Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Fibre Cable 1 © 2002-2023, AFL, all rights reserved. 1481, Revision 5, 29.08.23 Specifications are subject to change without notice. Actual finished product may vary from illustration. 72 Fibre Long Span ADSS Cable Stranded ADSS cable comprising up to 72 optical fibres contained in jelly-filled loose tubes (up to 12 fibres per tube). The tubes and fillers are laid around a central strength member and contained within a dry, water blocked cable core which is sheathed with polyethylene reinforced with aramid yarn and outer sheathed with UV stable Polyethylene. Surface printing includes sequential length marking at one metre intervals. Part Number SMJ6**LE0††BK Applicable Specifications AS/CA S008, AS 1049, AS/NZS 11801-1, TIA-598-D, IEC 60793, IEC 60794, ITU-T Recommendations Applications AFL all dielectric self-supporting cables are principally used for aerial installations - typically on roadside power distribution poles. Being totally non-metallic, it is ideal for applications in close proximity to power distribution lines. It is also suitable for single point suspension applications such as, down mine shafts or where the cable has to support higher load by providing fixed/variable tensile strength along the outer sheath. UV stabilised outer sheath as per AS 1049. Standard pole-mounting hardware is also readily available for this product. Contact AFL for assistance with sag-tension calculations or other application support. Physical Characteristics SPECIFICATION UNIT VALUE Nominal Tube Diameter mm 2.7 Nominal Cable Diameter mm 14.3 Nominal Weight kg/km 157 Temperature Range °C -40 to 70 Max Allowable Load kN 14 Zero Fibre Strain Limit % 1 Min. Bending Radius - Under Load mm 20 x OD Min. Bending Radius - No Load mm 10 x OD Max. Crush Resistance kN/100 mm 2 Effective Modulus GPa 11.1 Effective Area mm 2 125 CLTE ppm/°C 6.8 MCBL kN 34.9 Stringing Examples CONDITIONS UNITS EDS SEVERE 1 SEVERE 2 SEVERE 3 TEMP °C 15 -10 0 0 WIND (km/hr) 0 140 120 120 ICE mm 0 0 2 0 SPAN m 350/450/600 350 450 600 SAG M 12.3/20.6/37.1 21.4 (2.07*) 31.4 (5.32*) 47.8 (6.3*) TENSION kN 1.9 11.2 12 11 CABLE STRAIN % 0.14 0.81 0.87 0.8 ** Represents fibre type: 1D = SM G.652.D 'LWP'. Note: Other fibre types on request. †† Represents any fibre-count up to 72. Refer to OSP Cable - Optical Characteristics for further information. *Vertical component of sag Total sag under wind Cable Components Outer Polyethylene Sheath Aramid Peripheral Strength Element Inner Polyethylene Sheath Moisture Resistant Jelly-Filled Loose Tube Optical Fibre Central Strength Member