Verrillon® VSS200 High-Performance Erbium Doped Fibers from AFL are suited for EDFA applications in telecommunnications and sensing. This 980nm-pumped fiber has been widely deployed in the Optical Network worldwide.
da68871b594545af910234240c34c2c1
1 Specialty Optical Fiber © 2015, AFL, all rights reserved. PP-6-00020, Revision 2, 5.7.2020 Specifications are subject to change without notice. AFLglobal.com | 800.235.3423 Specifications PART NO. EDF-1-125 Description Erbium Doped Fiber PARAMETER VALUE Material Coating Dual UV Acrylate Geometry Clad Diameter (μm) 125 ± 1 Core/Clad Offset (μm) ≤ 0.3 Coat Diameter (μm) 250 ± 10 Optical Absorption @ 1550 nm (dB/m) 6.0 ± 1.0 Absorption @ 980 nm (dB/m) 4.2 ± 1.0 Cutoff Wavelength (nm) 920 ± 40 MFD 1 @ 1550 nm (μm) 5.5 ± 0.7 NA (nominal) 0.23 Attenuation @ 1200 nm (dB/m) ≤ 7.0 Proof Test Tensile Strength (kpsi) ≥ 200 1 Petermann II Definition Features • High numerical aperture design for low bend loss • Reduced noise figure • Excellent for use in EDFAs • Superior run-to-run consistency • Widely used in EDFAs by the telecom industry Applications • Telecommunications Optical Networks • Erbium-Doped Fiber Amplifiers (EDFAs) • Light sources • Signal amplification in sensing systems VSS200 Series Erbium Doped Fiber Verrillon Erbium Doped Fiber (EDF) from AFL is a high NA single-mode, highly doped with erbium and optimized for 980 nm pumping in erbium-doped fiber amplifiers (EDFA). The high erbium content in this fiber allows for high efficiency and short device length, while the high NA allows for tight bend radii in compact EDFA packaging. The VSS200-EDF Series has been widely incorporated in EDFAs in the telecommunications industry over the last two decades.
Features:
- High numerical aperture design for low bend loss
- Reduced noise figure
- Excellent for use in EDFAs
- Superior run-to-run consistency
Applications:
- Telecommunications Optical Networks
- Erbium-Doped Fiber Amplifiers (EDFAs)
- Light sources
- Signal amplification in sensing systems
Verrillon® Erbium Doped Fibers (EDF) from AFL is a high NA single-mode, highly doped with erbium and optimized for 980nm pumping in erbium-doped fiber amplifiers (EDFA). The high erbium content in this fiber allows for high efficiency and short device length, while the high NA allows for tight bend radii in compact EDFA packaging. The VSS200-EDF Series has been widely incorporated in EDFAs in the telecommunications industry over the last two decades.
175° Coating - Carbon/Silicone/Mid-Temp Acrylate Coating (CSMTA),VHM5000 Series Harsh Environment Fibers,VHT500 Single-mode Series,VHM7000 Series Fibers,VHM4000 Series Harsh Environment Fibers,VHM3000 Series Harsh Environment Fibers,VHM2000 Series Harsh Environment Fibers,VHS700 Series Harsh Environment Fibers,VHS500 Series Harsh Environment Fibers,VHS100 Series Harsh Environment Fibers,VHT5000 Multimode Series,Medical Sensing Fibers,Near-Infrared (NIR) Medical Laser Delivery Fibers,UV-Visible (UV-Vis) Medical Laser Delivery Fibers
1711