CCT Connector Cleaning Tips from AFL meet the cleaning needs of today's fiber networks. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fiber end-face polish geometry while trapping and absorbing contaminants. Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results. Sizes are available for all commonly used connectors.
36cff2093f61445c89791a9f7f4ae2f7
Australia: 1300 232 476 New Zealand: 09 927 7140 www.AFLglobal.com Test and Inspection 1 © 2002-2020, AFL, all rights reserved. 1622, Revision 2, 01.10.20 Specifications are subject to change without notice. CCT – Connector Cleaning Tips Features • Molded sintered polymer construction assures perfect bulkhead fit and consistent performance with each cleaning tip • No fibres, binders, adhesives or outgassing that may contaminate the connector • Traps and holds liquid and particle contaminants in an absorbent open cell matrix ranging from 10-25 microns • The elastic cleaning head enhances entrapment of particles and oils, while allow - ing the tip to conform to virtually any fibre end-face geometry (8 degree, domed polish, etc.) • Very absorbent • US and Foreign patents pending Tip Configurations • CCTS and CCTX series: cleaning tip is exposed for cleaning ferrule end-faces in alignment sleeves that are recessed within sockets or bulkhead adaptors. • CCTP series: cleaning tip is recessed in the “straw” for cleaning exposed ferrules and termini (jumpers). Fits 2.5 mm and smaller ferrules. Ordering Information Cleaning tips are available for most common commercial and Mil Spec ferrule sizes. PART NUMBER DESCRIPTION TUBE COLOUR STICKS QTY Connector Cleaning Tips - Double-ended CCTP-25-0900MZ For exposed 2.5 mm, 2.0 mm, 1.6 mm, 1.25 mm ferrules and termini (FC, SC, ST, LC, MU, etc., jumpers, male MIL T 29504/14 for MIL C 28876 and MIL T 29504/04 for MIL C38999) Yellow 20 CCTS-25-0900MZ For 2.5 mm ferrule in adapters or sockets (SC, FC, ST, etc. in adapters) Blue 40 CCTS-12-0900MZ For 1.25 mm ferrule in adapter or sockets (LC, MU, etc., in adapters) Green 40 CCTS-16-0900MZ For MT-RJ connectors and 2.0 mm and 1.6 mm termini in sockets (female MIL T 29504/15 for MIL C 28876 and MIL T 29504/05 for MIL C 38999, MT-RJ both jumpers and adapters) Orange 40 CCTX-MT-0900MZ For Biconic and MT ferrule connectors both jumpers and in adapters (Biconic, MTP, MPO, MPX, etc.) Pink 20 AFL is pleased to offer a unique technology in fibre connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, we are offering a molded cleaning tip that will trap contamination and wick cleaning solvents from bulkhead connectors. The cleaning tip is a molded, sintered polymer that is both porous and pliable conforming to virtually any fibre end-face polish geometry while trapping and absorbing contaminants.
Features:
- Quality construction with unlimited shelf life
- Molded sintered polymer construction assures perfect bulkhead fit and consistent performance
- Traps and holds liquid and particle contaminants in an absorbent open cell matrix ranging from 10-25 microns
- No fibres, binders, adhesives or outgassing that may contaminate the connector
- The elastic cleaning head enhances entrapment of particles and oils, while allowing the tip to conform to virtually any fibre end-face geometry (8 degree, domed polish, etc.)
Applications:
- Dual-head design permits wet and dry cleaning in one swab
- Available for cleaning ferrule end-faces in adapters / sockets or exposed ferrules / termini on jumpers
- Cleaning tips available for most common commercial and Mil Spec ferrule sizes
- Designed to work with AFL's FCC2, Fibre Connector Cleaner
CCT Connector Cleaning Tips from AFL meet the cleaning needs of today's fiber networks.
CCT Connector Cleaning Tips are a unique technology in fiber connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, CCTs are molded cleaning tips that trap contamination and wick cleaning solvents away from connector end-faces. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fiber end-face polish geometry while trapping and absorbing contaminants. Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results.
CCT Connector Cleaning Tips offered by AFL are intended for cleaning the ferrule end-faces in adapters and sockets, as well as the exposed ferrules and termini of jumpers. CCTs are available for most commercial and Military Specification ferrule sizes.
Cleaning Facts:
- Cleaning saves time and money!
- Dirty connectors cause a major percentage of fiber optic network failures
- Prevention is simple – clean connectors!
- Proper cleaning saves money by eliminating service calls caused by dirty connectors
- Proper cleaning extends the life of connects and reduces replacement costs
- Clean connectors maximize the performance of the network and reduce repair cost
Ordering Information
|
Size
(ferrule diameter)
|
Type
|
Part Number
|
Comments
|
|
2.5 mm
|
Pin
|
CCTP-25-0900
|
Examples: SC, ST, FC, etc.
|
|
2.5 mm
|
Socket
|
CCTS-25-0900
|
Examples: SC, ST, FC, etc.
|
|
2.0 mm
|
Pin
|
CCTP-25-0900
|
Mil T 29504/14 For Mil C 28876
|
|
2.0 mm
|
Socket
|
CCTS-16-0900
|
Mil T 29504/15 For Mil C 28876
|
|
1.6 mm
|
Pin
|
CCTP-25-0900
|
Mil T 29504/04 For Mil C 38999
|
|
1.6 mm
|
Socket
|
CCTS-16-0900
|
Mil T 29504/05 For Mil C 38999
|
|
1.25 mm
|
Pin
|
CCTP-25-0900
|
Examples: LC, MU
|
|
1.25 mm
|
Socket
|
CCTS-12-0900
|
Examples: LC, MU
|
|
MT ferrule
|
Pin
|
CCTX-MT-0900
|
Examples: MPO, MPX®
|
|
MT ferrule
|
Socket
|
CCTX-MT-0900
|
Examples: MPO, MPX®
|
FOCIS Lightning2 Multi-Fiber Optic Connector Inspection | AFL EMEA,CLETOP ACT Adapter Cleaning Sticks - Fiber Optic Cleaning | AFL,Cletop Optical Fiber Connector Cleaner | AFL,CLETOP Original Series Connector Cleaners - Fiber Optic Cleaning | AFL,CLETOP-S Series Optical Connector Cleaner | AFL,FCC2 Enhanced Fiber Connector Cleaner and Preparation Fluid 10 Oz Can - Fiber Optic Cleaning | AFL,FCC2 Enhanced Formula Connector Cleaner and Preparatio - Fiber Optic Cleaning | AFL,FCC3 Debris Destroyer Fiber Cleaning Pen - Fiber Optic Cleaning | AFL,FCP Field Portable Connector Cleaning Kits - Fiber Optic Cleaning | AFL,FCP1 Connector Cleaning Kits - Fiber Optic Cleaning | AFL,One-Click Cleaner Mini for Fiber Optic Connectors | AFL
2685