The Fujikura 100R mass fusion splicer introduces Intelligent Alignment Control to deliver more reliable, uniform splices by automatically correcting fiber placement, end‑face gaps, and axis alignment across all fibers.
37aef37bc99b4a8f863f84725f104c09
1 © 2002-2026, AFL, all rights reserved. 2410, Revision 00, 27.05.26 Specifications are subject to change without notice. Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Fibre Termination and Splicing Features • Intelligent Alignment Controls for hands-free alignment • Auto Placement Correction for proper fibre seating • Gap Alignment Correction for uniform endface gaps • Axis Offset Correction for consistent fibre alignment • Cleaver tracking and upkeep with wireless communication • Automated wind protector, tube heater and splice operation • User replaceable V-grooves • Graphical User Interface with 5.0" Touchscreen • Multi-function transit case with integrated workstation Applications • Data Center cable installation • High fibre count metro and campus networks • Long-haul network installs and repairs • Trunk cable repair with Splice-on MPOs • Ribbon splicing high-density cables with 200 μm loose fibre Fujikura 100R Fusion Splicer The Fujikura 100R mass fusion splicer introduces Intelligent Alignment Control to deliver more reliable, uniform splices by automatically correcting fibre placement, end - face gaps, and axis alignment across all fibres. Intelligent Alignment Control in the 100R enhances splice reliability by automatically correcting improper fibre seating, minimizing end-face gap variation, and stabilizing fibre-axis alignment across all fibres. Adjustable control levels allow the system to balance precision and cycle time, ensuring the best splice results across broadband or hyperscale applications. Auto Placement Correction automatically detects and corrects fibres that are improperly seated in the V - groove prior to fusion. By automatically lifting the clamp and adjusting the Z - stage as needed, the system ensures proper fibre placement, reducing splice variability, and minimizing manual intervention. Gap Alignment Correction automatically reduces variation in endface gaps across fibres prior to fusion. By continuously adjusting alignment until the target range is met, the 100R improves splice uniformity and consistency while completing the correction in as little as one second. Axis Offset Correction reduces fibre axis position offsets across all fibres prior to fusion. By performing controlled, automatic alignment adjustments, the 100R improves splice uniformity and consistency while applying corrections only as needed to maintain efficient cycle times. With the Fujikura 100R, you can keep your splicer in the field longer thanks to the included, field-replaceable V-grooves.
Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Fibre Termination and Splicing 2 © 2002-2026, AFL, all rights reserved. 2410, Revision 00, 27.05.26 Specifications are subject to change without notice. Ordering Information DESCRIPTION AFL NO. Fujikura 100R Fusion Splicer Kit with CT60 and RS03 Includes: BTR-19 Battery, ADC-22 AC Adapter, AC Power Cord, CT60 Cleaver, RS03 Stripper with internal BTR-12A battery, ADC-09A AC Adapter with AC Power Cord, ELCT2-16C Spare Electrodes (pair) with spare V-Grooves (VG12-02), FH-80-12 Fibre Holders (pair), USB-02 Cable, Alcohol Dispenser, Quick Reference Guide, TS-04A Splicer Tripod Screw, TS-04B Cleaver Tripod Screw, On-board Instructional Manual, CC-48 Transit Case, Three-year Warranty, ST-02 Fusion Splicer Strap, Cotton Tips, Safety Glasses, Sharps Container . FUJ100R12-CT60-RS03 Fujikura 100R Fusion Splicer Kit with CT60 and RS02 Includes: BTR-19 Battery, ADC-22 AC Adapter, AC Power Cord, CT60 Cleaver, RS02 Stripper, DCC-11 Splicer to Stripper Power Cord, ELCT2-16C Spare Electrodes (pair) with spare V-Grooves (VG12-02), FH-80-12 Fibre Holders (pair), USB-02 Cable, Alcohol Dispenser, Quick Reference Guide, TS-04A Splicer Tripod Screw, TS-04B Cleaver Tripod Screw, On-board Instructional Manual, CC-48 Transit Case, Three-year Warranty, ST-02 Fusion Splicer Strap, Cotton Tips, Safety Glasses, Sharps Container . FUJ100R12-CT60-RS02 Fujikura 100R Fusion Splicer Kit with CT60 and RS01 (Radio Silent - No Bluetooth) Includes: BTR-19 Battery, ADC-22 AC Adapter, AC Power Cord, CT60 Cleaver, RS01 Stripper, DCC-11 Splicer to Stripper Power Cord, ELCT2-16C Spare Electrodes (pair) with spare V-Grooves (VG12-02), FH-80-12 Fibre Holders (pair), USB-02 Cable, Alcohol Dispenser, Quick Reference Guide, TS-04A Splicer Tripod Screw, TS-04B Cleaver Tripod Screw, On-board Instructional Manual, CC-48 Transit Case, Three-year Warranty, ST-02 Fusion Splicer Strap, Cotton Tips, Safety Glasses, Sharps Container . FUJ100R12-CT60-RS01-NW Fujikura 100R Fusion Splicer Auto Placement Correction (before on left; after on right) Gap Alignment Correction (before on left; after on right) Intelligent Alignment Control Features
Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Fibre Termination and Splicing 3 © 2002-2026, AFL, all rights reserved. 2410, Revision 00, 27.05.26 Specifications are subject to change without notice. Fujikura 100R Fusion Splicer Recommended Products for the 100R DESCRIPTION AFL NO. Cleavers and Strippers CT60 Cleaver S018654 RS01 Thermal Stripper S016815 RS02 Thermal Stripper S016816 RS03 Thermal Stripper S016817 Fibre Holders and V-Grooves FH-80-2 Fibre Holder S018726 FH-80-4 Fibre Holder S018727 FH-80-5 Fibre Holder S018728 FH-80-6 Fibre Holder S018729 FH-80-8 Fibre Holder S018730 FH-80-9 Fibre Holder S018731 FH-80-10 Fibre Holder S018732 FH-80-12 Fibre Holder S018733 FH-80-12-200 Fibre Holder S018734 FH-80-12PC 200 to 250 μm Pitch Conversion Fibre Holder S018735 FH-80-16 Fibre Holder S018736 FH-80-16-200 Fibre Holder S018737 FH-80-16PC 200 to 250 μm Pitch Conversion Fibre Holder S018738 FH-70-250 (250 μm coated fibre) S017111 FH-70-900 (900 μm jacketed fibre) S017113 FH-70-160 (160 μm coated fibre) S017095 FH-60-LT900 (Loose buffer 900 μm fibre) S015181 VG16-02 16 Fibre/250 μm V-Groove S018739 VG16-02-200 16 Fibre/200 μm V-Groove S018740 VG12-02 12 Fibre/250 μm V-Groove S018741 VG12-02-200 12 Fibre/200 μm V-Groove S018742 VG08-02 8 Fibre/250 μm V-Groove S018743 VG04-02 4 Fibre/250 μm V-Groove S018744 FuseConnect ® Accessories FH-FC-20 (900 μm within 2.0 mm sheathing) (each) S014696 FH-FC-30 (900 μm within 3.0 mm sheathing) (pair) S014695 FH-FC-900 (900 μm cable) (each) S014697 CLAMP-FC-2000 (pair) S014705 DESCRIPTION AFL NO. Batteries and Power Cords ADC-22 AC Adapter S018666 BTR-19 Battery S018670 DCC-11 splicer to ribbon stripper power cord S013852 DCC-20 Power Cord Connects ADC-20 to cigarette lighter socket S017527 DCC-21 Power Cord Connects ADC-20 to power source via alligator clips S017528 Miscellaneous SS01 Single fibre stripper (1 hole) S017099 ELCT2-16C Electrodes S018669 WT-11R Work Tray Right S018674 WT-11L Work Tray Left S018673 JP-12 Work Tray J-Plate (Splicer Mount) S018681 JP-11 J-Plate (Cooling tray attaches to splicer) S018675 TS-04B Cleaver Tripod Screw S018691 TS-04A Splicer Tripod Screw (90 Series) S018677 ST-02 Fusion Splicer Strap S017525 CLAMP-DC-12 (Drop Cable clamp on work tray) S017550 FST-12 Fibre Separation Tool S014012 RT-02 Fibre Arrangement Tool S017465* CC-48 Transit Case S018672 Splicer V-groove Cleaning Kit S014397 ST-03 Case and Work Tray Strap S017549 Fujikura 100R Fusion Splicer Kit with CT60 and RS03 (S018665)
Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Fibre Termination and Splicing 4 © 2002-2026, AFL, all rights reserved. 2410, Revision 00, 27.05.26 Specifications are subject to change without notice. Environmental Condition Temperature Operate: -10 to 50ºC Storage: -40 to 80ºC Humidity Operate: 0 to 95% RH non-condensing Storage: 0 to 95% RH non-condensing Altitude Max. 3,700 m AC Adaptor Input AC100 to 240 V, 50/60 Hz, Max. 1.5A Approx. DC 12V, Max. 7A Battery Pack Type Rechargeable Lithium Ion Output Approx. DC12V , Max. 5A Capacity Approx. 165 Splices with Heat Shrink Temperature Operate: -10 to +50º C Recharge: 0 to +40º C Storage < One (1) year: -20 to +20°C Storage < Three (3) Months: -20 to +40°C Storage < One (1) Month: -20 to +50° Recharge Time ≤ Six (6) Hours from Empty Battery Life Approximately 500 Recharge Cycles Display LCD Monitor TFT 4.95 inch with Touch Screen Magnification Approx. 30x: 12-Fibre Ribbon Approx. 90x: Single Fibre Illumination V-Grooves LED lamp Interface PC USB2.0 Type C (USB PD compatible) External LED Lamp USB2.0 A type, Approx. DC5V, 500 mA Ribbon Stripper Mini DIN 6 pin, DC12V, Max. 1A Wireless Bluetooth 5.2 LE Data Storage Splice Mode 100 Splice Modes Heat Mode 30 Heat Modes Splice Result 20,000 Splices Splice Image 100 Images Fujikura 100R Fusion Splicer Specifications PARAMETER VALUE Fibre Alignment Method Self-Cladding alignment with Surface Melting Tension Fibre Count Can Be Spliced Single and up to 16 Fibre Ribbon with Applicable V-groove Applicable Fibre Fibre type Singlemode Fibre Multi-mode Fibre Cladding Dia. Approx.125 μm Applicable Coating Fibre Holder Coating Shape.: Refer to Options Cleave Length: Approx. 10 mm Fibre Splice Performance Splice Loss ITU-T G.652 : Avg. 0.05 dB ITU-T G.651 : Avg. 0.02 dB ITU-T G.653 : Avg. 0.08 dB ITU-T G.655 : Avg. 0.08 dB ITU-T G.657 : Avg. 0.08 dB Splice Time SM FAST Mode: Avg. 16 to 18 Seconds SM AUTO Mode: Avg. 19 to 21 Seconds Applicable Protection Sleeve Sleeve Type Heat-shrinkable sleeve Sleeve Length Max. 66 mm Sleeve Dia. Max. 6.0 mm before shrinking Sleeve Heat Performance Heat Time 40 mm FP-05 Mode: Avg 33 to 40 Seconds 40 mm FP-04T Fast Mode: Avg 19 to 26 Seconds Single 60 mm Mode: Avg. 8 to 15 Seconds Fibre Tensile Test Force Approx. 2.0 N Electrode Life Approx. 1,500 Splices Physical Description Dimensions W 157 mm Dimensions D 178 mm Dimensions H 171 mm Weight 2.6 kg including battery
Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Fibre Termination and Splicing 5 © 2002-2026, AFL, all rights reserved. 2410, Revision 00, 27.05.26 Specifications are subject to change without notice. Specifications Other Features Automatic Functions Splice-mode Select by Fibre Count Analysis Fusion Power Calibration Fully Automatic Cleaver Blade Management Wind Protector: Open and Close Clamp: Auto Clamping Force Adjustment Z-Holder Base: Auto Placement Correction Z-Holder Base: Gap Alignment Correction Splice Start Heater Lid: Open and Close Heater Clamp: Open and Close Heater Start Reference Guide Video and PDF Stored in Splicer Electrode Replaceable without Tool Sheath Clamp Splicer Update via Internet Parameter Upload and Download Operating Splicer with PC Splice Image Download to PC GPS Splice Location Recorded to Memory GEO Fencing Screw Hole for Tripod 1/4-20 UNC Fujikura 100R Fusion Splicer
Features
- Intelligent Alignment Controls for hands-free alignment
- Auto Placement Correction for proper fiber seating
- Gap Alignment Correction for uniform endface gaps
- Axis Offset Correction for consistent fiber alignment
- Cleaver tracking and upkeep with wireless communication
- Automated wind protector, tube heater and splice operation
- User replaceable V-grooves
- Graphical User Interface with 5.0" Touchscreen
- Multi-function transit case with integrated workstation
Applications
- Data Center cable installation
- High fiber count metro and campus networks
- Long-haul network installs and repairs
- Trunk cable repair with Splice-on MPOs
- Ribbon splicing high-density cables with 200 μm loose fiber
The Fujikura 100R mass fusion splicer introduces Intelligent Alignment Control to deliver more reliable, uniform splices by automatically correcting fiber placement, end‑face gaps, and axis alignment across all fibers.
Intelligent Alignment Control in the 100R enhances splice reliability by automatically correcting improper fiber seating, minimizing end-face gap variation, and stabilizing fiber-axis alignment across all fibers. Adjustable control levels allow the system to balance precision and cycle time, ensuring the best splice results across broadband or hyperscale applications.
Auto Placement Correction automatically detects and corrects fibers that are improperly seated in the V‑groove prior to fusion. By automatically lifting the clamp and adjusting the Z‑stage as needed, the system ensures proper fiber placement, reducing splice variability, and minimizing manual intervention.
Gap Alignment Correction automatically reduces variation in endface gaps across fibers prior to fusion. By continuously adjusting alignment until the target range is met, the 100R improves splice uniformity and consistency while completing the correction in as little as one second.
Axis Offset Correction reduces fiber axis position offsets across all fibers prior to fusion. By performing controlled, automatic alignment adjustments, the 100R improves splice uniformity and consistency while applying corrections only as needed to maintain efficient cycle times.
With the Fujikura 100R, you can keep your splicer in the field longer thanks to the included, field-replaceable V-grooves. With the AFL Tote Solution installed, the 100R transit case securely integrates with Milwaukee's PACKOUT™ system, offering faster transport, stability, and time savings for contractors and technicians.
Put our 100R to the test by contacting us to see its capabilities first-hand,
1-800-235-3423.
Fujikura 90R Fusion Splicer | AFL,Fujikura 100S Fusion Splicer | AFL,Fujikura 45S Cladding Alignment Fusion Splicer | AFL