Los medidores de potencia óptica OPM4 y OPM5 de AFL son herramientas versátiles para probar todo tipo de redes: FTTx/FTTh, LAN/WAN, Telco, CATV, etc. Robustos y fáciles de transportar, los OPM4 y OPM5 proporcionan mediciones precisas de la señal. Cuando se empareja con una fuente óptica de AFL, la función WaveID aumenta la eficiencia al permitir la medición simultánea de dos o más longitudes de onda, al tiempo que reduce los errores del técnico con la adaptación automática de la longitud de onda (fuente a medidor).
250b59e9939b4ab7828c992e2055565b
AFLglobal.com 1 (800) 235-3423 © 2021-2025, AFL, all rights reserved. OPM0-00-2000 Revision AF 2025-10-07 Specifications are subject to change without notice. Test and Inspection OPM5 and OPM4 Optical Power Meters 1 AFL is a trusted supplier of optical testing equipment with more than 30 years of experience and tens of thousands of units in use in the field. AFL’s full range of power meters are used for testing single-mode and/or multimode fiber networks. Power meters with wave ID can detect two or more wavelengths simultaneously – decreasing test time and reducing user errors when paired with AFL wave ID light sources. Designed for the real world: AFL’s power meters are designed to meet the demands of the outside plant environment. They withstand the one-meter drop test and have splash resistant controls that are easy to use, even with gloves on. Flexible and efficient: A range of field-swappable output adapters enables access for cleaning optical ports and supports multiple connector styles. The efficient design provides long test time from globally available AA batteries. Equipped with five-minute auto-off feature to save power. Reduce test time and errors: Wave ID (Dual or Single) decreases test time while reducing technician errors. Stores test results: AFL’s OPM5 stores optical reference at each calibrated wavelength. This enables technicians to organize test results into multiple files and transfer stored results via USB to the included PC-based TRM ® 3.0 software for analyzing, generating reports, and printing. Users can generate network Pass/Fail results demonstrating compliance to industry standards and illustrate headroom. Fully N.I.S.T. traceable. Features • Rugged, dependable, and backed by industry-best 5-year warranty • Wave ID tests up to three wavelengths simultaneously - slashing test time • Field-swappable connector adapters for maximum flexibility • Long battery life from globally available AA batteries Applications • Passive Optical Networks (PON) testing • OPM4-2D (Ge) for premises LAN/WAN multimode or single-mode networks • OPM(5/4)-3D (InGaAs) for telecommunications networks • OPM5-4D (Filtered-InGaAs) for high power (+26 dBm) CATV broadband networks or DWDM system applications OPM5 Optical Power Meter
AFLglobal.com 1 (800) 235-3423 © 2021-2025, AFL, all rights reserved. OPM0-00-2000 Revision AF 2025-10-07 Specifications are subject to change without notice. Test and Inspection OPM5 and OPM4 Optical Power Meters 2 General Power 2 x AA batteries, accepts standard mini-USB power adapter Adapter Caps Order with one: 1.25 mm Universal, 2.5 mm Universal, FC, SC, ST, LC. Other connector adapters available Battery Life 300 hours Operating Temperature -10 °C to 50 °C, 95 % RH (non-condensing) Storage Temperature -30 °C to 60 °C, 95 % RH (non-condensing) Size (H x W x D) 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in) Weight 0.26 kg (0.58 lb) Notes: a. All specifications valid at 25°C unless otherwise specified. b. Accuracy measured at 25 ºC and -10 dBm per N.I.S.T. standards. Ordering Information All OPM models include optical power meter, 2 AA batteries, protective rubber boot, customer specified adapter cap, and carry case. OPM5 models also include TRM ® 2.0 software (Basic License). CC M N OPM Detector Type (N) N = 4, 3, 2, 1 Connector (CC) CC = FC, SC, ST, LC, 2.5 mm, 1.25 mm (ONE ONLY!) Model Number (M) M = 5, 4 Model Calibrated Wavelengths (nm) Detector Type Measurement Range (dBm) PC Software 850 980 1300 1310 1490 1550 1625 OPM4-2D Germanium +6 to -60 OPM4-3D InGaAs +10 to -75 OPM5-3D InGaAs +10 to -75 TRM 3.0 OPM5-4D InGaAs +26 to -50 TRM 3.0 When placing an order, select options as follows: • Model Number (M) • Detector Type (N) • Connector Configuration (CC) Specifications a Optical Model OPM4-2D OPM4-3D, OPM5-3D OPM5-4D Calibrated Wavelengths 850, 1300, 1310, 1490, 1550 nm 850, 1300, 1310, 1490, 1550, 1625 nm 850, 980, 1300, 1310, 1490, 1550, 1625 nm Detector Type Germanium (Ge) InGaAs Filtered InGaAs Measurement Range +6 to -60 dBm +10 to -75 dBm +26 to -50 dBm Tone Detect Range +6 to -50 dBm +6 to -45 dBm for 850 nm +10 to -50 dBm +10 to -45 dBm for 850 nm +6 to -30 dBm +6 to -25 dBm for 850 nm Wavelength ID Range +6 to -50 dBm +6 to -45 dBm for 850 nm +10 to -50 dBm +10 to -45 dBm for 850 nm +6 to -30 dBm +6 to -25 dBm for 850 nm Accuracy b ±0.1 dB (typical); ±0.25 dB Resolution 0.01 dB Measurement Units dB, dBm, μW
AFLglobal.com 1 (800) 235-3423 © 2021-2025, AFL, all rights reserved. OPM0-00-2000 Revision AF 2025-10-07 Specifications are subject to change without notice. Test and Inspection OPM5 and OPM4 Optical Power Meters 3 OPM Accessories AFL NO. Description Adapter Caps 8800-00-0214 2.5 mm Universal (accepts FC, SC, and ST ferrules) 8800-00-0224 1.25 mm Universal (accepts LC and MU ferrules) 8800-00-0200 FC 8800-00-0209 SC 8800-00-0202 ST ® 8800-00-0225 LC simplex 8800-00-0221 E-2000 8800-00-0219 2.5 mm open Universal. Accepts SC duplex, OptiTap connector for measuring optical power. 8800-00-0203 SMA 8800-00-0201 D4 8800-00-0204 Biconic USB Cable 6000-00-0024MR USB Cable: PC (USB-A) to OPM (USB-MINI B): • Connect OPM to PC for data upload to TRM ® 3.0 • External Power for OPM (when used with customer supplied USB-A power source) OPM5 MODEL OPM4 MODEL Connect to PC and External power External power only Test Management and Reporting Software AFL NO. Description TTRM3-BASIC TRM ® 3.0 with Basic License, USB delivery
AFLglobal.com 1 (800) 235-3423 © 2021-2025, AFL, all rights reserved. OPM0-00-2000 Revision AF 2025-10-07 Specifications are subject to change without notice. Test and Inspection OPM5 and OPM4 Optical Power Meters 4 Qualificati ons Category Regulation/Standard Qualification CE Marking EU Compliant to relevant EU Directives on health, safety, and environmental protection, and certified with CE marking Safety/EMC/EMI IEC Compliant to IEC 61010-1 for safety requirements for electrical equipment EN Compliant to EN 61010-1 for safety requirements for electrical equipment IEC Compliant to IEC 61326-1 for EMC requirements for electrical equipment EN Compliant to EN 61326-1 for EMC requirements for electrical equipment EN Compliant to EN 55011 for EMC requirements for industrial, scientific and medical equipment RoHS EU Compliant to EU regulations Directive 2011/65/EU (RoHS 2) and Directive 2015/863 (RoHS 3) Test Method TIA Compliant to TIA-568.3-D for test and measurement requirements for premises optical fiber cabling and components IEC Compliant to IEC 11801 for test and measurement requirements for optical fiber cabling for use within premises EN Compliant to EN 50173 for test and measurement requirements for optical fiber cabling for use within premises AS/NZS Compliant to AS/NZS 3080 for test and measurement requirements for optical fiber cabling for use within premises TIA Compliant to TIA-526-7 for test procedures for installed optical fiber cable plant TIA Compliant to TIA-526-14 for test procedures for installed optical fiber cable plant IEC Compliant to IEC 14763-3 for systems and methods for the inspection and testing of installed optical fiber cabling AS/NZS Compliant to AS/NZS 14763.3 for systems and methods for the inspection and testing of installed optical fiber cabling IEC Compliant to IEC 61280-4-1 for test procedures for installed optical fiber cable plant IEC Compliant to IEC 61280-4-2 for test procedures for installed optical fiber cable plant Generic Requirement IEC Compliant to IEC 61315 for requirements on calibration of fibre-optic power meters Contact Sales@AFLglobal.com to schedule a demonstration or learn how to buy. Visit www.AFLglobal.com/Test to learn more about OPM5 and OPM4 optical power meters. International Sales and Service Contact Information available at www.AFLglobal.com/Test/Contacts Recommended Products FlexScan® FS300 (Quad) and FS200 (SM) OTDRs • SmartAuto ® 1-button automated testing for fast results • LinkMap ® color-coded icons for easy troubleshooting • FleXpress ® mode (FS200) completes OTDR test in <5 seconds! • Integrated Source, Power Meter and VFL Optical Light Sources • Encircled Flux Compliant • 5-Year Product Warranty • Integrated LED and Laser light sources FS200 FS300
Características:
- Robusto, fiable y respaldado por la mejor garantía del sector de 5 años
- La identificación de ondas comprueba hasta tres longitudes de onda simultáneamente, lo que reduce el tiempo de prueba
- Adaptadores de conectores intercambiables en campo para una máxima flexibilidad
- Larga duración de las pilas AA disponibles en todo el mundo
Aplicaciones:
- Pruebas de redes ópticas pasivas (PON)
- OPM(5/4)-4D (InGaAs filtrado) para redes de banda ancha de CATV de alta potencia (+26 dBm) o aplicaciones de sistemas DWDM
- OPM(5/4)-3D (InGaAs) para redes de telecomunicaciones
- OPM(5/4)-2D (Ge) para redes locales LAN/WAN multimodo o monomodo
AFL es un proveedor de confianza de equipos de pruebas ópticas con más de 30 años de experiencia y decenas de miles de unidades en uso sobre el terreno. La gama completa de medidores de potencia de AFL’se utiliza para probar redes de fibra monomodo y/o multimodo. Los medidores de potencia con ID de onda pueden detectar dos o más longitudes de onda simultáneamente –
disminuyendo el tiempo de prueba y reduciendo los errores del usuario cuando se emparejan con las fuentes de luz con ID de onda AFL.
Diseñado para el mundo real: Los medidores de potencia de AFL’están diseñados para satisfacer las exigencias del entorno exterior de la planta. Soportan la prueba de caída de un metro y tienen controles resistentes a las salpicaduras que son fáciles de usar, incluso con guantes.
Flexible y eficiente: Una gama de adaptadores de salida intercambiables sobre el terreno permite el acceso para la limpieza de los puertos ópticos y admite múltiples estilos de conectores. El eficiente diseño proporciona un largo tiempo de prueba con las pilas AA disponibles en todo el mundo. Equipada con la función de apagado automático en cinco minutos para ahorrar energía.
Reduzca el tiempo de las pruebas y los errores: La identificación de la onda (triple, doble o simple) disminuye el tiempo de prueba y reduce los errores del técnico.
Almacena los resultados de las pruebas: AFL’s OPM5 almacena la referencia óptica en cada longitud de onda calibrada. Esto permite a los técnicos organizar los resultados de las pruebas en varios archivos y transferir los resultados almacenados a través de USB al software TRM® 2.0 incluido para analizarlos, generar informes e imprimirlos. Los usuarios pueden generar resultados de red de tipo "Pasa/Falla" que demuestran el cumplimiento de las normas del sector e ilustran el margen de maniobra. Totalmente rastreable por N.I.S.T.
Consulte la hoja de especificaciones para ver la lista completa de modelos y accesorios opcionales.
Fuentes de luz y kits de prueba que cumplen con el flu | AFL EMEA Spain,Kits de prueba de prdidas pticas SLP56D SLP5 | AFL EMEA Spain,Fuentes lser de triple longitud de onda OLS7 | AFL EMEA Spain,Fuentes de luz que cumplen con el flujo EF | AFL EMEA Spain,Fuentes de luz de la serie OLS | AFL EMEA Spain,OLS2 Fuente de lser doble con identificacin de onda | AFL EMEA Spain,Adaptadores de puerto de prueba, prueba e inspección | Especificaciones | AFL EMEA España,Fuentes de luz y medidores de potencia de la serie Con | AFL EMEA Spain,Medidor de potencia óptica PON FlowScout | AFL EMEA España,Medidor de potencia ptica OPM5 con almacenamiento de d | AFL EMEA Spain,Adaptadores de conectores para medidores de potencia | AFL EMEA Spain
2098