 Specifications are subject to change without notice 16 SWAGE360 ® Grounding TYPE SWGES Swage Split Elbow A swage type split elbow connects a cable or rod at a 90-degree angle to the main run. This part features a sliding channel for ease of installation. Material Copper Alloy Notes • For tin plating, add "-SN" to end of catalog number EX: SWGES2450-SN • For detailed conductor range information, please see page 33 (L11557) A TYP ∅ B A TYP 90 ° TAP RUN continued
17 AFLglobal com 1 (800) 890-8878 © 2017, AFL, all rights reserved PP-3-00720, Revision 3, 9 3 2024 Specifications are subject to change without notice 17 SWAGE360 ® Grounding AFL NO. CABLE RANGE DIMENSIONS IN inches DIE SIZE RUN TAP A B SWGES202-2021 #6 4/0 2 17 1 25 45TD20 SWGES2013-206 1/0 2/0 #2 2 17 1 25 45TD20 SWGES2013 1/0 2/0 2 17 1 25 45TD20 SWGES2013-2017 3/0 2 17 1 25 45TD20 SWGES2013-2025 250 2 17 1 25 45TD20 SWGES2013-2035 5/8"ROD 2 17 1 25 45TD20 SWGES2013-2045 3/4"ROD 2 17 1 25 45TD20 SWGES2017 3/0 3/0 2 17 1 25 45TD20 SWGES2017-2021 4/0 2 17 1 25 45TD20 SWGES2017-2025 250 2 17 1 25 45TD20 SWGES2017-2035 350 2 17 1 25 45TD20 SWGES2021-2013 4/0 1/0 2/0 2 17 1 25 45TD20 SWGES2021-2017 3/0 2 17 1 25 45TD20 SWGES2021 4/0 2 17 1 25 45TD20 SWGES2021-2025 250 2 17 1 25 45TD20 SWGES2021-2035 350 2 17 1 25 45TD20 SWGES2021-2045 3/4"ROD 2 17 1 25 45TD20 SWGES2021-2075C 3/4" Cu Rod 2 17 1 25 45TD20 SWGES2025-2021 250 4/0 2 17 1 25 45TD20 SWGES2025 250 2 17 1 25 45TD20 SWGES2025-2045 3/4"ROD 2 17 1 25 45TD20 SWGES2025-2075C 3/4" Cu Rod 2 17 1 25 45TD20 SWGES2421-2445 4/0 3/4" ROD 2 30 1 50 45TD24 SWGES2421-2450 4/0 500 2 30 1 50 45TD24 SWGES2425-2435 250 350 2 30 1 50 45TD24 SWGES2430-2421 300 4/0 2 30 1 50 45TD24 SWGES2430 300 2 30 1 50 45TD24 SWGES2435-2421 350 4/0 2 30 1 50 45TD24 SWGES2435 350 2 30 1 50 45TD24 SWGES2435-2425 250 2 30 1 50 45TD24 SWGES2435-2440 400 2 30 1 50 45TD24 SWGES2450-2421 500 4/0 2 30 1 50 45TD24 SWGES2450-2425 250 2 30 1 50 45TD24 SWGES2450 500 2 30 1 50 45TD24 Ordering Information Die Code comes from maximum connector OD from Table at right • EX: Tin plated split elbow for 250MCM Cu to 500MCM Cu is SWGES2425-2450-SN • EX: Split elbow for 250MCM Cu to 500MCM is SWGES2425-2450 XX SWGES Run Cable Code YYY XX Die Code ZZZ Part Family (Leave blank if same as Run) Die Code Tap Cable Code TYPE SWGES Swage Split Elbow
18 AFLglobal com 1 (800) 890-8878 © 2017, AFL, all rights reserved PP-3-00725, Revision 1, 6 5 2024 Specifications are subject to change without notice 18 SWAGE360 ® Grounding TYPE SWGEH Swage Alternate Elbow A swage type alternate elbow connector is used to connect a cable/rod to another cable or rod. A TYP B TYP 90 ° TAP RUN Material Copper Alloy Notes • For tin plating, add "-SN" to end of catalog number EX: SWGEH2450-SN • For detailed conductor range information, please see page 33 (L11557) AFL NO. CABLE RANGE DIMENSIONS IN inches DIE SIZE RUN TAP A B SWGEH2013-2035 1/0 2/0 5/8" ROD 2 80 2 17 45TD20 SWGEH2013 1/0 2/0 2 80 2 17 45TD20 SWGEH2017 3/0 3/0 2 80 2 17 45TD20 SWGEH2017-2035 5/8" ROD 2 80 2 17 45TD20 SWGEH2021-2013 4/0 1/0 2/0 2 80 2 17 45TD20 SWGEH2021 4/0 2 80 2 17 45TD20 SWGEH2021-2045 3/4" ROD 2 80 2 17 45TD20 SWGEH2025-206 250 #2 2 80 2 17 45TD20 SWGEH2025 250 2 80 2 17 45TD20 SWGEH2025-2035 5/8" ROD 2 80 2 17 45TD20 SWGEH2025-2045 3/4" ROD 2 80 2 17 45TD20 SWGEH2035-2021 5/8" ROD 4/0 2 80 2 17 45TD20 SWGEH2035-2025 250 2 80 2 17 45TD20 SWGEH2421 4/0 4/0 3 05 2 30 45TD24 SWGEH2421-2435 5/8" ROD 3 05 2 30 45TD24 SWGEH2450-2425 500 250 3 05 2 30 45TD24 SWGEH2450-2445 3/4" ROD 3 05 2 30 45TD24 SWGEH2450 500 3 05 2 30 45TD24 Ordering Information Die Code comes from maximum connector OD from Table at right • EX: Tin plated alternate elbow for 500MCM Cu to 250MCM Cu is SWGEH2450-2425-SN • EX: Alternate elbow for 500MCM Cu to 250MCM is SWGEH2450-2425 XX SWGEH Run Cable Code YYY XX Die Code ZZZ Part Family (Leave blank if same as Run) Die Code Tap Cable Code
Features:
- Copper Alloy
- Swage compression fitting for grounding applications
- Installs faster and more efficiently with lower installation costs over the welding process
Applications:
- Substation
- Copper Alloy Grounding Accessories
The Swage type SWGE elbow connects two cable or rod runs at a 90-degree angle to enable grounding on the same run. The Swage type SWGES split elbow connects a cable or rod at a 90-degree angle to the main run. This part features a sliding channel for ease of installation. The Swage type SWGEH alternate elbow connector is used to connect a cable/rod to another cable or rod.
230 kV Aluminum Compression Couplers,230 kV Aluminum Compression Tee Connectors,230 kV Aluminum Compression Tee Terminal Connectors,230 kV Aluminum Compression Terminal Connectors,230 kV Aluminum Welded Bus Pipe Couplers,230 kV Aluminum Welded Bus Pipe Elbows,230 kV Aluminum Welded Bus Pipe Supports,230 kV Aluminum Welded Bus Pipe Tee and Vee Connectors,230 kV Aluminum Welded Bus Pipe Terminal Connectors,230 kV Aluminum Welded Bus Pipe to Cable Couplers,230 kV Aluminum Welded Bus Pipe to Cable Tee,230 kV Aluminum Welded Cable Terminal,230 kV Aluminum Welded End Plugs,230 kV Aluminum Welded Grounding Rod,230 kV Aluminum Welded Pipe Taps
2547
Swage Grounding Elbows
Close
Swage Grounding Elbows
Features:
- Copper Alloy
- Swage compression fitting for grounding applications
- Installs faster and more efficiently with lower installation costs over the welding process
Applications:
- Substation
- Copper Alloy Grounding Accessories
PRODUCT DESCRIPTION
The Swage type SWGE elbow connects two cable or rod runs at a 90-degree angle to enable grounding on the same run. The Swage type SWGES split elbow connects a cable or rod at a 90-degree angle to the main run. This part features a sliding channel for ease of installation. The Swage type SWGEH alternate elbow connector is used to connect a cable/rod to another cable or rod.