El OFI-200 es un instrumento de prueba de fibra óptica robusto, portátil y fácil de usar, diseñado para detectar señales ópticas transmitidas a través de una fibra monomodo sin interrumpir el tráfico en esa fibra. Permite al personal técnico identificar inequívocamente una fibra específica y elimina el riesgo de interrupción accidental del servicio de ingresos.
7db133c140db4a06926cbf3be99a64c0
1 Test & Inspection AFLglobal.com | 800.235.3423 Fiber Identification OFI-200 Optical Fiber Identifier ©2020, AFL, all rights reserved. OFI1-11-2000 Revision EC, 2020-11-19 Specifications are subject to change without notice. Features • 5-year product warranty; 3-year recommended calibration interval • Rugged, hand-held, lightweight, and easy-to-use • Unique optical head with two-position plunger for use with all fiber types • Visually and audibly indicates tone signal across 2 kHz range Applications • Live fiber identification to avoid technician-induced service outages • Fiber tracing or identification with CW or test tones • Testing 250 μm, 900 μm coated, 2 mm, 3 mm jacketed, and ribbon fiber AFL Optical Fiber Identifiers are rugged, hand-held, and easy-to-use fiber optic test instruments designed to detect optical signals transmitted through a single-mode fiber without disrupting traffic. The OFI-200 is simply clamped onto a fiber and indicates if there is NO SIGNAL, TONE, or TRAFFIC and the associated signal direction. This permits network personnel to easily and quickly identify a specific fiber without the risk of disrupting service. When testing coated fibers, the slim design of the OFI-200 allows easier access on a splice tray where the amount of workspace is limited. No adapters to purchase, store, swap, or misplace: The OFI-200 uses a unique optical head design featuring a two-position plunger that enables it to be used with 250 μm, 900 μm, and ribbon fiber or 2 mm and 3 mm jacketed fiber. Other brands of optical fiber identifiers require users to purchase, store, and change optical plungers each time a different type of fiber is tested. Low insertion loss for in-service ID tasks: The OFI-200 optical head induces a safe, repeatable macro-bend to the fiber that allows a small amount of light to escape for analysis. The insertion loss induced by the macro-bend is too small to affect the signal on the fiber and the integrity of the fiber is unaffected by the measurement process. Designed for the real world: The OFI-200 is a simple, easy-to-use tool that features rugged, drop-proof construction perfect for inside or outside plant use. Its ergonomically designed macro-bend trigger is comfortable to use and the integrated, backlit LCD display enables it to be used in dimly lit spaces. The OFI-200 uses readily available 1.5 V AAA batteries, which power thousands of fiber tests before needing to be replaced.
2 Test & Inspection AFLglobal.com | 800.235.3423 Fiber Identification OFI-200 Optical Fiber Identifier ©2020, AFL, all rights reserved. OFI1-11-2000 Revision EC, 2020-11-19 Specifications are subject to change without notice. Notes: a. All specifications stated above are as measured at 25°C. b. 250 μm coated fiber parameters are specified with OFI plunger in the “250/900/RIB” position. 2 mm/ 3 mm jacketed fiber parameters are specified with OFI plunger in the “2 mm /3 mm” position. c. CW is a light signal that is not modulated. Traffic is a light signal modulated by a random data sequence. Tone is a light signal modulated into a nominal 50% duty cycle square wave. d. Unless noted otherwise, all specifications are typical. Actual results can vary by several dB depending on fiber type, coating material, jacket color, jacket hardness, and other factors. Specifications a DETECTABLE SIGNAL RANGE FIBER TYPE b PARAMETER TEST CONDITIONS c OFI-200D 250 μm coated fiber (SMF-28 with 250 μm CPC6 coating) Minimum level detected, average power 1310 nm, CW or Traffic 1310 nm, Tone 1550 nm, CW or Traffic 1550 nm, Tone -40 dBm -43 dBm -45 dBm -50 dBm Insertion loss (typical) 1310 nm 1550 nm 0.6 dB 2.5 dB 3 mm jacketed fiber (SMF-28 with 250 μm CPC6 coating and 3 mm, yellow jacket) Minimum level detected, average power 1310 nm, CW or Traffic 1310 nm, Tone 1550 nm, CW or Traffic 1550 nm, Tone -30 dBm -32 dBm -33 dBm -37 dBm Insertion loss (typical) 1310 nm 1550 nm 0.8 dB 2.5 dB OPTICAL SPECIFICATIONS d Detector Type InGaAs Wavelength Range 800 - 1700 nm Calibrated Size of Fiber and Wavelength N/A Fiber Stress <100 kPSI max Fiber Size 250 μm, 900 μm, ribbon, 2 mm or 3 mm and jacketed fiber Tone Detection 2000 ±100 Hz GENERAL SPECIFICATIONS Display Type N/A Power 1 9-Volt Alkaline Battery Life >10,000 operations typical Operation Temperature 0°C to 50°C 90 % RH (Non-condensing) Storage Temperature -30°C to +60°C 90 % RH (Non-condensing) Dimensions (H x W x D) 22 x 3.8 x 2.8 cm (8.5 x 1.5 x 1.1 in) Weight 210 g (7.5 oz)
3 Test & Inspection AFLglobal.com | 800.235.3423 Fiber Identification OFI-200 Optical Fiber Identifier ©2020, AFL, all rights reserved. OFI1-11-2000 Revision EC, 2020-11-19 Specifications are subject to change without notice. Qualificati ons CATEGORY REGULATION/STANDARD QUALIFICATION CE Marking EU Compliant to relevant EU Directives on health, safety, and environmental protection, and certified with CE marking Safety /EMC /EMI IEC Compliant to IEC 61010-1 for safety requirements for electrical equipment EN Compliant to EN 61010-1 for safety requirements for electrical equipment IEC Compliant to IEC 61326-1 for EMC requirements for electrical equipment EN Compliant to EN 61326-1 for EMC requirements for electrical equipment EN Compliant to EN 55011 for EMC requirements for industrial, scientific and medical equipment RoHS EU Compliant to EU regulations Directive 2011/65/EU (RoHS 2) and Directive 2015/863 (RoHS 3) Contact Sales@AFLglobal.com to schedule a demonstration or learn how to buy. Visit www.AFLglobal.com/Test to learn more about Optical Fiber Identifiers. International Sales and Service Contact Information available at www.AFLglobal.com/Test/Contacts Recommended Products FlexScan ® FS300 (quad) and FS200 (single-mode) OTDRs • SmartAuto ® 1-button automated testing for fast results • LinkMap ® color-coded icons for easy troubleshooting • FleXpress ® mode (FS200) completes OTDR test in <5 seconds! • Integrated Source, Power Meter and VFL Optical Light Sources • Encircled Flux Compliant • 5-Year Product Warranty • Integrated LED and Laser light sources FS200 FS300 OLS4 OLS2-Dual Ordering Information INCLUDES AFL NO. Users guide and carry case OFI-200D
Características:
- Cabezal óptico único con émbolo de 2 posiciones para su uso con muchos tipos de fibra
- Detecta el tráfico, la onda continua y los tonos de 270, 330, 1000 y 2000 Hz
- Indica la dirección de las transmisiones
- Garantía de producto de 5 años
Aplicaciones:
- Identificación de fibra en vivo para evitar cortes de servicio inducidos por técnicos
- Rastreo o identificación de la fibra con tonos CW o de prueba
Identificador de fibra óptica OFI-200
Instrumento de prueba de fibra óptica robusto, portátil y fácil de usar, diseñado para detectar las señales ópticas transmitidas a través de una fibra monomodo sin interrumpir el tráfico en esa fibra. Durante la instalación, el mantenimiento, el redireccionamiento o la restauración, a menudo es necesario aislar una fibra específica. Con sólo sujetar un identificador de fibra óptica en una fibra, la unidad indicará si hay SIN SEÑAL, TONO o TRÁFICO y la dirección de la señal asociada. Permite al personal técnico identificar inequívocamente una fibra específica y elimina el riesgo de interrupción accidental del servicio de ingresos. Las fuentes de luz ópticas AFL OLS7, OLS2, CSS1-SM y CSS1-MM son compañeros ideales para el OFI-200.
El OFI-200 está equipado con un diseño único de cabezal de dos posiciones que puede configurarse, sin herramientas ni recalibración, para trabajar con 250 µm, 900 µm, cinta o fibra encamisada. El diseño delgado del cabezal es especialmente valioso cuando se trabaja en bandejas de empalme, armarios y pedestales donde el espacio de trabajo es limitado.
El gatillo de sujeción está diseñado ergonómicamente para adaptarse al movimiento natural de la mano del usuario'
. Un estuche de plástico moldeado de alto impacto hace que el OFI-200 sea adecuado para su uso en tareas de planta interior o exterior.
El identificador de fibra óptica OFI-200 funciona con pilas y, gracias a una capacidad de alimentación automática que maximiza la duración de las pilas, puede realizar miles de pruebas antes de necesitar la sustitución de las pilas .
También se proporciona un indicador de batería baja .
Identificadores de fibra ptica OFI BIPM y OFI BIPMe | AFL Global Mexico,Identificador de fibra ptica de la serie OFI 400 | AFL Global Mexico,VFI4 Identificador visual de fallos | AFL Global Mexico,MT Tracer 12Fiber VFL y pantalla | AFL Global Mexico,Sistema de Identificación Multifibra (MFIS) | AFL Global México
469
