CCT Connector Cleaning Tips

CCT Connector Cleaning Tips

Features:

  • Quality construction with unlimited shelf life
  • Molded sintered polymer construction assures perfect bulkhead fit and consistent performance
  • Traps and holds liquid and particle contaminants in an absorbent open cell matrix ranging from 10-25 microns
  • No fibres, binders, adhesives or outgassing that may contaminate the connector
  • The elastic cleaning head enhances entrapment of particles and oils, while allowing the tip to conform to virtually any fibre end-face geometry (8 degree, domed polish, etc.)

Applications:

  • Dual-head design permits wet and dry cleaning in one swab
  • Available for cleaning ferrule end-faces in adapters / sockets or exposed ferrules / termini on jumpers
  • Cleaning tips available for most common commercial and Mil Spec ferrule sizes
  • Designed to work with AFL's FCC2, Fibre Connector Cleaner
PRODUCT DESCRIPTION

CCT Connector Cleaning Tips from AFL meet the cleaning needs of today's fibre networks.

CCT Connector Cleaning Tips are a unique technology in fibre connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, CCTs are molded cleaning tips that trap contamination and wick cleaning solvents away from connector end-faces. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fibre end-face polish geometry while trapping and absorbing contaminants. Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results.
 
CCT Connector Cleaning Tips offered by AFL are intended for cleaning the ferrule end-faces in adapters and sockets, as well as the exposed ferrules and termini of jumpers. CCTs are available for most commercial and Military Specification ferrule sizes.

 

Cleaning Facts:

  • Cleaning saves time and money!
  • Dirty connectors cause a major percentage of fibre optic network failures
  • Prevention is simple – clean connectors!
  • Proper cleaning saves money by eliminating service calls caused by dirty connectors
  • Proper cleaning extends the life of connects and reduces replacement costs
  • Clean connectors maximise the performance of the network and reduce repair cost
 

Ordering Information

Size
(ferrule diameter)
Type
Part Number
Comments
2.5 mm
Pin
CCTP-25-0900
Examples: SC, ST, FC, etc.
2.5 mm
Socket
CCTS-25-0900
Examples: SC, ST, FC, etc.
2.0 mm
Pin
CCTP-25-0900
Mil T 29504/14 For Mil C 28876
2.0 mm
Socket
CCTS-16-0900
Mil T 29504/15 For Mil C 28876
1.6 mm
Pin
CCTP-25-0900
Mil T 29504/04 For Mil C 38999
1.6 mm
Socket
CCTS-16-0900
Mil T 29504/05 For Mil C 38999
1.25 mm
Pin
CCTP-25-0900
Examples: LC, MU
1.25 mm
Socket
CCTS-12-0900
Examples: LC, MU
MT ferrule
Pin
CCTX-MT-0900
Examples: MPO, MPX®
MT ferrule
Socket
CCTX-MT-0900
Examples: MPO, MPX®
GET IN TOUCH AND REQUEST A QUOTE.

Contact Us

I have read and accepted the AFL Privacy Policy.
How would you prefer to be contacted?