CCT Connector Cleaning Tips

CCT Connector Cleaning Tips
Features:

Quality construction with unlimited shelf life

Molded sintered polymer construction assures perfect bulkhead fit and consistent performance

Traps and holds liquid and particle contaminants in an absorbent open cell matrix ranging from 10-25 microns

No fibers, binders, adhesives or outgassing that may contaminate the connector

The elastic cleaning head enhances entrapment of particles and oils, while allowing the tip to conform to virtually any fiber end-face geometry (8 degree, domed polish, etc.)
Applications:

Dual-head design permits wet and dry cleaning in one swab

Available for cleaning ferrule end-faces in adapters / sockets or exposed ferrules / termini on jumpers

Cleaning tips available for most common commercial and Mil Spec ferrule sizes

Designed to work with AFL's FCC2, Fibre Connector Cleaner

PRODUCT DESCRIPTION

CCT Connector Cleaning Tips from AFL meet the cleaning needs of today's fibre networks.

CCT Connector Cleaning Tips are a unique technology in fibre connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, CCTs are molded cleaning tips that trap contamination and wick cleaning solvents away from connector end-faces. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fibre end-face polish geometry while trapping and absorbing contaminants. Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results.

CCT Connector Cleaning Tips offered by AFL are intended for cleaning the ferrule end-faces in adapters and sockets, as well as the exposed ferrules and termini of jumpers. CCTs are available for most commercial and Military Specification ferrule sizes.

Cleaning Facts:

Cleaning saves time and money!
Dirty connectors cause a major percentage of fibre optic network failures
Prevention is simple – clean connectors!
Proper cleaning saves money by eliminating service calls caused by dirty connectors
Proper cleaning extends the life of connects and reduces replacement costs
Clean connectors maximise the performance of the network and reduce repair cost

Ordering Information

Size (ferrule diameter)	Type	Part Number	Comments
2.5 mm	Pin	CCTP-25-0900	Examples: SC, ST, FC, etc.
2.5 mm	Socket	CCTS-25-0900	Examples: SC, ST, FC, etc.
2.0 mm	Pin	CCTP-25-0900	Mil T 29504/14 For Mil C 28876
2.0 mm	Socket	CCTS-16-0900	Mil T 29504/15 For Mil C 28876
1.6 mm	Pin	CCTP-25-0900	Mil T 29504/04 For Mil C 38999
1.6 mm	Socket	CCTS-16-0900	Mil T 29504/05 For Mil C 38999
1.25 mm	Pin	CCTP-25-0900	Examples: LC, MU
1.25 mm	Socket	CCTS-12-0900	Examples: LC, MU
MT ferrule	Pin	CCTX-MT-0900	Examples: MPO, MPX®
MT ferrule	Socket	CCTX-MT-0900	Examples: MPO, MPX®