© 2010, AFL, all rights reserved. PP-2-00062, Revision 7, 6.24.2020 Specifications are subject to change without notice. AFLglobal.com | 800.235.3423 1 Optical Connectivity Optical Connectivity continued LightLink 580 Optical Splicing and Distribution Enclosure The LightLink (LL) 580 Optical Splicing and Distribution Enclosure provides for organizing, splicing and interconnecting fibers in broadband, distribution and building entrance applications. The splice tray panel is equipped with LGX ® 118 footprint snaps so various types of connectors may be installed. The enclosure features a scratch resistant powder coated base and a fully gasketed hinged cover. The cover was designed so that it may be installed on either side of the enclosure where there are space restrictions. The internal interconnect tray and back-plate may be removed from the enclosure and brought to a splicing table to complete splicing, fiber routing and fiber management. The cable entry base has four interchangeable configurations to allow the installation of cable through a grommet system, or through pre-installed conduit couplings. Features Enclosure • Independent cable strain-relief for flat drop cable and 2 mm/3 mm drops • Unique self-sealing grommet system • Self-contained inner chassis frame with separate outer housing • Dual telco can-wrench locking fasteners • Hinged cover securable with standard padlock • Internal, owner-accessible security screw • Available with a variety of connector types and cable entrance choices Specifications PARAMETER VALUE Material – Housing 16 Gauge Aluminum Coating Electrostatically applied powder paint Color Beige Size (H x W x D in.) 27.5" x 13.0" x 5.625" (total length: 33.5" L x 13") Weight (lbs) 15.2 Adapters (72) SC or (72) LC Duplex Splice (2) LL-7644 up to 120 single fused fibers or 24 mass fusion sleeves (2) LL-4808 L-R up to 72 single fused fibers or 24 mass fusion sleeves Interconnect Splice Tray Kit • Included: (2) Factory Pre-installed LL-7644 Universal Splice Tray with SC-UPC 900 μm pigtails for up to 72 connections. LC-UPC Duplex adapters may be installed for up to 144 LC connections with mass fusion. • Interconnect Tray may be purchased with either SC-UPC adapters and pigtails preinstalled or LC-UPC Duplex adapters and pigtails pre-installed. © 2010, AFL, all rights reserved. PP-2-00062, Revision 7, 6.24.2020 Specifications are subject to change without notice. AFLglobal.com | 800.235.3423 2 Optical Connectivity Optical Connectivity LightLink 580 Optical Splicing and Distribution Enclosure Ordering Information DESCRIPTION AFL NO. LL-580 Enclosure Base (No Bottom Plate or LGX ® Tray) FM002814 Interconnect Trays Kit, Splice/4x LGX ® Interconnect Tray, with (2) LL-7644 Trays FM002858-001 Kit, Splice/4x LGX ® Interconnect Tray, 24 SCU, with (2) LL-7644 Trays FM002858-SCU Kit, Splice/4x LGX ® Interconnect Tray, 24 SCA, with (2) LL-7644 Trays FM002858-SCA Kit, Splice/4x LGX ® Interconnect Tray, 24 LCU, with (2) LL-7644 Trays FM002858-LCU Splice Trays LL-7644 Splice Tray used with LGX ® Interconnect Tray FA000044 LL-4808 L-R Splice Tray used with LGX ® Interconnect Tray FA000037 Plate Kits Plate Kit (2 – 2 in. NPT and 2 – 1 in. KO) FM002653 Plate Kit (2 – Single Cable Grommets [L&R] and 2 – Multiport Grommets [Center]) FM001937 Plate Kit (2 – Single Cable Grommets [L&R]) FM003014 Plate Kit (1 – 2 in. NPT and 4 – 1 in. NPT) FM001959 Plate Kit (3 – KO) FM003023 Grommet and NPT Kits 1 in. NPT Kit (2 – 1 in NPT Fittings and cable hardware to be used with FM002653) FM003015 2 in. NPT Kit (2 – 2 in NPT Fittings and cable hardware to be used with FM003023) FM003016 Dual Cable Grommet Kit (2/kit) 911386-00-01 Accessories Conduit Skirt FM002895 Pre-configured Base Enclosures and Interconnect Tray LL-580, 24F SC/UPC Interconnect Kit, 24F SC/UPC Pigtail Kit, (2) LL-7644 Splice Trays, No Bottom Plate FM003248 LL-580, 48F SC/UPC Interconnect Kit, 48F SC/UPC Pigtail Kit, (2) LL-7644 Splice Trays, No Bottom Plate FM003249 LL-580, 72F SC/UPC Interconnect Kit, 72F SC/UPC Pigtail Kit, (2) LL-7644 Splice Trays, No Bottom Plate FM003250 LL-580, Interconnect Kit, No Adapter Plates, No Pigtail Kit, (2) LL-7644 Splice Trays, No Bottom Plate FM003251 LL-580 Enclosure shown with the Cable Grommet Bottom Plate installed Cable NPT Bottom Plate with one 2" and four 1" fittings Cable NPT Bottom Plate with two 2" fittings (can be used in the top and/or bottom position) Blank Bottom Plate (can be used in the top and/or bottom position) Contact AFL for further details. Qualifications GOVERNING BODY STANDARD CODE NEMA Type 3 Telcordia GR-2898