AFL eABF Air-Blown Fiber Optic Cable mit sechs bis zu 96 Fasern in einem kundenspezifischen Kabelpaket, das das Jetten über große Entfernungen in Mikrokanäle mit einem Innendurchmesser von nur 6 mm ermöglicht.
87052efdebd1496e820da04258d0f179
1 FIBER OPTIC CABLE eABF ® Fiber Optic Cable © 2013, AFL, all rights reserved. PP-1-00030, Revision 17, 11.15.2022 Specifications are subject to change without notice. AFLglobal.com | 800.235.3423 continued Estimated Installation Distances OD/ID DISTANCE (FT) V-20 Install Distance—eABF 3.6 mm (6-24 Fibers) 8.5 x 6 3,000 V-20 Install Distance—eABF 3.8 mm (48 Fibers) 8.5 x 6 2,500 V-20 Install Distance—eABF 4.5 mm (72-96 Fibers) 8.5 x 6 1,500 Enterprise Blown Fiber (eABF ® ) Cable eABF cables are designed by AFL to offer the most rugged and reliable enterprise-based blown fiber solution in the market today. The patent pending cable design combines a light-weight, high-drag jacketing system that allows the cable to be blown long distances. The cable series also features additional attributes that set this product above and beyond traditional blown fiber cables. These enhanced features include mechanical strengthening that permits the cable to comply with industry-standard premise interconnect specifications. In addition, the eABF cable series feature flame-resistance characteristics which result in stand-alone riser and plenum rated options suitable for routing outside of the micro-duct system. Because of these mechanical, environmental and optical qualifications, eABF cables can also be installed in third-party, flame-rated duct and pathway systems. Applications • Designed for Data Center Interconnect • Horizontal Distribution • Backbone Distribution • Low-cost fiber upgrade migration strategies Features • Contains water-blocking components for additional fiber protection from accidental water exposure • Can be installed in eABF duct or third-party rated duct systems • Complete range of single-mode and multimode fibers to support 10G, 40G and 100G Ethernet architectures • Aramid-strengthened cable core for robust tensile load bearing capabilities • OD compatible with 6 mm ID Micro-ducts for higher density fiber pathway solutions • 96-Fiber count fits into 8.5 mm x 6 mm Micro-duct for up to 2,304 fibers per 24-way Dura-Line FuturePath Duct Specifications—eABF Optical Fiber FIBER TYPE IS0 DESIGNATION MAXIMUM ATTENUATION ( dB/km ) OVERFILL LAUNCH MIN. BANDWIDTH ( MHz-km ) EMBC ( MHz-km ) GIGABIT ETHERNET MAX. LINK DISTANCE ( Meters ) 10 GIGABIT ETHERNET MAX. LINK DISTANCE ( Meters ) 850 nm 1300 nm 1310 nm 1550 nm 850 nm 1300 nm 850 nm 1300 nm 850 nm 1300 nm 62.5/125 OM1 3.5 1.2 N/A N/A 200 600 N/A 300 550 32 N/A 50/125 OM2 BIF 3.5 1.2 N/A N/A 500 500 N/A 600 600 82 N/A 50/125 OM3 BIF 3.0 1.2 N/A N/A 1500 500 2000 1000 550 300 N/A 50/125 OM4 BIF 3.0 1.2 N/A N/A 3500 550 4700 1040 550 550 N/A SM OS2 (G.652D/ G.657.A1) N/A N/A 0.4 0.4 N/A N/A N/A N/A N/A N/A N/A BIF = Bend Insensitive Fiber
© 2013, AFL, all rights reserved. PP-1-00030, Revision 17, 11.15.2022 Specifications are subject to change without notice. AFLglobal.com | 800.235.3423 2 FIBER OPTIC CABLE eABF ® Fiber Optic Cable Premise Cable Enterprise Blown Fiber (eABF) Cable (cont.) Mechanical Data—Riser (OFNR) DURA-LINE NO. DESCRIPTION PRODUCT TYPE FIBER COUNT NOMINAL DIAMETER WEIGHT MAXIMUM TENSILE LOAD MINIMUM BEND RADIUS INCHES (MM) LBS/1,000 FT (KG/KM) SHORT TERM LBS (N) LONG TERM LBS (N) SHORT TERM INCHES MM) LONG TERM INCHES (MM) 20002960 MicroCable Riser ENT-A SM-6 SMF 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002866 MicroCable Riser ENT-A SM-12 SMF 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20000729 MicroCable Riser ENT-A SM-24 SMF 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20000730 MicroCable Riser ENT-A SM-48 SMF 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003201 MicroCable Riser ENT-A SM-72 SMF 72 0.18 (4.5) 14.0 (20.8) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20003628 MicroCable Riser SMF-72 200 μm SMF 200 μm 72 0.15 (3.8) 11.0 (16.4) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003630 MicroCable Riser ENT-A SM-96 SMF 200 μm 96 0.18 (4.5) 16.0 (23.8) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20002961 MicroCable Riser ENT-A OM1-6 OM1 (62.5/125) 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002848 MicroCable Riser ENT-A OM1-12 OM1 (62.5/125) 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002962 MicroCable Riser ENT-A OM1-24 OM1 (62.5/125) 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002963 MicroCable Riser ENT-A OM1-48 OM1 (62.5/125) 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003333 MicroCable Riser ENT-A OM1-72 OM1 (62.5/125) 72 0.18 (4.5) 14.0 (20.8) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20002964 MicroCable Riser ENT-A OM2-6 OM2 (50/125) 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002965 MicroCable Riser ENT-A OM2-12 OM2 (50/125) 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002966 MicroCable Riser ENT-A OM2-24 OM2 (50/125) 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002967 MicroCable Riser ENT-A OM2-48 OM2 (50/125) 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003334 MicroCable Riser ENT-A OM2-72 OM2 (50/125) 72 0.18 (4.5) 14.0 (20.8) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20002968 MicroCable Riser ENT-A OM3-6 OM3 (50/125) 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002969 MicroCable Riser ENT-A OM3-12 OM3 (50/125) 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20000695 MicroCable Riser ENT-A OM3-24 OM3 (50/125) 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002883 MicroCable Riser ENT-A OM3-48 OM3 (50/125) 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003335 MicroCable Riser ENT-A OM3-72 OM3 (50/125) 72 0.18 (4.5) 14.0 (20.8) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20002970 MicroCable Riser ENT-A OM4-6 OM4 (50/125) 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002971 MicroCable Riser ENT-A OM4-12 OM4 (50/125) 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002972 MicroCable Riser ENT-A OM4-24 OM4 (50/125) 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20000696 MicroCable Riser ENT-A OM4-48 OM4 (50/125) 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003272 MicroCable Riser ENT-A OM4-72 OM4 (50/125) 72 0.18 (4.5) 14.0 (20.8) 22 (100) 7 (30) 3.6 (90) 1.8 (45) continued
3 FIBER OPTIC CABLE eABF ® Fiber Optic Cable © 2013, AFL, all rights reserved. PP-1-00030, Revision 17, 11.15.2022 Specifications are subject to change without notice. AFLglobal.com | 800.235.3423 Enterprise Blown Fiber (eABF) Cable (cont.) Mechanical Data—Plenum (OFNP) DURA-LINE NO. DESCRIPTION PRODUCT TYPE FIBER COUNT NOMINAL DIAMETER WEIGHT MAXIMUM TENSILE LOAD MINIMUM BEND RADIUS INCHES (MM) LBS/1,000 FT (KG/KM) SHORT TERM LBS (N) LONG TERM LBS (N) SHORT TERM INCHES MM) LONG TERM INCHES (MM) 20002973 MicroCable Plenum ENT-A SM-6 SMF 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002974 MicroCable Plenum ENT-A SM-12 SMF 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002975 MicroCable Plenum ENT-A SM-24 SMF 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20001451 MicroCable Plenum ENT-A SM-48 SMF 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003337 MicroCable Plenum ENT-A SM-72 SMF 72 0.18 (4.5) 15.0 (22.3) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20003629 MicroCable Plenum SMF-72 200 μm SMF 200 μm 72 0.15 (3.8) 11.0 (16.4) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003631 MicroCable Plenum ENT-A SM-96 SMF 200 μm 96 0.18 (4.5) 16.0 (23.8) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20002976 MicroCable Plenum ENT-A M1-6 OM1 (62.5/125) 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002977 MicroCable Plenum ENT-A OM1-12 OM1 (62.5/125) 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002978 MicroCable Plenum ENT-A OM1-24 OM1 (62.5/125) 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002979 MicroCable Plenum ENT-A OM1-48 OM1 (62.5/125) 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003338 MicroCable Plenum ENT-A OM1-72 OM1 (62.5/125) 72 0.18 (4.5) 15.0 (22.3) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20002980 MicroCable Plenum ENT-A OM2-6 OM2 (50/125) 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002981 MicroCable Plenum ENT-A OM2-12 OM2 (50/125) 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002982 MicroCable Plenum ENT-A OM2-24 OM2 (50/125) 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002983 MicroCable Plenum ENT-A OM2-48 OM2 (50/125) 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003339 MicroCable Plenum ENT-A OM2-72 OM2 (50/125) 72 0.18 (4.5) 15.0 (22.3) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20002984 MicroCable Plenum ENT-A OM3-6 OM3 (50/125) 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002985 MicroCable Plenum ENT-A OM3-12 OM3 (50/125) 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002986 MicroCable Plenum ENT-A OM3-24 OM3 (50/125) 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002987 MicroCable Plenum ENT-A OM3-48 OM3 (50/125) 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003340 MicroCable Plenum ENT-A OM3-72 OM3 (50/125) 72 0.18 (4.5) 15.0 (22.3) 22 (100) 7 (30) 3.6 (90) 1.8 (45) 20002988 MicroCable Plenum ENT-A OM4-6 OM4 (50/125) 6 0.14 (3.6) 6.4 (9.5) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002989 MicroCable Plenum ENT-A OM4-12 OM4 (50/125) 12 0.14 (3.6) 6.7 (10.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002990 MicroCable Plenum ENT-A OM4-24 OM4 (50/125) 24 0.14 (3.6) 7.4 (11.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20002919 MicroCable Plenum ENT-A OM4-48 OM4 (50/125) 48 0.15 (3.8) 9.4 (14.0) 22 (100) 7 (30) 1.2 (30) 0.8 (20) 20003341 MicroCable Plenum ENT-A OM4-72 OM4 (50/125) 72 0.18 (4.5) 15.0 (22.3) 22 (100) 7 (30) 3.6 (90) 1.8 (45) Contact AFL for packaging details or any further questions. Qualifications GOVERNING BODY STANDARD CODE COMPONENT Telcordia GR-409-CORE Fiber Optic Cable RoHS 2015/863 Fiber Optic Cable UL 1666 (OFNR) Riser Cables NEC 2005 Art 770.51 (B) Riser Cables NFPA 262 OFNP Plenum Cables Temperature Specifications TEMPERATURE RANGE INSTALLATION 0ºC to +70ºC OPERATING* 0ºC to +70ºC STORAGE -40ºC to +75ºC *Not intended for outside plant access during operational use.
Merkmale:
- Enthält wasserblockierende Komponenten für zusätzlichen Schutz der Fasern vor versehentlichem Wassereintritt
- Kann in eABF-Kanälen oder Kanalsystemen anderer Hersteller installiert werden
- Komplettes Sortiment an Singlemode- und Multimode-Fasern zur Unterstützung von 10G, 40G und 100G Ethernet-Architekturen
- Aramid-verstärkter Kabelkern für robuste Zugbelastbarkeit
- OD-kompatibel mit 6 mm ID Micro-ducts für Faserpfadlösungen mit höherer Dichte
- 96 Fasern passen in einen 8,5 mm x 6 mm Micro-Kanal für bis zu 2.304 Fasern pro 24-fach Dura-Line FuturePath Duct
Anwendungen:
- Entwickelt für Data Center Interconnect
- Horizontale Verteilung
- Backbone-Verteilung
- Kostengünstige Migrationsstrategien für Glasfaser-Upgrades
Die eABF-Kabel wurden von AFL entwickelt, um die robusteste und zuverlässigste Blown-Fiber-Lösung für Unternehmen zu bieten, die derzeit auf dem Markt erhältlich ist. Das zum Patent angemeldete Kabeldesign kombiniert ein leichtes, widerstandsfähiges Mantelsystem, das es ermöglicht, das Kabel über große Entfernungen zu verlegen. Die Kabelserie zeichnet sich durch zusätzliche Eigenschaften aus, die dieses Produkt von herkömmlichen Blasfaserkabeln abheben. Zu diesen verbesserten Merkmalen gehört eine mechanische Verstärkung, die es dem Kabel ermöglicht, die Industriestandard-Spezifikationen für die Verbindung von Räumlichkeiten zu erfüllen. Darüber hinaus weisen die eABF-Kabelserien flammwidrige Eigenschaften auf, die zu eigenständigen Steigleitungen und Plenumoptionen führen, die für die Verlegung außerhalb des Mikrokanalsystems geeignet sind. Aufgrund dieser mechanischen, umwelttechnischen und optischen Qualifikationen können eABF-Kabel auch in flammgeschützten Kanal- und Leitungssystemen von Drittanbietern installiert werden.
Furcation-Rohr-Glasfaserkabel | Spezifikationen & Kompatibilität | AFL EMEA Deutschland,Simplex-Glasfaserkabel | Spezifikationen & Kompatibilität | AFL EMEA Deutschland,Zipcord DualLink und MicroDual Kabel | AFL EMEA Germany,Glasfaserkabel für die Verlegung in Schutzrohren | Spezifikationen & Kompatibilität | AFL EMEA Deutschland,GelFree Riser Nicht gepanzertes Loses Rohr LV Serie Ge | AFL EMEA Germany,InnenAuen gepanzertes, dicht gepuffertes Rundkabel fr | AFL EMEA Germany,Indoor/Outdoor Breakout-Kabel | AFL EMEA Deutschland,Innen-/Auenbereich Multigert Plenumdichtes, gepufferte | AFL EMEA Germany,IndoorOutdoor Multi Unit Riser Dichtes gepuffertes Kab | AFL EMEA Germany,Innen/Auen Plenum Verteilerkabel | AFL EMEA Germany,Indoor/Outdoor Steigleitungskabel mit vormontiertem MicroCore-Kabel | AFL EMEA Deutschland,Indoor/Outdoor Steigleitungs-Subunitized MicroCore Kabel mit S | AFL EMEA Deutschland,IndoorOutdoor Riser Dicht gepuffertes Kabel | AFL EMEA Deutschland,Raucharmes, halogenfreies Breakout-Kabel fr den Innen- | AFL EMEA Germany
1713