Features • Intelligent Alignment Controls for hands-free alignment • Auto Placement Correction for proper fiber seating • Gap Alignment Correction for uniform endface gaps • Axis Offset Correction for consistent fiber alignment • Cleaver tracking and upkeep with wireless communication • Automated wind protector, tube heater and splice operation • User replaceable V-grooves • Graphical User Interface with 5.0" Touchscreen • Multi-function transit case with integrated workstation Applications • Data Center cable installation • High fiber count metro and campus networks • Long-haul network installs and repairs • Trunk cable repair with Splice-on MPOs • Ribbon splicing high-density cables with 200 μm loose fiber Fujikura 100R Fusion Splicer The Fujikura 100R mass fusion splicer introduces Intelligent Alignment Control to deliver more reliable, uniform splices by automatically correcting fiber placement, end - face gaps, and axis alignment across all fibers. Intelligent Alignment Control in the 100R enhances splice reliability by automatically correcting improper fiber seating, minimizing end-face gap variation, and stabilizing fiber-axis alignment across all fibers. Adjustable control levels allow the system to balance precision and cycle time, ensuring the best splice results across broadband or hyperscale applications. Auto Placement Correction automatically detects and corrects fibers that are improperly seated in the V - groove prior to fusion. By automatically lifting the clamp and adjusting the Z - stage as needed, the system ensures proper fiber placement, reducing splice variability, and minimizing manual intervention. Gap Alignment Correction automatically reduces variation in endface gaps across fibers prior to fusion. By continuously adjusting alignment until the target range is met, the 100R improves splice uniformity and consistency while completing the correction in as little as one second. Axis Offset Correction reduces fiber axis position offsets across all fibers prior to fusion. By performing controlled, automatic alignment adjustments, the 100R improves splice uniformity and consistency while applying corrections only as needed to maintain efficient cycle times. With the Fujikura 100R, you can keep your splicer in the field longer thanks to the included, field-replaceable V-grooves. With the AFL Tote Solution installed, the 100R transit case securely integrates with Milwaukee's PACKOUT ™ system, offering faster transport, stability, and time savings for contractors and technicians. Put our 100R to the test by contacting us to see its capabilities first-hand, 1-800-235-3423. 1 AFLglobal.com 1 (800) 235-3423 © 2026, AFL, all rights reserved. PP-4-00140, Revision 1, 5.11.2026 Specifications are subject to change without notice. Fusion Splicing Systems 1 Fujikura 100R Fusion Splicer Ordering Information Description AFL No. Fujikura 100R SpliceReady Splicer Kit Includes: Fujikura 100R Standard Kit (S018665), FP-05 40 mm protection sleeve, Splicer V-groove cleaning kit, FH-80-12PC 200 to 250um Pitch Conversion Fiber Holder, AFL WFW wipes mini tub (90 wipes), FCC2 fiber cleaning fluid (3 oz.), RT-02 Ribbonizing tool S018713 Fujikura 100R with 200 μ m Accessories SpliceReady Kit Includes: Fujikura 100R Standard Kit (S018665), FP-05 40 mm protection sleeve, VG12-02-200 200 μm V-groove, FH-80-16PC 200 to 250 μ m Pitch Conversion Fiber Holder, FH-80-12-200 fiber holders, RT-02 Ribbonizing tool, Splicer V-groove cleaning kit, FCC2 fiber cleaning fluid (3 oz.), AFL WFW wipes mini tub (90 wipes) S018714 Fujikura 100R Fusion Splicer Kit with CT60 and RS03 Includes: BTR-19 Battery, ADC-22 AC Adapter, ACC-19 AC Cord, CT60 Cleaver, RS03 Stripper with internal BTR-12A battery, ADC-09A AC Adapter with ACC-09 cord, ELCT2-16C Spare Electrodes (pair) with spare V-Grooves (VG12-02), FH-80-12 Fiber Holders (pair), USB-02 Cable, Alcohol Dispenser, Quick Reference Guide, TS-04A Splicer Tripod Screw, TS-04B Cleaver Tripod Screw, On-board Instructional Manual, CC-48 Transit Case, ST- 02 Fusion Splicer Strap and Two-year Warranty S018665 Fujikura 100R Fusion Splicer (machine only) Includes: BTR-19 Battery, ADC-22 AC Adapter, ACC-19 AC Cord, ELCT2-16C Spare Electrodes (pair) with spare V-Grooves (VG12-02), FH-80-12 Fiber Holders (pair), USB-02 Cable, Alcohol Dispenser, Quick Reference Guild, TS-04A Splicer Tripod Screw, TS-04B Cleaver Tripod Screw, On-board Instructional Manual, Work Tray, CC-48 Transit Case, and Two-year Warranty S018710 Fujikura 100R Fusion Splicer Kit without Bluetooth with CT60 and RS01 Includes: BTR-19 Battery, ADC-22 AC Adapter, ACC-19 AC Cord, CT-60 Cleaver, RS01 Stripper, ADC-09A AC Adapter with ACC-09 cord, ELCT2-16C Spare Electrodes (pair) with spare V-Grooves (VG12-02), FH-80-12 Fiber Holders (pair), USB-02 Cable, Alcohol Dispenser, Quick Reference Guide, TS-04A Splicer Tripod Screw, TS-04B Cleaver Tripod Screw, On-board Instructional Manual, CC-48 Transit Case, ST-02 Fusion Splicer Strap and Two-year Warranty S018712 Fujikura 100R Fusion Splicer without Bluetooth Includes: BTR-19 Battery, ADC-22 AC Adapter, ACC-19 AC Cord, ELCT2-16C Spare Electrodes (pair) with spare V-Grooves (VG12-02), FH-80-12 Fiber Holders (pair), USB-02 Cable, Alcohol Dispenser, Quick Reference Guide, TS-04A Splicer Tripod Screw, TS-04B Cleaver Tripod Screw, On-board Instructional Manual, CC-48 Transit Case, and Two-year Warranty S018711 One-Year Extended Warranty S012996 Two-Year Extended Warranty S013000 Intelligent Alignment Control Features Auto Placement Correction (before on left; after on right) Gap Alignment Correction (before on left; after on right) 2 AFLglobal.com 1 (800) 235-3423 © 2026, AFL, all rights reserved. PP-4-00140, Revision 1, 5.11.2026 Specifications are subject to change without notice. Fusion Splicing Systems 2 Fujikura 100R Fusion Splicer Recommended Products for the 100R Description AFL No. Cleavers and Strippers CT-60 Cleaver S018654 RS01 Thermal Stripper S016815 RS02 Thermal Stripper S016816 RS03 Thermal Stripper S016817 Fiber Holders and V-Grooves FH-80-2 Fiber Holder S018726 FH-80-4 Fiber Holder S018727 FH-80-5 Fiber Holder S018728 FH-80-6 Fiber Holder S018729 FH-80-8 Fiber Holder S018730 FH-80-9 Fiber Holder S018731 FH-80-10 Fiber Holder S018732 FH-80-12 Fiber Holder S018733 FH-80-12-200 Fiber Holder S018734 FH-80-12PC 200 to 250um Pitch Conversion Fiber Holder S018735 FH-80-16 Fiber Holder S018736 FH-80-16-200 Fiber Holder S018737 FH-80-16PC 200 to 250um Pitch Conversion Fiber Holder S018738 FH-70-250 (250 μm coated fiber) S017111 FH-70-900 (900 μm jacketed fiber) S017113 FH-70-160 (160 μm coated fiber) S017095 FH-60-LT900 (Loose buffer 900 μm fiber) S015181 VG16-02 16 Fiber/250 μ m V-Groove S018739 VG16-02-200 16 Fiber/200 μ m V-Groove S018740 VG12-02 12 Fiber/250 μ m V-Groove S018741 VG12-02-200 12 Fiber/200 μ m V-Groove S018742 VG08-02 8 Fiber/250 μ m V-Groove S018743 VG04-02 4 Fiber/250 μ m V-Groove S018744 FUSEConnect ® Accessories FH-FC-20 (900 μm within 2.0 mm sheathing) (each) S014696 FH-FC-30 (900 μm within 3.0 mm sheathing) (pair) S014695 FH-FC-900 (900 μm cable) (each) S014697 CLAMP-FC-2000 (pair) S014705 Description AFL No. Batteries and Power Cords ADC-22 AC Adapter S018666 BTR-19 Battery S018670 DCC-11 splicer to ribbon stripper power cord S013852 DCC-20 Power Cord Connects ADC-20 to cigarette lighter socket S017527 DCC-21 Power Cord Connects ADC-20 to power source via alligator clips S017528 ACC-14 AC Power Cord S014536 Miscellaneous SS01 Single fiber stripper (1 hole) S017099 ELCT2-16C Electrodes S018669 Portable Splicing Worktray (see product profile for more detail) S014773 ASW-02 Splicing Workstation (see product profile for more detail) S010532 WT-11R Work Tray Right S018674 WT-11L Work Tray Left S018673 JP-12 Work Tray J-Plate (Splicer Mount) S018681 JP-11 J-Plate (Cooling tray attaches to splicer) S018675 TS-04B Cleaver Tripod Screw S018691 TS-04A Splicer Tripod Screw (90 Series) S018677 ST-02 Fusion Splicer Strap S017525 CLAMP-DC-12 (Drop Cable clamp on work tray) S017550 FST-12 Fiber Separation Tool S014012 FAT-04 Fiber Arrangement Tool S010212 RT-02 Fiber Arrangement Tool S017465 FAA-03A Ribbon Forming Adhesive (4 oz. bottle) S008720 FAA-03A Ribbon Forming Adhesive (0.5 liter bottle) S008622 CC-48 Transit Case S018672 Splicer V-groove Cleaning Kit S014397 ST-03 Case and Work Tray Strap S017549 AFL Tote Solution - Cleat Installation Service S018623 Fujikura 100R Fusion Splicer Kit with CT60 and RS03 (S018665) 3 AFLglobal.com 1 (800) 235-3423 © 2026, AFL, all rights reserved. PP-4-00140, Revision 1, 5.11.2026 Specifications are subject to change without notice. Fusion Splicing Systems 3 Fujikura 100R Fusion Splicer Specifications Parameter Value Fiber Alignment Method Self-Cladding alignment with Surface Melting Tension Fiber Count Can Be Spliced Single and up to 16 Fiber Ribbon with Applicable V-groove Applicable Fiber Fiber Type Single-mode Fiber Multimode Fiber Cladding Diameter Approx. 125 μ m Applicable Coating Fiber Holder Coating Shape: Refer to Options Cleave Length: Approx. 10 mm Fiber Splice Performance Splice Loss ITU-T G.652: Avg 0.05 db ITU-T G.651: Avg 0.02 db ITU-T G.653: Avg 0.08 db ITU-T G.655: Avg 0.08 db ITU-T G.657: Avg 0.08 db Splice Time SM Fast Mode: Avg 16 to 18 Seconds SM Auto Mode: Avg 19 to 21 Seconds Applicable Protection Sleeve Sleeve Type Heat Shrinkable Sleeve Sleeve Length Max. 66 mm Sleeve Diameter Max. 6.0 mm before Shrink Sleeve Heat Performance Heat Time 40 mm FP-05 Mode: Avg 33 to 40 Seconds 40 mm FP-04T Fast Mode: Avg 19 to 26 seconds Single 60 mm Mode: Avg. 8 to 15 Seconds Fiber Tensile Test Force Approx. 2.0 N Electrode Life Approx. 1,500 Splices Physical Description Dimensions W 157 mm Dimensions D 178 mm Dimensions H 171 mm Weight 2.6 kg including Battery Environmental Condition Temperature Operate: -10 to +50°C Storage: -40 to +80°C Humidity Operate: 0 to 95% RH non-condensing Storage: 0 to 95% RH non-condensing Altitude Max. 3,700 m AC Adapter Input AC100 to 240V, 50/60Hz, Max. 1.5A Output Approx. DC 12V, max. 7A Battery Pack Type Rechargeable Lithium Ion Output Approximately DC 12 V, Max 5A Capacity Approximately 165 Splices with Heat Shrink Temperature Operate: -10 to +50°C Recharge: 0 to +40°C Storage < One (1) Year: -20 to +20°C Storage < Three (3) Months: -20 to +40°C Storage < One (1) Month: -20 to +50°C Recharge Time ≤ Six (6) Hours from Empty Battery Life Approximately 500 Recharge Cycles Display LCD Monitor TFT 4.95 inch Tough Screen Magnification Approx. 30x: 12-Fiber Ribbon Approx. 90x: Single Fiber Illumination V-Grooves LED Lamp Data Storage Splice Mode 100 splice modes Heat Mode 30 heat modes Splice Result 20,000 splices Splice Image 100 images 4 AFLglobal.com 1 (800) 235-3423 © 2026, AFL, all rights reserved. PP-4-00140, Revision 1, 5.11.2026 Specifications are subject to change without notice. Fusion Splicing Systems 4 Specifications (cont.) Parameter Value Other Features Automatic Functions Splice-mode Select by Fiber Count Analysis Fusion Power Calibration Fully Automatic Cleaver Blade Management Wind Protector: Open and Close Clamp: Auto Clamping Force Adjustment Z-Holder Base: Auto Placement Correction Z-Holder Base: Gap Alignment Correction Splice Start Heater Lid: Open and Close Heater Clamp: Open and Close Heater Start Reference Guide Video and PDF Store on Splicer Electrode Replaceable without Tool Software for PC Splicer Update via Internet Parameter Upload and Download Operating Splicer with PC Splice Image Download to PC GPS Splice Location Recorded to Memory GEO Fencing Screw Hole for Tripod 1/4-20 UNC Fujikura 100R Fusion Splicer 5 AFLglobal.com 1 (800) 235-3423 © 2026, AFL, all rights reserved. PP-4-00140, Revision 1, 5.11.2026 Specifications are subject to change without notice. Fusion Splicing Systems 5