The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs.
e990f6cb2c5c415792cae837c8a72223,de002252e39640519d4a8c663f67be99
1 © 2024, AFL, all rights reserved. PP-3-00051, Revision 14, 10.29.2026 S p e c i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . 1 Fiber Optic Cable Accessories AFLglobal.com/contact Sales & Support The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs. Its unique and flexible design was created with the "real-world" technician in mind. The Opti-Guard combines optimized system performance with unparalleled ease of use. It is resistant to water, ultraviolet rays, temperature and ballistics. Opti-Guard installs easily without messy tapes or adhesives. It provides the flexibility needed to handle the most demanding installation scenarios. Opti-Guard Splice Enclosure Ordering Information Description AFL No. OG03 Opti-Guard Splice Enclosure without Splice Trays or Cable Connectors. Accommodates up to 7 OGST02 splice trays when used with the ASTROGUARD hardware system. OG03 OGST02 Splice Tray OGST02 Retro-fit hardware kit (includes brackets, screws, blue velcro strap, and foam blocks) AGHWK 40 mm Splice Protection Sleeve (10 Per Pack) SPS40 60 mm Splice Protection Sleeve (10 Per Pack) SPS60 60 mm Slim Splice Protection Sleeve S018263 40 mm Slim Splice Protection Sleeve S018262 NOTE: Refer to page on Connector Kit for AFL number set-up. Features • Accommodates up to 168 single fusion splices using standard splice sleeves and 672 single fusion splices using slim splice sleeves • Craft friendly design requires no specialized tools to install and minimizes required training • Easy to maintain and re-enter; no re-entry kit required • Unit is lightweight and mounts to many types of structures • May be bolted or banded; no special adapters needed • Specially designed non-metallic housing • Environmentally sealed to protect fibers • Accepts up to six individual cables • Accommodates most cable types in most environments • Versatile cable tie-off system resists up to 100 pounds of tension per cable continued
2 © 2024, AFL, all rights reserved. PP-3-00051, Revision 14, 10.29.2026 S p e c i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . 2 Fiber Optic Cable Accessories AFLglobal.com/contact Sales & Support continued 1.25” (31.8 MM) MAX. BAND WIDTH OPTIONAL BAND MOUNTING PRESSURIZING VALVE 9.00” (31.8 MM) TWO 5/8” BOLTS ON 35.75” (908 MM) CENTERS 38.00” (965MM) 40.00” (1,016 MM) APPROX. 12.50” (318 MM) 14.69” (373 MM) Opti-Guard Splice Enclosure CONNECTOR KITS DRAWER CASING PROTECTIVE DRAWER COVER (SOLD SEPARATELY) Exploded View Mounting Details and Options
3 © 2024, AFL, all rights reserved. PP-3-00051, Revision 14, 10.29.2026 S p e c i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . 3 Fiber Optic Cable Accessories AFLglobal.com/contact Sales & Support Connector Kits for Opti-Guard Splice Enclosures— OPGW Cable Optical Ground Wire Connector Kit OPGW Connector Kit Cable Type SLCK = Slotted Core SCK = MiniCore, HexaCore or PentaCore APCK = CentraCore, AlumaCore Ordering Example: For 0.571" diameter SX-67/49/571, which has a layer 1 total diameter of 0.358", the AFL number is SCKB569/583. SLCK Y XXX/XXX Connector Kit: Optical Ground Wire Range Code in Decimal Inches (see Table 1) Range Code in Decimal Inches (see Table 2) Table 2 Range Code Cable Diameter Range Min. Max. 225/240 .225 .240 241/255 .241 .255 256/271 .256 .271 272/286 .272 .286 287/302 .287 .302 303/318 .303 .318 319/333 .319 .333 334/349 .334 .349 350/365 .350 .365 366/380 .366 .380 381/396 .381 .396 397/412 .397 .412 413/427 .413 .427 428/443 .428 .443 444/459 .444 .459 460/474 .460 .474 475/490 .475 .490 Range Code Cable Diameter Range Min. Max. 491/506 .491 .506 507/521 .507 .521 522/537 .522 .537 538/553 .538 .553 554/568 .554 .568 569/583 .569 .583 584/599 .584 .599 600/615 .600 .615 616/630 .616 .630 631/646 .631 .646 647/662 .647 .662 663/677 .663 .677 678/693 .678 .693 694/708 .694 .708 709/727 .709 .727 728/740 .728 .740 Range Code Cable Diameter Range Min. Max. 741/756 0.741 0.756 757/771 0.757 0.771 772/787 0.772 0.787 788/803 0.788 0.803 804/818 0.804 0.818 819/829 0.819 0.829 830/849 0.830 0.849 850/865 0.850 0.865 866/881 0.866 0.881 882/894 0.882 0.894 895/910 0.895 0.910 911/926 0.911 0.926 927/937 0.927 0.937 938/950 0.938 0.950 951/964 0.951 0.964 965/979 0.965 0.979 Table 1 Range Code Slotted Core Diameter Minicore, Hexacore Or Pentacore Layer 1 Diameter Centracore Or Alumacore Pipe Diameter A .185 - .227 .000 - .230 .185 - .227 B .228 - .264 .231 - .500 .228 - .264 C .265 - .300 .501 - .636 .265 - .300 D .301 - .374 — .301 - .374 E .375 - .479 — .375 - .479 F .480 - .550 — .480 - .550 G .551 - .630 — .551 - .630 H .631 - .700 — .631 - .700
4 © 2024, AFL, all rights reserved. PP-3-00051, Revision 14, 10.29.2026 S p e c i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . 4 Fiber Optic Cable Accessories AFLglobal.com/contact Sales & Support Connector Kits for Opti-Guard Splice Enclosures— Black Jacket Cable Table 1 Range Code Cable Diameter Range Min. Max. 225/240 .225 .240 241/255 .241 .255 256/271 .256 .271 272/286 .272 .286 287/302 .287 .302 303/318 .303 .318 319/333 .319 .333 334/349 .334 .349 350/365 .350 .365 366/380 .366 .380 381/396 .381 .396 397/412 .397 .412 413/427 .413 .427 428/443 .428 .443 444/459 .444 .459 460/474 .460 .474 475/490 .475 .490 Range Code Cable Diameter Range Min. Max. 491/506 .491 .506 507/521 .507 .521 522/537 .522 .537 538/553 .538 .553 554/568 .554 .568 569/583 .569 .583 584/599 .584 .599 600/615 .600 .615 616/630 .616 .630 631/646 .631 .646 647/662 .647 .662 663/677 .663 .677 678/693 .678 .693 694/708 .694 .708 709/727 .709 .727 728/740 .728 .740 Armored Loose Tube Connector Kit All-Dielectric Self-Supporting Connector Kit Black Jacket Cable Connector Kit Ordering Example: For 0.528" diameter ADSS, the AFL number is BCK522/537. BCK XXX/XXX Connector Kit: All-Dielectric Self-Supporting Fiber Optic Cable Range Code in Decimal Inches (see Table 1 below) F Blank = No Additional Connector Assembly Required F = 1 " Flex Conduit Connector Required Ordering Example: For 0.510" armored loose tube (duct) cable with flexible conduit and armor ground connections, the AFL number is BCK507/521B. Connector Kit: Loose Tube Fiber Optic Cable Black Jacket Cable Connector Kit BCK XXX/XXX Range Code in Decimal Inches (see Table 1 below) B Options Blank = No Additional Connector Assembly Required F = 1" Flexible Conduit Connector Required A = Armor Ground Assembly Required B = Armor Ground Assembly and 1" Flexible Conduit Connector Required Range Code Cable Diameter Range Min. Max. 741/756 0.741 0.756 757/771 0.757 0.771 772/787 0.772 0.787 788/803 0.788 0.803 804/818 0.804 0.818 819/829 0.819 0.829 830/849 0.830 0.849 850/865 0.850 0.865 866/881 0.866 0.881 882/894 0.882 0.894 895/910 0.895 0.910 911/926 0.911 0.926 927/937 0.927 0.937 938/950 0.938 0.950 951/964 0.951 0.964 965/979 0.965 0.979
5 © 2024, AFL, all rights reserved. PP-3-00051, Revision 14, 10.29.2026 S p e c i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . 5 Fiber Optic Cable Accessories AFLglobal.com/contact Sales & Support The OGST02 splice tray is the new standard splice tray for the Opti-Guard OG03 enclosure. The tray utilizes four modular splice holders and supports multiple splice configurations. Splice capacity varies depending on splice type, splice protection sleeve, fiber type, and whether splices are single- or double-stacked. The OG03 accommodates up to seven OGST02 splice trays when used with the ASTROGUARD hardware system. Tray dimensions: approximately 12.120 in. x 5.183 in. x 0.740 in. NOTES • New-production vs. retrofit: ASTROGUARD tray-retention hardware is standard in newly manufactured OG03 enclosures. Existing OG03 enclosures can be upgraded using the AGHWK retrofit hardware kit. This makes it immediately clear that someone buying a new OG03 does not also need to order AGHWK. • Retrofit compatibility: The AGHWK retro-fit hardware kit allows existing OG03 enclosures to use the new OGST02 trays—up to 24 trays using standard sleeves and up to 96 trays using slim sleeves. Opti-Guard Splice Tray – OGST02 ASTROGUARD Hardware System ASTROGUARD Hardware Kit includes: 2 brackets, 3 screws, Velcro ® straps, and foam pads. ASTROGUARD Hardware Kit installed in empty Opti-Guard OG03 Enclosure. The ASTROGUARD tray-retention hardware is standard in newly manufactured Opti-Guard OG03 Enclosures. Existing OG03 enclosures can be upgraded using the AGHWK retrofit hardware kit. Ordering Information Model AFL No. ASTROGUARD Retrofit Hardware Kit AGHWK Ordering Information Model AFL No. OGST02 Splice Tray OGST02 40 mm Splice Protection Sleeve (10 Per Pack) SPS40 60 mm Splice Protection Sleeve (10 Per Pack) SPS60 60 mm Slim Splice Protection Sleeve S018263 40 mm Slim Splice Protection Sleeve S018262 Features • Can be retrofitted onto existing installations without disturbing cables • Only a standard flat-blade screwdriver required for installation OGST02 Splice Tray
6 © 2024, AFL, all rights reserved. PP-3-00051, Revision 14, 10.29.2026 S p e c i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . 6 Fiber Optic Cable Accessories AFLglobal.com/contact Sales & Support Opti-Guard Bullet Guard Opti-Guard Fiber Routing Kit Opti-Guard Bullet Guard Opti-Guard Fiber Routing Kit The Opti-Guard Bullet Guard is designed to supplement the ballistic resistance of the Opti-Guard Splice Enclosure. The Opti-Guard Fiber Routing Kit provides all of the materials to properly route fibers from a stainless steel tube to the OGST01-72 splice tray inside the Opti-Guard splice enclosure. Ordering Information Model AFL No. Opti-Guard Bullet Guard OGBGS-01 Ordering Information Model AFL No. Opti-Guard Fiber Routing Kit OGFK01 NOTE: Order one kit for each stainless steel tube. Features • Can be retrofitted onto existing installations without disturbing cables • Only a standard flat-blade screwdriver required for installation Features • Primary transition tubing leads fiber from stainless steel tube to splice tray • Heat Shrink tubing guides fibers as they exit the stainless steel tube • Cable ties provided to secure tubing to the tray and the end of the stainless steel tube
Features:
- Accommodates up to 672 single fusion splices
- Craft-friendly design requires no specialized tools to install and minimizes required training
- Easy to maintain and re-enter; no re-entry kit required
- Lightweight and mounts to many types of structures
- May be bolted or banded; no special adapters needed
- Specially-designed non-metallic housing
- Environmentally sealed to protect fibers
- Accepts up to six individual cables
- Accommodates most cable types in most environments
- Versatile cable tie-off system resists up to 100 pounds of tension per cable
Formed Wire Dead End for ADSS Cable | AFL,ADSS Wedge Dead End Conductor Accessories | AFL,ADSS Mini Dead Ends Conductor Accessories | AFL,ADSS Trunnion Assemblies | AFL,Fdct Series Flat Drop Cable Tangentdownlead – FDCT Series Flat Drop Cable | AFL,RDCT Series Round Drop TangentDownlead | AFL,ADSS Suspension Unit Conductor Accessories | AFL,ADSS Temporary Grip Conductor Accessories | AFL,AFL FIT Formed Wire Installation Tool | AFL,AGC Series ADSS Downlead Clamp | AFL,AVD Series Spiral Vibration Dampers | AFL,Corona Ring for ADSS Cable | AFL,Downlead Clamp For ADSS Conductor Accessories | AFL,Fiber Storage Units for ADSS Fiber Optic Cable - ADSS Hardware | AFL,Formed Wire Suspension for ADSS Cable | AFL
764