1 FIBER OPTIC CABLE HARDWARE Fiber Optic Cable Hardware © 2008, AFL, all rights reserved. PP-3-00005, Revision 8, 11.4.2022 Specifications are subject to change without notice. AFLglobal.com | 800.235.3423 Aluminum Bonding Wire The Bonding Wire is used in conjunction with our dead end and suspension clamps to provide a path to ground from the OPGW cable to the tower. Bonding Wires are available in multiple lengths, lug sizes, and terminal angle options. For more information on AFL’s bonding assembly product offerings, applications, and configurations, please review the “OPGW and OHGW Bonding Assembly Selection” technical white paper at https://learn.aflglobal.com/white-papers TERMINAL SELECTION CODE** HARDWARE SIZE MOUNT HOLE DIAMETER 38 3/8" 0.438 50 1/2" 0.531 62 5/8" 0.688 75 3/4" 0.812 NOTES : 1. Connectors to be pre-compressed onto cable at factory. 2. If assembly does not contain two hole diameter codes, one terminal is supplied, and dimension "E" references wire end. 3. ( * ) For additional lengths not found in chart, contact AFL. 4. (**) To order 45° angled terminal, add suffix ‘D’ to selection code. Example: (BWAL50DH/50D-36). Aluminum Bonding Wire Ordering Information BWAL Terminal Selection Code – Side Y – (Smaller End) YY Hardware H = Hardware Blank = No hardware H Terminal Angle Blank = 0 ° Bend D = 45 ° Bend Hardware H = Hardware Blank = No hardware H Length in Inches (See Chart) * LL / DIMENSION "E" ( length in inches ) * 24 36 40 60 68 Terminal Angle Blank = 0 ° Bend D = 45 ° Bend Terminal Selection Code – Side Z – (Larger End) ZZ FACTORY COMPRESSION SIDE Z 0.62 TYP 1.19 TYP 2.00 SIDE Y E APPROX. – SEE NOTE 2 COMPRESSION CONNECTOR 4/0 18 STR. COMPRESSED 1350 (EC) CABLE 0.31 TYP 45 ° SEE NOTE 5 FOR ORDERING INFO. © 2019, AFL, all rights reserved. PP-3-00844, Revision 2, 2.8.2021 Specifications are subject to change without notice. AFLglobal.com | 800.235.3423 2 Fiber Optic Cable Hardware Fiber Optic Cable Hardware Tinned Copper Flexible Braided Bonding Strap The Braided Bonding Strap is used in conjunction with our dead end and suspension clamps to provide a path to ground from the OPGW cable to the tower. Bonding straps are available in multiple lengths as shown in the table below. For more information on AFL’s bonding assembly product offerings, applications and configurations, please review the “OPGW and OHGW Bonding Assembly Selection” technical white paper at https://learn.aflglobal.com/white-papers . AFL NO. L (inches) BWCF50SNH100/50SN-60 60 BWCF50SNH100/50SN-48 48 BWCF50SNH100/50SN-36 36 BWCF50SNH100/50SN-24 24 Tinned Copper Flexible Braided Bonding Strap Ordering Information BWCF Terminal Hole for 1/2" Hardware 50SN Length in Inches (See Chart) * LL / 1" Bolt, Flat Washer, Split Washer NH100 Terminal Hole for 1/2" Hardware 50SN TINNED COPPER BRAID .12 UNCOMPRESSED 0.50" BRONZE HARDWARE 0.19 1.00 .12 1.25 COMPRESSED 0.63 1.75 0.88 ∅ 0.56 THRU TYP BOTH ENDS L" PURE COPPER TUBCU003 FERRULES (TIN PLATED)